# SPDX-FileCopyrightText: 2021-2023 Blender Authors # # SPDX-License-Identifier: GPL-2.0-or-later import math import os import pathlib import sys import tempfile import unittest from pxr import Ar, Gf, Sdf, Usd, UsdGeom, UsdShade import bpy sys.path.append(str(pathlib.Path(__file__).parent.absolute())) from modules.colored_print import (print_message, use_message_colors) args = None class AbstractUSDTest(unittest.TestCase): @classmethod def setUpClass(cls): cls.testdir = args.testdir if os.environ.get("BLENDER_TEST_COLOR") is not None: use_message_colors() def setUp(self): self._tempdir = tempfile.TemporaryDirectory() self.tempdir = pathlib.Path(self._tempdir.name) self.assertTrue(self.testdir.exists(), 'Test dir {0} should exist'.format(self.testdir)) self.assertTrue(self.tempdir.exists(), 'Temp dir {0} should exist'.format(self.tempdir)) print_message(self._testMethodName, 'SUCCESS', 'RUN') # Make sure we always start with a known-empty file. bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "empty.blend")) def tearDown(self): self._tempdir.cleanup() result = self._outcome.result ok = all(test != self for test, _ in result.errors + result.failures) if not ok: print_message(self._testMethodName, 'FAILURE', 'FAILED') else: print_message(self._testMethodName, 'SUCCESS', 'PASSED') class USDImportTest(AbstractUSDTest): # Utility function to round each component of a vector to a few digits. The "+ 0" is to # ensure that any negative zeros (-0.0) are converted to positive zeros (0.0). @staticmethod def round_vector(vector, digits=5): return [round(c, digits) + 0 for c in vector] def test_import_operator(self): """Test running the import operator on valid and invalid files.""" infile = str(self.testdir / "usd_mesh_polygon_types.usda") res = bpy.ops.wm.usd_import(filepath=infile) self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {infile}") infile = str(self.testdir / "this_file_doesn't_exist.usda") # RPT_ERROR Reports from operators generate `RuntimeError` python exceptions. try: res = bpy.ops.wm.usd_import(filepath=infile) self.assertEqual({'CANCELLED'}, res, "Was somehow able to import a non-existent USD file!") except RuntimeError as e: self.assertTrue(e.args[0].startswith("Error: USD Import: unable to open stage to read")) def test_import_prim_hierarchy(self): """Test importing a simple object hierarchy from a USDA file.""" infile = str(self.testdir / "prim-hierarchy.usda") res = bpy.ops.wm.usd_import(filepath=infile) self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {infile}") objects = bpy.context.scene.collection.objects self.assertEqual(5, len(objects), f"Test scene {infile} should have five objects; found {len(objects)}") # Test the hierarchy. self.assertIsNone(objects['World'].parent, "/World should not be parented.") self.assertEqual(objects['World'], objects['Plane'].parent, "Plane should be child of /World") self.assertEqual(objects['World'], objects['Plane_001'].parent, "Plane_001 should be a child of /World") self.assertEqual(objects['World'], objects['Empty'].parent, "Empty should be a child of /World") self.assertEqual(objects['Empty'], objects['Plane_002'].parent, "Plane_002 should be a child of /World") def test_import_xform_and_mesh_merged_false(self): """Test importing a simple object hierarchy (xform and mesh) from a USDA file.""" infile = str(self.testdir / "usd_mesh_polygon_types.usda") res = bpy.ops.wm.usd_import(filepath=infile, merge_parent_xform=False) self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {infile}") objects = bpy.context.scene.collection.objects self.assertEqual(10, len(objects), f"Test scene {infile} should have ten objects; found {len(objects)}") # Test the hierarchy. self.assertEqual( objects['degenerate'], objects['m_degenerate'].parent, "m_degenerate should be child of /degenerate") self.assertEqual( objects['triangles'], objects['m_triangles'].parent, "m_triangles should be a child of /triangles") self.assertEqual(objects['quad'], objects['m_quad'].parent, "m_quad should be a child of /quad") self.assertEqual(objects['ngon_concave'], objects['m_ngon_concave'].parent, "m_ngon_concave should be a child of /ngon_concave") def test_import_mesh_topology(self): """Test importing meshes with different polygon types.""" infile = str(self.testdir / "usd_mesh_polygon_types.usda") res = bpy.ops.wm.usd_import(filepath=infile) self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {infile}") objects = bpy.context.scene.collection.objects self.assertEqual(5, len(objects), f"Test scene {infile} should have five objects; found {len(objects)}") # Test topology counts. self.assertIn("m_degenerate", objects, "Scene does not contain object m_degenerate") mesh = objects["m_degenerate"].data self.assertEqual(len(mesh.polygons), 0) self.assertEqual(len(mesh.edges), 0) self.assertEqual(len(mesh.vertices), 6) self.assertIn("m_triangles", objects, "Scene does not contain object m_triangles") mesh = objects["m_triangles"].data self.assertEqual(len(mesh.polygons), 2) self.assertEqual(len(mesh.edges), 5) self.assertEqual(len(mesh.vertices), 4) self.assertEqual(len(mesh.polygons[0].vertices), 3) self.assertIn("m_quad", objects, "Scene does not contain object m_quad") mesh = objects["m_quad"].data self.assertEqual(len(mesh.polygons), 1) self.assertEqual(len(mesh.edges), 4) self.assertEqual(len(mesh.vertices), 4) self.assertEqual(len(mesh.polygons[0].vertices), 4) self.assertIn("m_ngon_concave", objects, "Scene does not contain object m_ngon_concave") mesh = objects["m_ngon_concave"].data self.assertEqual(len(mesh.polygons), 1) self.assertEqual(len(mesh.edges), 5) self.assertEqual(len(mesh.vertices), 5) self.assertEqual(len(mesh.polygons[0].vertices), 5) self.assertIn("m_ngon_convex", objects, "Scene does not contain object m_ngon_convex") mesh = objects["m_ngon_convex"].data self.assertEqual(len(mesh.polygons), 1) self.assertEqual(len(mesh.edges), 5) self.assertEqual(len(mesh.vertices), 5) self.assertEqual(len(mesh.polygons[0].vertices), 5) def test_import_mesh_uv_maps(self): """Test importing meshes with udim UVs and multiple UV sets.""" infile = str(self.testdir / "usd_mesh_udim.usda") res = bpy.ops.wm.usd_import(filepath=infile) self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {infile}") objects = bpy.context.scene.collection.objects if "preview" in bpy.data.objects: bpy.data.objects.remove(bpy.data.objects["preview"]) self.assertEqual(1, len(objects), f"File {infile} should contain one object, found {len(objects)}") mesh = bpy.data.objects["uvmap_plane"].data self.assertEqual(len(mesh.uv_layers), 2, f"Object uvmap_plane should have two uv layers, found {len(mesh.uv_layers)}") expected_layer_names = {"udim_map", "uvmap"} imported_layer_names = set(mesh.uv_layers.keys()) self.assertEqual( expected_layer_names, imported_layer_names, f"Expected layer names ({expected_layer_names}) not found on uvmap_plane.") def get_coords(data): coords = [x.uv for x in uvmap] return coords def uv_min_max(data): coords = get_coords(data) uv_min_x = min([uv[0] for uv in coords]) uv_max_x = max([uv[0] for uv in coords]) uv_min_y = min([uv[1] for uv in coords]) uv_max_y = max([uv[1] for uv in coords]) return uv_min_x, uv_max_x, uv_min_y, uv_max_y # Quick tests for point range. uvmap = mesh.uv_layers["uvmap"].data self.assertEqual(len(uvmap), 128) min_x, max_x, min_y, max_y = uv_min_max(uvmap) self.assertGreaterEqual(min_x, 0.0) self.assertGreaterEqual(min_y, 0.0) self.assertLessEqual(max_x, 1.0) self.assertLessEqual(max_y, 1.0) uvmap = mesh.uv_layers["udim_map"].data self.assertEqual(len(uvmap), 128) min_x, max_x, min_y, max_y = uv_min_max(uvmap) self.assertGreaterEqual(min_x, 0.0) self.assertGreaterEqual(min_y, 0.0) self.assertLessEqual(max_x, 2.0) self.assertLessEqual(max_y, 1.0) # Make sure at least some points are in a udim tile. coords = get_coords(uvmap) coords = list(filter(lambda x: x[0] > 1.0, coords)) self.assertGreater(len(coords), 16) def test_import_mesh_subd(self): """Test importing meshes with subdivision attributes.""" # Use the existing mesh subd test file to create the USD file # for import. It is validated as part of the bl_usd_export test. bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "usd_mesh_subd.blend")) testfile = str(self.tempdir / "usd_mesh_subd.usda") bpy.ops.wm.usd_export(filepath=testfile, export_subdivision='BEST_MATCH', evaluation_mode="RENDER") res = bpy.ops.wm.usd_export(filepath=testfile, export_materials=True) self.assertEqual({'FINISHED'}, res, f"Unable to export to {testfile}") # Reload the empty file and import back in bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "empty.blend")) res = bpy.ops.wm.usd_import(filepath=testfile, import_subdiv=True) self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {testfile}") # Validate crease attributes mesh = bpy.data.objects["crease_verts"].data blender_crease_data = [round(d.value, 5) for d in mesh.attributes["crease_vert"].data] self.assertEqual(blender_crease_data, [0.3, 0.0, 0.2, 0.1, 0.8, 0.7, 1.0, 0.9]) mesh = bpy.data.objects["crease_edge"].data blender_crease_data = [round(d.value, 5) for d in mesh.attributes["crease_edge"].data] self.assertEqual( blender_crease_data, [0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 1.0, 0.0, 0.0, 0.0, 0.9, 0.0, 0.0, 0.8, 0.0, 0.0, 0.7, 0.0, 0.0, 0.6, 0.0, 0.0, 0.5, 0.0, 0.0, 0.4, 0.0, 0.0, 0.3, 0.0, 0.0, 0.2, 0.0, 0.0, 0.1, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0]) # Validate SubdivisionSurface modifier settings def check_mod(mesh_name, levels, render_levels, uv_smooth, boundary_smooth): mod = bpy.data.objects[mesh_name].modifiers[0] self.assertEqual(mod.levels, levels) self.assertEqual(mod.render_levels, render_levels) self.assertEqual(mod.uv_smooth, uv_smooth) self.assertEqual(mod.boundary_smooth, boundary_smooth) check_mod("mesh1", 1, 2, 'NONE', 'ALL') check_mod("mesh2", 1, 2, 'PRESERVE_CORNERS', 'ALL') check_mod("mesh3", 1, 2, 'PRESERVE_CORNERS_AND_JUNCTIONS', 'ALL') check_mod("mesh4", 1, 2, 'PRESERVE_CORNERS_JUNCTIONS_AND_CONCAVE', 'ALL') check_mod("mesh5", 1, 2, 'PRESERVE_BOUNDARIES', 'ALL') check_mod("mesh6", 1, 2, 'SMOOTH_ALL', 'ALL') check_mod("mesh7", 1, 2, 'PRESERVE_BOUNDARIES', 'PRESERVE_CORNERS') def test_import_camera_properties(self): """Test importing camera to ensure properties set correctly.""" # This file has metersPerUnit = 1 infile = str(self.testdir / "usd_camera_test_1.usda") res = bpy.ops.wm.usd_import(filepath=infile) self.assertEqual({'FINISHED'}, res) camera_object = bpy.data.objects["Test_Camera"] test_cam = camera_object.data self.assertAlmostEqual(43.12, test_cam.lens, 2) self.assertAlmostEqual(24.89, test_cam.sensor_width, 2) self.assertAlmostEqual(14.00, test_cam.sensor_height, 2) self.assertAlmostEqual(2.281, test_cam.shift_x, 2) self.assertAlmostEqual(0.496, test_cam.shift_y, 2) bpy.ops.object.select_all(action='SELECT') bpy.ops.object.delete() # This file has metersPerUnit = 0.1 infile = str(self.testdir / "usd_camera_test_2.usda") res = bpy.ops.wm.usd_import(filepath=infile) self.assertEqual({'FINISHED'}, res) camera_object = bpy.data.objects["Test_Camera"] test_cam = camera_object.data self.assertAlmostEqual(4.312, test_cam.lens, 3) self.assertAlmostEqual(2.489, test_cam.sensor_width, 3) self.assertAlmostEqual(1.400, test_cam.sensor_height, 3) self.assertAlmostEqual(2.281, test_cam.shift_x, 3) self.assertAlmostEqual(0.496, test_cam.shift_y, 3) def assert_all_nodes_present(self, mat, node_list): nodes = mat.node_tree.nodes self.assertEqual(len(nodes), len(node_list)) for node in node_list: self.assertTrue(nodes.find(node) >= 0, f"Could not find node '{node}' in material '{mat.name}'") def test_import_materials1(self): """Validate UsdPreviewSurface shader graphs.""" # Use the existing materials test file to create the USD file # for import. It is validated as part of the bl_usd_export test. bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "usd_materials_export.blend")) testfile = str(self.tempdir / "usd_materials_export.usda") res = bpy.ops.wm.usd_export(filepath=str(testfile), export_materials=True) self.assertEqual({'FINISHED'}, res, f"Unable to export to {testfile}") # Reload the empty file and import back in bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "empty.blend")) res = bpy.ops.wm.usd_import(filepath=testfile) self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {testfile}") # Most shader graph validation should occur through the Hydra render test suite. Here we # will only check some high-level criteria for each expected node graph. mat = bpy.data.materials["Transforms"] self.assert_all_nodes_present(mat, ["Principled BSDF", "Image Texture", "UV Map", "Mapping", "Material Output"]) node = mat.node_tree.nodes["Mapping"] self.assertEqual(self.round_vector(node.inputs[1].default_value), [0.75, 0.75, 0]) self.assertEqual(self.round_vector(node.inputs[2].default_value), [0, 0, 3.14159]) self.assertEqual(self.round_vector(node.inputs[3].default_value), [0.5, 0.5, 1]) mat = bpy.data.materials["NormalMap"] self.assert_all_nodes_present( mat, ["Principled BSDF", "Image Texture", "UV Map", "Normal Map", "Material Output"]) mat = bpy.data.materials["NormalMap_Scale_Bias"] self.assert_all_nodes_present(mat, ["Principled BSDF", "Image Texture", "UV Map", "Normal Map", "Vector Math", "Vector Math.001", "Material Output"]) node = mat.node_tree.nodes["Vector Math"] self.assertEqual(self.round_vector(node.inputs[1].default_value), [2, -2, 2]) self.assertEqual(self.round_vector(node.inputs[2].default_value), [-1, 1, -1]) def test_import_materials2(self): """Validate UsdPreviewSurface shader graphs.""" # Use the existing materials test file to create the USD file # for import. It is validated as part of the bl_usd_export test. bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "usd_materials_channels.blend")) testfile = str(self.tempdir / "usd_materials_channels.usda") res = bpy.ops.wm.usd_export(filepath=str(testfile), export_materials=True) self.assertEqual({'FINISHED'}, res, f"Unable to export to {testfile}") # Reload the empty file and import back in bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "empty.blend")) res = bpy.ops.wm.usd_import(filepath=testfile) self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {testfile}") # Most shader graph validation should occur through the Hydra render test suite. Here we # will only check some high-level criteria for each expected node graph. mat = bpy.data.materials["Opaque"] self.assert_all_nodes_present(mat, ["Principled BSDF", "Image Texture", "UV Map", "Material Output"]) mat = bpy.data.materials["Alpha"] self.assert_all_nodes_present(mat, ["Principled BSDF", "Image Texture", "UV Map", "Material Output"]) mat = bpy.data.materials["AlphaClip_LessThan"] self.assert_all_nodes_present( mat, ["Principled BSDF", "Image Texture", "UV Map", "Math", "Math.001", "Material Output"]) node = [n for n in mat.node_tree.nodes if n.type == 'MATH' and n.operation == "LESS_THAN"][0] self.assertAlmostEqual(node.inputs[1].default_value, 0.8, 3) mat = bpy.data.materials["AlphaClip_Round"] self.assert_all_nodes_present( mat, ["Principled BSDF", "Image Texture", "UV Map", "Math", "Math.001", "Material Output"]) node = [n for n in mat.node_tree.nodes if n.type == 'MATH' and n.operation == "LESS_THAN"][0] self.assertAlmostEqual(node.inputs[1].default_value, 0.5, 3) mat = bpy.data.materials["Channel"] self.assert_all_nodes_present( mat, ["Principled BSDF", "Image Texture", "Separate Color", "UV Map", "Material Output"]) mat = bpy.data.materials["ChannelClip_LessThan"] self.assert_all_nodes_present( mat, ["Principled BSDF", "Image Texture", "Separate Color", "UV Map", "Math", "Math.001", "Material Output"]) node = [n for n in mat.node_tree.nodes if n.type == 'MATH' and n.operation == "LESS_THAN"][0] self.assertAlmostEqual(node.inputs[1].default_value, 0.2, 3) mat = bpy.data.materials["ChannelClip_Round"] self.assert_all_nodes_present( mat, ["Principled BSDF", "Image Texture", "Separate Color", "UV Map", "Math", "Math.001", "Material Output"]) node = [n for n in mat.node_tree.nodes if n.type == 'MATH' and n.operation == "LESS_THAN"][0] self.assertAlmostEqual(node.inputs[1].default_value, 0.5, 3) def test_import_material_subsets(self): """Validate multiple materials assigned to the same mesh work correctly.""" # Use the existing materials test file to create the USD file # for import. It is validated as part of the bl_usd_export test. bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "usd_materials_multi.blend")) # Ensure the simulation zone data is baked for all relevant frames... for frame in range(1, 5): bpy.context.scene.frame_set(frame) bpy.context.scene.frame_set(1) testfile = str(self.tempdir / "usd_materials_multi.usda") res = bpy.ops.wm.usd_export(filepath=testfile, export_animation=True, evaluation_mode="RENDER") self.assertEqual({'FINISHED'}, res, f"Unable to export to {testfile}") # Reload the empty file and import back in bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "empty.blend")) res = bpy.ops.wm.usd_import(filepath=testfile) self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {testfile}") # The static mesh should have 4 materials each assigned to 4 faces (16 faces total) static_mesh = bpy.data.objects["static_mesh"].data material_index_attr = static_mesh.attributes["material_index"] self.assertEqual(len(static_mesh.materials), 4) self.assertEqual(len(static_mesh.polygons), 16) self.assertEqual(len(material_index_attr.data), 16) for mat_index in range(0, 4): face_indices = [i for i, d in enumerate(material_index_attr.data) if d.value == mat_index] self.assertEqual(len(face_indices), 4, f"Incorrect number of faces with material index {mat_index}") def test_import_material_displacement(self): """Validate correct import of Displacement information for the UsdPreviewSurface""" # Use the existing materials test file to create the USD file # for import. It is validated as part of the bl_usd_export test. bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "usd_materials_displace.blend")) testfile = str(self.tempdir / "temp_material_displace.usda") res = bpy.ops.wm.usd_export(filepath=str(testfile), export_materials=True) self.assertEqual({'FINISHED'}, res, f"Unable to export to {testfile}") # Reload the empty file and import back in bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "empty.blend")) res = bpy.ops.wm.usd_import(filepath=testfile) self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {testfile}") # Most shader graph validation should occur through the Hydra render test suite. Here we # will only check some high-level criteria for each expected node graph. def assert_displacement(mat, height, midlevel, scale): nodes = mat.node_tree.nodes node_displace_index = nodes.find("Displacement") self.assertTrue(node_displace_index >= 0) node_displace = nodes[node_displace_index] if height is not None: self.assertAlmostEqual(node_displace.inputs[0].default_value, height) else: self.assertEqual(len(node_displace.inputs[0].links), 1) self.assertAlmostEqual(node_displace.inputs[1].default_value, midlevel) self.assertAlmostEqual(node_displace.inputs[2].default_value, scale) mat = bpy.data.materials["constant"] assert_displacement(mat, 0.95, 0.5, 1.0) mat = bpy.data.materials["mid_1_0"] assert_displacement(mat, None, 1.0, 1.0) mat = bpy.data.materials["mid_0_5"] assert_displacement(mat, None, 0.5, 1.0) mat = bpy.data.materials["mid_0_0"] assert_displacement(mat, None, 0.0, 1.0) mat = bpy.data.materials["mid_1_0_scale_0_3"] assert_displacement(mat, None, 1.0, 0.3) mat = bpy.data.materials["mid_0_5_scale_0_3"] assert_displacement(mat, None, 0.5, 0.3) mat = bpy.data.materials["mid_0_0_scale_0_3"] assert_displacement(mat, None, 0.0, 0.3) def test_import_material_attributes(self): """Validate correct import of Attribute information from UsdPrimvarReaders""" # Use the existing materials test file to create the USD file # for import. It is validated as part of the bl_usd_export test. bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "usd_materials_attributes.blend")) testfile = str(self.tempdir / "usd_materials_attributes.usda") res = bpy.ops.wm.usd_export(filepath=str(testfile), export_materials=True) self.assertEqual({'FINISHED'}, res, f"Unable to export to {testfile}") # Reload the empty file and import back in bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "empty.blend")) res = bpy.ops.wm.usd_import(filepath=testfile) self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {testfile}") # Most shader graph validation should occur through the Hydra render test suite. Here we # will only check some high-level criteria for each expected node graph. def assert_attribute(mat, attribute_name, from_socket, to_socket): nodes = [n for n in mat.node_tree.nodes if n.type == 'ATTRIBUTE' and n.attribute_name == attribute_name] self.assertTrue(len(nodes) == 1) outputs = [o for o in nodes[0].outputs if o.identifier == from_socket] self.assertTrue(len(outputs) == 1) self.assertTrue(len(outputs[0].links) == 1) link = outputs[0].links[0] self.assertEqual(link.from_socket.identifier, from_socket) self.assertEqual(link.to_socket.identifier, to_socket) mat = bpy.data.materials["Material"] self.assert_all_nodes_present( mat, ["Principled BSDF", "Attribute", "Attribute.001", "Attribute.002", "Material Output"]) assert_attribute(mat, "displayColor", "Color", "Base Color") assert_attribute(mat, "f_vec", "Vector", "Normal") assert_attribute(mat, "f_float", "Fac", "Roughness") def test_import_shader_varname_with_connection(self): """Test importing USD shader where uv primvar is a connection""" varname = "testmap" texfile = str(self.testdir / "textures/test_grid_1001.png") # Create the test USD file. temp_usd_file = str(self.tempdir / "usd_varname_test.usda") stage = Usd.Stage.CreateNew(temp_usd_file) mesh1 = stage.DefinePrim("/mesh1", "Mesh") mesh2 = stage.DefinePrim("/mesh2", "Mesh") # Create two USD preview surface shaders in two materials. m1 = UsdShade.Material.Define(stage, "/mat1") s1 = UsdShade.Shader.Define(stage, "/mat1/previewshader") s1.CreateIdAttr("UsdPreviewSurface") m1.CreateSurfaceOutput().ConnectToSource(s1.ConnectableAPI(), "surface") t1 = UsdShade.Shader.Define(stage, "/mat1/diffuseTexture") t1.CreateIdAttr("UsdUVTexture") t1.CreateInput('file', Sdf.ValueTypeNames.Asset).Set(texfile) t1.CreateOutput("rgb", Sdf.ValueTypeNames.Float3) s1.CreateInput("diffuseColor", Sdf.ValueTypeNames.Color3f).ConnectToSource(t1.ConnectableAPI(), "rgb") t2 = UsdShade.Shader.Define(stage, "/mat1/roughnessTexture") t2.CreateIdAttr("UsdUVTexture") t2.CreateInput('file', Sdf.ValueTypeNames.Asset).Set(texfile) t2.CreateOutput("rgb", Sdf.ValueTypeNames.Float3) s1.CreateInput("roughness", Sdf.ValueTypeNames.Color3f).ConnectToSource(t2.ConnectableAPI(), "rgb") m2 = UsdShade.Material.Define(stage, "/mat2") s2 = UsdShade.Shader.Define(stage, "/mat2/previewshader") s2.CreateIdAttr("UsdPreviewSurface") m2.CreateSurfaceOutput().ConnectToSource(s2.ConnectableAPI(), "surface") t3 = UsdShade.Shader.Define(stage, "/mat2/diffuseTexture") t3.CreateIdAttr("UsdUVTexture") t3.CreateInput('file', Sdf.ValueTypeNames.Asset).Set(texfile) t3.CreateOutput("rgb", Sdf.ValueTypeNames.Float3) s2.CreateInput("diffuseColor", Sdf.ValueTypeNames.Color3f).ConnectToSource(t3.ConnectableAPI(), "rgb") t4 = UsdShade.Shader.Define(stage, "/mat2/roughnessTexture") t4.CreateIdAttr("UsdUVTexture") t4.CreateInput('file', Sdf.ValueTypeNames.Asset).Set(texfile) t4.CreateOutput("rgb", Sdf.ValueTypeNames.Float3) s2.CreateInput("roughness", Sdf.ValueTypeNames.Color3f).ConnectToSource(t4.ConnectableAPI(), "rgb") # Bind mat1 to mesh1, mat2 to mesh2. bindingAPI = UsdShade.MaterialBindingAPI.Apply(mesh1) bindingAPI.Bind(m1) bindingAPI = UsdShade.MaterialBindingAPI.Apply(mesh2) bindingAPI.Bind(m2) # Create varname defined as a token. s3 = UsdShade.Shader.Define(stage, "/mat1/primvar_reader1") s3.CreateIdAttr('UsdPrimvarReader_float2') s3input = s3.CreateInput("varname", Sdf.ValueTypeNames.Token) s3input.Set(varname) t1.CreateInput("st", Sdf.ValueTypeNames.TexCoord2f).ConnectToSource(s3.ConnectableAPI(), "result") # Create varname defined as a connection to a token. varname1 = m1.CreateInput("varname", Sdf.ValueTypeNames.Token) varname1.Set(varname) s4 = UsdShade.Shader.Define(stage, "/mat1/primvar_reader2") s4.CreateIdAttr('UsdPrimvarReader_float2') s4input = s4.CreateInput("varname", Sdf.ValueTypeNames.Token) UsdShade.ConnectableAPI.ConnectToSource(s4input, varname1) t2.CreateInput("st", Sdf.ValueTypeNames.TexCoord2f).ConnectToSource(s4.ConnectableAPI(), "result") # Create varname defined as a string. s5 = UsdShade.Shader.Define(stage, "/mat2/primvar_reader1") s5.CreateIdAttr('UsdPrimvarReader_float2') s5input = s5.CreateInput("varname", Sdf.ValueTypeNames.String) s5input.Set(varname) t3.CreateInput("st", Sdf.ValueTypeNames.TexCoord2f).ConnectToSource(s5.ConnectableAPI(), "result") # Create varname defined as a connection to a string. varname2 = m2.CreateInput("varname", Sdf.ValueTypeNames.String) varname2.Set(varname) s6 = UsdShade.Shader.Define(stage, "/mat2/primvar_reader2") s6.CreateIdAttr('UsdPrimvarReader_float2') s6input = s6.CreateInput("varname", Sdf.ValueTypeNames.String) UsdShade.ConnectableAPI.ConnectToSource(s6input, varname2) t4.CreateInput("st", Sdf.ValueTypeNames.TexCoord2f).ConnectToSource(s6.ConnectableAPI(), "result") stage.Save() # Now import the USD file. res = bpy.ops.wm.usd_import(filepath=temp_usd_file, import_all_materials=True) self.assertEqual({'FINISHED'}, res) # Ensure that we find the correct varname for all four primvar readers. num_uvmaps_found = 0 mats_to_test = [] mats_to_test.append(bpy.data.materials["mat1"]) mats_to_test.append(bpy.data.materials["mat2"]) for mat in mats_to_test: self.assertIsNotNone(mat.node_tree, "Material node tree is empty") for node in mat.node_tree.nodes: if node.type == "UVMAP": self.assertEqual(varname, node.uv_map, "Unexpected value for varname") num_uvmaps_found += 1 self.assertEqual(4, num_uvmaps_found, "One or more test materials failed to import") def test_import_animation(self): """Test importing objects with xform, armature, and USD blend shape animations.""" # Use the existing animation test file to create the USD file # for import. It is validated as part of the bl_usd_export test. bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "usd_anim_test.blend")) testfile = str(self.tempdir / "usd_anim_test.usda") res = bpy.ops.wm.usd_export( filepath=testfile, export_animation=True, evaluation_mode="RENDER", ) self.assertEqual({'FINISHED'}, res, f"Unable to export to {testfile}") # Reload the empty file and import back in bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "empty.blend")) res = bpy.ops.wm.usd_import(filepath=testfile) self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {testfile}") # Validate some simple aspects of the animated objects which prove that they're animating. ob_xform = bpy.data.objects["cube_anim_xform"] ob_xform_child = bpy.data.objects["cube_anim_child_mesh"] ob_shapekeys = bpy.data.objects["cube_anim_keys"] ob_arm = bpy.data.objects["column_anim_armature"] ob_arm2_side_a = bpy.data.objects["side_a"] ob_arm2_side_b = bpy.data.objects["side_b"] self.assertEqual(bpy.data.objects["Armature"].animation_data.action.name, "ArmatureAction_001") bpy.context.scene.frame_set(1) self.assertEqual(len(ob_xform.constraints), 1) self.assertEqual(len(ob_xform_child.constraints), 1) self.assertEqual(self.round_vector(ob_xform.matrix_world.translation), [0.0, -2.0, 0.0]) self.assertEqual(self.round_vector(ob_xform_child.matrix_world.translation), [0.0, -2.0, 1.0]) self.assertEqual(self.round_vector(ob_xform_child.matrix_world.to_euler('XYZ')), [0.0, 0.0, 0.0]) self.assertEqual(self.round_vector(ob_shapekeys.dimensions), [1.0, 1.0, 1.0]) self.assertEqual(self.round_vector(ob_arm.dimensions), [0.4, 0.4, 3.0]) self.assertEqual(self.round_vector(ob_arm2_side_a.dimensions), [0.5, 0.0, 0.5]) self.assertEqual(self.round_vector(ob_arm2_side_b.dimensions), [0.5, 0.0, 0.5]) self.assertAlmostEqual(ob_arm2_side_a.matrix_world.to_euler('XYZ').z, 0, 5) self.assertAlmostEqual(ob_arm2_side_b.matrix_world.to_euler('XYZ').z, 0, 5) bpy.context.scene.frame_set(5) self.assertEqual(len(ob_xform.constraints), 1) self.assertEqual(len(ob_xform_child.constraints), 1) self.assertEqual(self.round_vector(ob_xform.matrix_world.translation), [3.0, -2.0, 0.0]) self.assertEqual(self.round_vector(ob_xform_child.matrix_world.translation), [3.0, -2.0, 1.0]) self.assertEqual(self.round_vector(ob_xform_child.matrix_world.to_euler('XYZ')), [0.0, 1.5708, 0.0]) self.assertEqual(self.round_vector(ob_shapekeys.dimensions), [0.1, 0.1, 0.1]) self.assertEqual(self.round_vector(ob_arm.dimensions), [1.65545, 0.4, 2.38953]) self.assertEqual(self.round_vector(ob_arm2_side_a.dimensions), [0.25, 0.0, 0.25]) self.assertEqual(self.round_vector(ob_arm2_side_b.dimensions), [1.0, 0.0, 1.0]) self.assertAlmostEqual(ob_arm2_side_a.matrix_world.to_euler('XYZ').z, 1.5708, 5) self.assertAlmostEqual(ob_arm2_side_b.matrix_world.to_euler('XYZ').z, 1.5708, 5) def test_import_volumes(self): """Validate volume import.""" # Use the existing volume test file to create the USD file # for import. It is validated as part of the bl_usd_export test. bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "usd_volumes.blend")) # Ensure the simulation zone data is baked for all relevant frames... for frame in range(4, 15): bpy.context.scene.frame_set(frame) bpy.context.scene.frame_set(4) testfile = str(self.tempdir / "usd_volumes.usda") res = bpy.ops.wm.usd_export(filepath=testfile, export_animation=True, evaluation_mode="RENDER") self.assertEqual({'FINISHED'}, res, f"Unable to export to {testfile}") # Reload the empty file and import back in bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "empty.blend")) res = bpy.ops.wm.usd_import(filepath=testfile) self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {testfile}") # Validate that all volumes are properly configured. vol_displace = bpy.data.objects["vol_displace"] vol_filesequence = bpy.data.objects["vol_filesequence"] vol_mesh2vol = bpy.data.objects["vol_mesh2vol"] vol_sim = bpy.data.objects["Volume"] def check_sequence(ob, frames, start, offset): self.assertTrue(ob.data.is_sequence) self.assertEqual(ob.data.frame_duration, frames) self.assertEqual(ob.data.frame_start, start) self.assertEqual(ob.data.frame_offset, offset) check_sequence(vol_displace, 11, 4, 3) check_sequence(vol_filesequence, 6, 8, 13) check_sequence(vol_mesh2vol, 11, 4, 3) check_sequence(vol_sim, 11, 4, 3) # Validate that their object dimensions are changing by spot checking 2 interesting frames bpy.context.scene.frame_set(8) dim_displace = vol_displace.dimensions.copy() dim_filesequence = vol_filesequence.dimensions.copy() dim_mesh2vol = vol_mesh2vol.dimensions.copy() dim_sim = vol_sim.dimensions.copy() bpy.context.scene.frame_set(12) self.assertTrue(vol_displace.dimensions != dim_displace) self.assertTrue(vol_filesequence.dimensions != dim_filesequence) self.assertTrue(vol_mesh2vol.dimensions != dim_mesh2vol) self.assertTrue(vol_sim.dimensions != dim_sim) def test_import_usd_blend_shapes(self): """Test importing USD blend shapes with animated weights.""" infile = str(self.testdir / "usd_blend_shape_test.usda") res = bpy.ops.wm.usd_import(filepath=infile) self.assertEqual({'FINISHED'}, res) obj = bpy.data.objects["Plane"] obj.active_shape_key_index = 1 key = obj.active_shape_key self.assertEqual(key.name, "Key_1", "Unexpected shape key name") # Verify the number of shape key points. self.assertEqual(len(key.data), 4, "Unexpected number of shape key point") # Verify shape key point coordinates # Reference point values. refs = ((-2.51, -1.92, 0.20), (0.86, -1.46, -0.1), (-1.33, 1.29, .84), (1.32, 2.20, -0.42)) for i in range(4): co = key.data[i].co ref = refs[i] # Compare coordinates. for j in range(3): self.assertAlmostEqual(co[j], ref[j], 2) # Verify the shape key values. bpy.context.scene.frame_set(1) self.assertAlmostEqual(key.value, .002, 1) bpy.context.scene.frame_set(30) self.assertAlmostEqual(key.value, .900, 3) bpy.context.scene.frame_set(60) self.assertAlmostEqual(key.value, .100, 3) def test_import_usd_skel_joints(self): """Test importing USD animated skeleton joints.""" infile = str(self.testdir / "arm.usda") res = bpy.ops.wm.usd_import(filepath=infile) self.assertEqual({'FINISHED'}, res) # Verify armature was imported. arm_obj = bpy.data.objects["Skel"] self.assertEqual(arm_obj.type, "ARMATURE", "'Skel' object is not an armature") arm = arm_obj.data bones = arm.bones # Verify bone parenting. self.assertIsNone(bones['Shoulder'].parent, "Shoulder bone should not be parented") self.assertEqual(bones['Shoulder'], bones['Elbow'].parent, "Elbow bone should be child of Shoulder bone") self.assertEqual(bones['Elbow'], bones['Hand'].parent, "Hand bone should be child of Elbow bone") # Verify armature modifier was created on the mesh. mesh_obj = bpy.data.objects['Arm'] # Get all the armature modifiers on the mesh. arm_mods = [m for m in mesh_obj.modifiers if m.type == "ARMATURE"] self.assertEqual(len(arm_mods), 1, "Didn't get expected armatrue modifier") self.assertEqual(arm_mods[0].object, arm_obj, "Armature modifier does not reference the imported armature") # Verify expected deform groups. # There are 4 points in each group. for i in range(4): self.assertAlmostEqual(mesh_obj.vertex_groups['Hand'].weight( i), 1.0, 2, "Unexpected weight for Hand deform vert") self.assertAlmostEqual(mesh_obj.vertex_groups['Shoulder'].weight( 4 + i), 1.0, 2, "Unexpected weight for Shoulder deform vert") self.assertAlmostEqual(mesh_obj.vertex_groups['Elbow'].weight( 8 + i), 1.0, 2, "Unexpected weight for Elbow deform vert") action = bpy.data.actions['Anim1'] # Verify the Elbow joint rotation animation. curve_path = 'pose.bones["Elbow"].rotation_quaternion' # Quat W f = action.fcurves.find(curve_path, index=0) self.assertIsNotNone(f, "Couldn't find Elbow rotation quaternion W curve") self.assertAlmostEqual(f.evaluate(0), 1.0, 2, "Unexpected value for rotation quaternion W curve at frame 0") self.assertAlmostEqual(f.evaluate(10), 0.707, 2, "Unexpected value for rotation quaternion W curve at frame 10") # Quat X f = action.fcurves.find(curve_path, index=1) self.assertIsNotNone(f, "Couldn't find Elbow rotation quaternion X curve") self.assertAlmostEqual(f.evaluate(0), 0.0, 2, "Unexpected value for rotation quaternion X curve at frame 0") self.assertAlmostEqual(f.evaluate(10), 0.707, 2, "Unexpected value for rotation quaternion X curve at frame 10") # Quat Y f = action.fcurves.find(curve_path, index=2) self.assertIsNotNone(f, "Couldn't find Elbow rotation quaternion Y curve") self.assertAlmostEqual(f.evaluate(0), 0.0, 2, "Unexpected value for rotation quaternion Y curve at frame 0") self.assertAlmostEqual(f.evaluate(10), 0.0, 2, "Unexpected value for rotation quaternion Y curve at frame 10") # Quat Z f = action.fcurves.find(curve_path, index=3) self.assertIsNotNone(f, "Couldn't find Elbow rotation quaternion Z curve") self.assertAlmostEqual(f.evaluate(0), 0.0, 2, "Unexpected value for rotation quaternion Z curve at frame 0") self.assertAlmostEqual(f.evaluate(10), 0.0, 2, "Unexpected value for rotation quaternion Z curve at frame 10") def check_curve(self, blender_curve, usd_curve): curve_type_map = {"linear": 1, "cubic-bezier": 2, "cubic-bspline": 3} cyclic_map = {"nonperiodic": False, "periodic": True} # Check correct spline count. blender_spline_count = len(blender_curve.attributes["curve_type"].data) usd_spline_count = len(usd_curve.GetCurveVertexCountsAttr().Get()) self.assertEqual(blender_spline_count, usd_spline_count) # Check correct type of curve. All splines should have the same type and periodicity. usd_curve_type = usd_curve.GetTypeAttr().Get() usd_curve_type_basis = usd_curve_type if usd_curve_type != "linear": usd_curve_type_basis = usd_curve_type + "-" + usd_curve.GetBasisAttr().Get() usd_cyclic = usd_curve.GetWrapAttr().Get() expected_curve_type = curve_type_map[usd_curve_type_basis] expected_cyclic = cyclic_map[usd_cyclic] for i in range(0, blender_spline_count): blender_curve_type = blender_curve.attributes["curve_type"].data[i].value blender_cyclic = False if "cyclic" in blender_curve.attributes: blender_cyclic = blender_curve.attributes["cyclic"].data[i].value self.assertEqual(blender_curve_type, expected_curve_type) self.assertEqual(blender_cyclic, expected_cyclic) # Check position data. usd_positions = usd_curve.GetPointsAttr().Get() blender_positions = blender_curve.attributes["position"].data point_count = 0 if usd_curve_type_basis == "linear": point_count = len(usd_positions) self.assertEqual(len(blender_positions), point_count) elif usd_curve_type_basis == "cubic-bezier": control_point_count = 0 usd_vert_counts = usd_curve.GetCurveVertexCountsAttr().Get() for i in range(0, usd_spline_count): if usd_cyclic == "nonperiodic": control_point_count += (int(usd_vert_counts[i] / 3) + 1) else: control_point_count += (int(usd_vert_counts[i] / 3)) point_count = control_point_count self.assertEqual(len(blender_positions), point_count) elif usd_curve_type_basis == "cubic-bspline": point_count = len(usd_positions) self.assertEqual(len(blender_positions), point_count) # Check radius data. (note: the currently available bsplines have no radii) if usd_curve_type_basis == "cubic-bspline": return usd_width_interpolation = usd_curve.GetWidthsInterpolation() usd_radius = [w / 2 for w in usd_curve.GetWidthsAttr().Get()] blender_radius = [r.value for r in blender_curve.attributes["radius"].data] if usd_curve_type_basis == "linear": if usd_width_interpolation == "constant": usd_radius = usd_radius * point_count for i in range(0, len(blender_radius)): self.assertAlmostEqual(blender_radius[i], usd_radius[i], 2) elif usd_curve_type_basis == "cubic-bezier": if usd_width_interpolation == "constant": usd_radius = usd_radius * point_count for i in range(0, len(blender_radius)): self.assertAlmostEqual(blender_radius[i], usd_radius[i], 2) elif usd_width_interpolation == "varying": # Do a quick min/max sanity check instead of reimplementing width interpolation usd_min = min(usd_radius) usd_max = max(usd_radius) blender_min = min(blender_radius) blender_max = max(blender_radius) self.assertAlmostEqual(blender_min, usd_min, 2) self.assertAlmostEqual(blender_max, usd_max, 2) elif usd_width_interpolation == "vertex": # Do a quick check to ensure radius has been set at all self.assertEqual(True, all([r > 0 and r < 1 for r in blender_radius])) def test_import_curves_linear(self): """Test importing linear curve variations.""" infile = str(self.testdir / "usd_curve_linear_all.usda") res = bpy.ops.wm.usd_import(filepath=infile) self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {infile}") curves = [o for o in bpy.data.objects if o.type == 'CURVES'] self.assertEqual(8, len(curves), f"Test scene {infile} should have 8 curves; found {len(curves)}") stage = Usd.Stage.Open(infile) blender_curve = bpy.data.objects["linear_nonperiodic_single_constant"].data usd_prim = stage.GetPrimAtPath("/root/linear_nonperiodic/single/linear_nonperiodic_single_constant") self.check_curve(blender_curve, UsdGeom.BasisCurves(usd_prim)) blender_curve = bpy.data.objects["linear_nonperiodic_single_varying"].data usd_prim = stage.GetPrimAtPath("/root/linear_nonperiodic/single/linear_nonperiodic_single_varying") self.check_curve(blender_curve, UsdGeom.BasisCurves(usd_prim)) blender_curve = bpy.data.objects["linear_nonperiodic_multiple_constant"].data usd_prim = stage.GetPrimAtPath("/root/linear_nonperiodic/multiple/linear_nonperiodic_multiple_constant") self.check_curve(blender_curve, UsdGeom.BasisCurves(usd_prim)) blender_curve = bpy.data.objects["linear_nonperiodic_multiple_varying"].data usd_prim = stage.GetPrimAtPath("/root/linear_nonperiodic/multiple/linear_nonperiodic_multiple_varying") self.check_curve(blender_curve, UsdGeom.BasisCurves(usd_prim)) blender_curve = bpy.data.objects["linear_periodic_single_constant"].data usd_prim = stage.GetPrimAtPath("/root/linear_periodic/single/linear_periodic_single_constant") self.check_curve(blender_curve, UsdGeom.BasisCurves(usd_prim)) blender_curve = bpy.data.objects["linear_periodic_single_varying"].data usd_prim = stage.GetPrimAtPath("/root/linear_periodic/single/linear_periodic_single_varying") self.check_curve(blender_curve, UsdGeom.BasisCurves(usd_prim)) blender_curve = bpy.data.objects["linear_periodic_multiple_constant"].data usd_prim = stage.GetPrimAtPath("/root/linear_periodic/multiple/linear_periodic_multiple_constant") self.check_curve(blender_curve, UsdGeom.BasisCurves(usd_prim)) blender_curve = bpy.data.objects["linear_periodic_multiple_varying"].data usd_prim = stage.GetPrimAtPath("/root/linear_periodic/multiple/linear_periodic_multiple_varying") self.check_curve(blender_curve, UsdGeom.BasisCurves(usd_prim)) def test_import_curves_bezier(self): """Test importing bezier curve variations.""" infile = str(self.testdir / "usd_curve_bezier_all.usda") res = bpy.ops.wm.usd_import(filepath=infile) self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {infile}") curves = [o for o in bpy.data.objects if o.type == 'CURVES'] self.assertEqual(12, len(curves), f"Test scene {infile} should have 12 curves; found {len(curves)}") stage = Usd.Stage.Open(infile) blender_curve = bpy.data.objects["bezier_nonperiodic_single_constant"].data usd_prim = stage.GetPrimAtPath("/root/bezier_nonperiodic/single/bezier_nonperiodic_single_constant") self.check_curve(blender_curve, UsdGeom.BasisCurves(usd_prim)) blender_curve = bpy.data.objects["bezier_nonperiodic_single_varying"].data usd_prim = stage.GetPrimAtPath("/root/bezier_nonperiodic/single/bezier_nonperiodic_single_varying") self.check_curve(blender_curve, UsdGeom.BasisCurves(usd_prim)) blender_curve = bpy.data.objects["bezier_nonperiodic_single_vertex"].data usd_prim = stage.GetPrimAtPath("/root/bezier_nonperiodic/single/bezier_nonperiodic_single_vertex") self.check_curve(blender_curve, UsdGeom.BasisCurves(usd_prim)) blender_curve = bpy.data.objects["bezier_nonperiodic_multiple_constant"].data usd_prim = stage.GetPrimAtPath("/root/bezier_nonperiodic/multiple/bezier_nonperiodic_multiple_constant") self.check_curve(blender_curve, UsdGeom.BasisCurves(usd_prim)) blender_curve = bpy.data.objects["bezier_nonperiodic_multiple_varying"].data usd_prim = stage.GetPrimAtPath("/root/bezier_nonperiodic/multiple/bezier_nonperiodic_multiple_varying") self.check_curve(blender_curve, UsdGeom.BasisCurves(usd_prim)) blender_curve = bpy.data.objects["bezier_nonperiodic_multiple_vertex"].data usd_prim = stage.GetPrimAtPath("/root/bezier_nonperiodic/multiple/bezier_nonperiodic_multiple_vertex") self.check_curve(blender_curve, UsdGeom.BasisCurves(usd_prim)) blender_curve = bpy.data.objects["bezier_periodic_single_constant"].data usd_prim = stage.GetPrimAtPath("/root/bezier_periodic/single/bezier_periodic_single_constant") self.check_curve(blender_curve, UsdGeom.BasisCurves(usd_prim)) blender_curve = bpy.data.objects["bezier_periodic_single_varying"].data usd_prim = stage.GetPrimAtPath("/root/bezier_periodic/single/bezier_periodic_single_varying") self.check_curve(blender_curve, UsdGeom.BasisCurves(usd_prim)) blender_curve = bpy.data.objects["bezier_periodic_single_vertex"].data usd_prim = stage.GetPrimAtPath("/root/bezier_periodic/single/bezier_periodic_single_vertex") self.check_curve(blender_curve, UsdGeom.BasisCurves(usd_prim)) blender_curve = bpy.data.objects["bezier_periodic_multiple_constant"].data usd_prim = stage.GetPrimAtPath("/root/bezier_periodic/multiple/bezier_periodic_multiple_constant") self.check_curve(blender_curve, UsdGeom.BasisCurves(usd_prim)) blender_curve = bpy.data.objects["bezier_periodic_multiple_varying"].data usd_prim = stage.GetPrimAtPath("/root/bezier_periodic/multiple/bezier_periodic_multiple_varying") self.check_curve(blender_curve, UsdGeom.BasisCurves(usd_prim)) blender_curve = bpy.data.objects["bezier_periodic_multiple_vertex"].data usd_prim = stage.GetPrimAtPath("/root/bezier_periodic/multiple/bezier_periodic_multiple_vertex") self.check_curve(blender_curve, UsdGeom.BasisCurves(usd_prim)) def test_import_curves_bspline(self): """Test importing bspline curve variations.""" # Use the existing hair test file to create the USD file # for import. It is validated as part of the bl_usd_export test. bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "usd_particle_hair.blend")) testfile = str(self.tempdir / "usd_particle_hair.usda") res = bpy.ops.wm.usd_export(filepath=testfile, export_hair=True, evaluation_mode="RENDER") self.assertEqual({'FINISHED'}, res, f"Unable to export to {testfile}") # Reload the empty file and import back in bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "empty.blend")) res = bpy.ops.wm.usd_import(filepath=testfile) self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {testfile}") stage = Usd.Stage.Open(testfile) blender_curve = bpy.data.objects["ParticleSystem"].data usd_prim = stage.GetPrimAtPath("/root/Sphere/ParticleSystem") self.check_curve(blender_curve, UsdGeom.BasisCurves(usd_prim)) def test_import_point_instancer(self): """Test importing a typical point instancer setup.""" infile = str(self.testdir / "usd_nested_point_instancer.usda") res = bpy.ops.wm.usd_import(filepath=infile) self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {infile}") pointclouds = [o for o in bpy.data.objects if o.type == 'POINTCLOUD'] self.assertEqual( 2, len(pointclouds), f"Test scene {infile} should have 2 pointclouds; found {len(pointclouds)}") vertical_points = len(bpy.data.pointclouds['verticalpoints'].attributes["position"].data) horizontal_points = len(bpy.data.pointclouds['horizontalpoints'].attributes["position"].data) self.assertEqual(3, vertical_points) self.assertEqual(2, horizontal_points) def test_import_point_instancer_animation(self): """Test importing an animated point instancer setup.""" infile = str(self.testdir / "usd_point_instancer_anim.usda") res = bpy.ops.wm.usd_import(filepath=infile) self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {infile}") prev_unique_positions = set() prev_unique_scales = set() prev_unique_quats = set() # Check all frames to ensure instances are moving correctly for frame in range(1, 5): bpy.context.scene.frame_set(frame) depsgraph = bpy.context.evaluated_depsgraph_get() # Gather the instance data in a set so we can detect unique values unique_positions = set() unique_scales = set() unique_quats = set() mesh_count = 0 for inst in depsgraph.object_instances: if inst.is_instance and inst.object.type == 'MESH': mesh_count += 1 unique_positions.add(tuple(self.round_vector(inst.matrix_world.to_translation()))) unique_scales.add(tuple(self.round_vector(inst.matrix_world.to_scale(), 1))) unique_quats.add(tuple(self.round_vector(inst.matrix_world.to_quaternion()))) # There should be 6 total mesh instances self.assertEqual(mesh_count, 6) # Positions: All positions should be unique during each frame. # Scale and Orientation: One unique value on frame 1. Subsequent frames have different # combinations of unique values. self.assertEqual(len(unique_positions), 6, f"Frame {frame}: positions are unexpected") if frame == 1: self.assertEqual(len(unique_scales), 1, f"Frame {frame}: scales are unexpected") self.assertEqual(len(unique_quats), 1, f"Frame {frame}: orientations are unexpected") else: self.assertEqual(len(unique_scales), 2, f"Frame {frame}: scales are unexpected") self.assertEqual(len(unique_quats), 3, f"Frame {frame}: orientations are unexpected") # Every frame is different. Ensure that the current frame's values do NOT match the # previous frame's data. self.assertNotEqual(unique_positions, prev_unique_positions) self.assertNotEqual(unique_scales, prev_unique_scales) self.assertNotEqual(unique_quats, prev_unique_quats) prev_unique_positions = unique_positions prev_unique_scales = unique_scales prev_unique_quats = unique_quats def test_import_light_types(self): """Test importing light types and attributes.""" def rename_active(new_name): active_ob = bpy.context.view_layer.objects.active active_ob.name = new_name active_ob.data.name = new_name # Use the current scene to first create and export the lights bpy.ops.object.light_add(type='POINT', align='WORLD', location=(0, 0, 0), scale=(1, 1, 1)) bpy.context.active_object.data.energy = 2 bpy.context.active_object.data.shadow_soft_size = 2.2 bpy.ops.object.light_add(type='SPOT', align='WORLD', location=(0, 0, 0), scale=(1, 1, 1)) rename_active("Spot") bpy.context.active_object.data.energy = 3 bpy.context.active_object.data.shadow_soft_size = 3.3 bpy.context.active_object.data.spot_blend = 0.25 bpy.context.active_object.data.spot_size = math.radians(60) bpy.ops.object.light_add(type='SPOT', align='WORLD', location=(0, 0, 0), scale=(1, 1, 1)) rename_active("Spot_point") bpy.context.active_object.data.energy = 3.5 bpy.context.active_object.data.shadow_soft_size = 0 bpy.context.active_object.data.spot_blend = 0.25 bpy.context.active_object.data.spot_size = math.radians(60) bpy.ops.object.light_add(type='SUN', align='WORLD', location=(0, 0, 0), scale=(1, 1, 1)) bpy.context.active_object.data.energy = 4 bpy.context.active_object.data.angle = math.radians(1) bpy.ops.object.light_add(type='AREA', align='WORLD', location=(0, 0, 0), scale=(1, 1, 1)) rename_active("Area_rect") bpy.context.active_object.data.energy = 5 bpy.context.active_object.data.shape = 'RECTANGLE' bpy.context.active_object.data.size = 0.5 bpy.context.active_object.data.size_y = 1.5 bpy.ops.object.light_add(type='AREA', align='WORLD', location=(0, 0, 0), scale=(1, 1, 1)) rename_active("Area_square") bpy.context.active_object.data.energy = 5.5 bpy.context.active_object.data.shape = 'SQUARE' bpy.context.active_object.data.size = 0.7 bpy.ops.object.light_add(type='AREA', align='WORLD', location=(0, 0, 0), scale=(1, 1, 1)) rename_active("Area_disk") bpy.context.active_object.data.energy = 6 bpy.context.active_object.data.shape = 'DISK' bpy.context.active_object.data.size = 2 bpy.ops.object.light_add(type='AREA', align='WORLD', location=(0, 0, 0), scale=(1, 1, 1)) rename_active("Area_ellipse") bpy.context.active_object.data.energy = 6.5 bpy.context.active_object.data.shape = 'ELLIPSE' bpy.context.active_object.data.size = 3 bpy.context.active_object.data.size_y = 5 test_path = self.tempdir / "temp_lights.usda" res = bpy.ops.wm.usd_export(filepath=str(test_path), evaluation_mode="RENDER") self.assertEqual({'FINISHED'}, res, f"Unable to export to {test_path}") # Reload the empty file and import back in bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "empty.blend")) infile = str(test_path) res = bpy.ops.wm.usd_import(filepath=infile) self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {infile}") lights = [o for o in bpy.data.objects if o.type == 'LIGHT'] self.assertEqual(8, len(lights), f"Test scene {infile} should have 8 lights; found {len(lights)}") blender_light = bpy.data.lights["Point"] self.assertAlmostEqual(blender_light.energy, 2, 3) self.assertAlmostEqual(blender_light.shadow_soft_size, 2.2, 3) blender_light = bpy.data.lights["Spot"] self.assertAlmostEqual(blender_light.energy, 3, 3) self.assertAlmostEqual(blender_light.shadow_soft_size, 3.3, 3) self.assertAlmostEqual(blender_light.spot_blend, 0.25, 3) self.assertAlmostEqual(blender_light.spot_size, math.radians(60), 3) blender_light = bpy.data.lights["Spot_point"] self.assertAlmostEqual(blender_light.energy, 3.5, 3) self.assertAlmostEqual(blender_light.shadow_soft_size, 0, 3) self.assertAlmostEqual(blender_light.spot_blend, 0.25, 3) self.assertAlmostEqual(blender_light.spot_size, math.radians(60), 3) blender_light = bpy.data.lights["Sun"] self.assertAlmostEqual(blender_light.energy, 4, 3) self.assertAlmostEqual(blender_light.angle, math.radians(1), 3) blender_light = bpy.data.lights["Area_rect"] self.assertAlmostEqual(blender_light.energy, 5, 3) self.assertEqual(blender_light.shape, 'RECTANGLE') self.assertAlmostEqual(blender_light.size, 0.5, 3) self.assertAlmostEqual(blender_light.size_y, 1.5, 3) blender_light = bpy.data.lights["Area_square"] self.assertAlmostEqual(blender_light.energy, 5.5, 3) self.assertEqual(blender_light.shape, 'RECTANGLE') # We read as rectangle to mirror what USD supports self.assertAlmostEqual(blender_light.size, 0.7, 3) blender_light = bpy.data.lights["Area_disk"] self.assertAlmostEqual(blender_light.energy, 6, 3) self.assertEqual(blender_light.shape, 'DISK') self.assertAlmostEqual(blender_light.size, 2, 3) blender_light = bpy.data.lights["Area_ellipse"] self.assertAlmostEqual(blender_light.energy, 6.5, 3) self.assertEqual(blender_light.shape, 'DISK') # We read as disk to mirror what USD supports self.assertAlmostEqual(blender_light.size, 4, 3) def test_import_dome_lights(self): """Test importing dome lights and verify their rotations.""" # Test files and their expected EnvironmentTexture Mapping rotation values tests = [ ("usd_dome_light_1_stageZ_poleY.usda", [0.0, 0.0, 0.0]), ("usd_dome_light_1_stageZ_poleZ.usda", [0.0, -1.5708, 0.0]), ("usd_dome_light_1_stageY_poleDefault.usda", [-1.5708, 0.0, 0.0]) ] for test_name, expected_rot in tests: bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "empty.blend")) infile = str(self.testdir / test_name) res = bpy.ops.wm.usd_import(filepath=infile) self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {infile}") # Validate that the Mapping node on the World Material is set to the correct rotation world = bpy.data.worlds["World"] node = world.node_tree.nodes["Mapping"] self.assertEqual( self.round_vector(node.inputs[2].default_value), expected_rot, f"Incorrect rotation for {test_name}") def check_attribute(self, blender_data, attribute_name, domain, data_type, elements_len): attr = blender_data.attributes[attribute_name] self.assertEqual(attr.domain, domain) self.assertEqual(attr.data_type, data_type) self.assertEqual(len(attr.data), elements_len) def check_attribute_missing(self, blender_data, attribute_name): self.assertFalse(attribute_name in blender_data.attributes) def test_import_attributes(self): """Test importing objects with all attribute data types.""" # Use the existing attributes test file to create the USD file # for import. It is validated as part of the bl_usd_export test. bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "usd_attribute_test.blend")) testfile = str(self.tempdir / "usd_attribute_test.usda") res = bpy.ops.wm.usd_export(filepath=testfile, evaluation_mode="RENDER") self.assertEqual({'FINISHED'}, res, f"Unable to export to {testfile}") # Reload the empty file and import back in bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "empty.blend")) res = bpy.ops.wm.usd_import(filepath=testfile) self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {testfile}") # Verify all attributes on the Mesh # Note: USD does not support signed 8-bit types so there is # currently no equivalent to Blender's INT8 data type # TODO: Blender is missing support for reading USD matrix data types mesh = bpy.data.objects["Mesh"].data self.check_attribute(mesh, "p_bool", 'POINT', 'BOOLEAN', 4) self.check_attribute(mesh, "p_int8", 'POINT', 'INT8', 4) self.check_attribute(mesh, "p_int32", 'POINT', 'INT', 4) self.check_attribute(mesh, "p_float", 'POINT', 'FLOAT', 4) self.check_attribute(mesh, "p_byte_color", 'POINT', 'FLOAT_COLOR', 4) self.check_attribute(mesh, "p_color", 'POINT', 'FLOAT_COLOR', 4) self.check_attribute(mesh, "p_vec2", 'CORNER', 'FLOAT2', 4) # TODO: Bug - wrong domain self.check_attribute(mesh, "p_vec3", 'POINT', 'FLOAT_VECTOR', 4) self.check_attribute(mesh, "p_quat", 'POINT', 'QUATERNION', 4) self.check_attribute_missing(mesh, "p_mat4x4") self.check_attribute(mesh, "f_bool", 'FACE', 'BOOLEAN', 1) self.check_attribute(mesh, "f_int8", 'FACE', 'INT8', 1) self.check_attribute(mesh, "f_int32", 'FACE', 'INT', 1) self.check_attribute(mesh, "f_float", 'FACE', 'FLOAT', 1) self.check_attribute(mesh, "f_byte_color", 'FACE', 'FLOAT_COLOR', 1) self.check_attribute(mesh, "f_color", 'FACE', 'FLOAT_COLOR', 1) self.check_attribute(mesh, "f_vec2", 'FACE', 'FLOAT2', 1) self.check_attribute(mesh, "f_vec3", 'FACE', 'FLOAT_VECTOR', 1) self.check_attribute(mesh, "f_quat", 'FACE', 'QUATERNION', 1) self.check_attribute_missing(mesh, "f_mat4x4") self.check_attribute(mesh, "fc_bool", 'CORNER', 'BOOLEAN', 4) self.check_attribute(mesh, "fc_int8", 'CORNER', 'INT8', 4) self.check_attribute(mesh, "fc_int32", 'CORNER', 'INT', 4) self.check_attribute(mesh, "fc_float", 'CORNER', 'FLOAT', 4) self.check_attribute(mesh, "fc_byte_color", 'CORNER', 'FLOAT_COLOR', 4) self.check_attribute(mesh, "fc_color", 'CORNER', 'FLOAT_COLOR', 4) self.check_attribute(mesh, "displayColor", 'CORNER', 'FLOAT_COLOR', 4) self.check_attribute(mesh, "fc_vec2", 'CORNER', 'FLOAT2', 4) self.check_attribute(mesh, "fc_vec3", 'CORNER', 'FLOAT_VECTOR', 4) self.check_attribute(mesh, "fc_quat", 'CORNER', 'QUATERNION', 4) self.check_attribute_missing(mesh, "fc_mat4x4") # Find the non "bezier" Curves object -- Has 2 curves (12 vertices each) all_curves = [o for o in bpy.data.objects if o.type == 'CURVES'] curves = [o for o in all_curves if not o.parent.name.startswith("Curve_bezier")] curves = curves[0].data self.check_attribute(curves, "p_bool", 'POINT', 'BOOLEAN', 24) self.check_attribute(curves, "p_int8", 'POINT', 'INT8', 24) self.check_attribute(curves, "p_int32", 'POINT', 'INT', 24) self.check_attribute(curves, "p_float", 'POINT', 'FLOAT', 24) self.check_attribute(curves, "p_byte_color", 'POINT', 'FLOAT_COLOR', 24) self.check_attribute(curves, "p_color", 'POINT', 'FLOAT_COLOR', 24) self.check_attribute(curves, "p_vec2", 'POINT', 'FLOAT2', 24) self.check_attribute(curves, "p_vec3", 'POINT', 'FLOAT_VECTOR', 24) self.check_attribute(curves, "p_quat", 'POINT', 'QUATERNION', 24) self.check_attribute_missing(curves, "p_mat4x4") self.check_attribute(curves, "sp_bool", 'CURVE', 'BOOLEAN', 2) self.check_attribute(curves, "sp_int8", 'CURVE', 'INT8', 2) self.check_attribute(curves, "sp_int32", 'CURVE', 'INT', 2) self.check_attribute(curves, "sp_float", 'CURVE', 'FLOAT', 2) self.check_attribute(curves, "sp_byte_color", 'CURVE', 'FLOAT_COLOR', 2) self.check_attribute(curves, "sp_color", 'CURVE', 'FLOAT_COLOR', 2) self.check_attribute(curves, "sp_vec2", 'CURVE', 'FLOAT2', 2) self.check_attribute(curves, "sp_vec3", 'CURVE', 'FLOAT_VECTOR', 2) self.check_attribute(curves, "sp_quat", 'CURVE', 'QUATERNION', 2) self.check_attribute_missing(curves, "sp_mat4x4") # Find the "bezier" Curves object -- Has 3 curves (2, 3, and 5 control points) curves = [o for o in all_curves if o.parent.name.startswith("Curve_bezier")] curves = curves[0].data self.check_attribute(curves, "p_bool", 'POINT', 'BOOLEAN', 10) self.check_attribute(curves, "p_int8", 'POINT', 'INT8', 10) self.check_attribute(curves, "p_int32", 'POINT', 'INT', 10) self.check_attribute(curves, "p_float", 'POINT', 'FLOAT', 10) self.check_attribute(curves, "p_byte_color", 'POINT', 'FLOAT_COLOR', 10) self.check_attribute(curves, "p_color", 'POINT', 'FLOAT_COLOR', 10) self.check_attribute(curves, "p_vec2", 'POINT', 'FLOAT2', 10) self.check_attribute(curves, "p_vec3", 'POINT', 'FLOAT_VECTOR', 10) self.check_attribute(curves, "p_quat", 'POINT', 'QUATERNION', 10) self.check_attribute_missing(curves, "p_mat4x4") self.check_attribute(curves, "sp_bool", 'CURVE', 'BOOLEAN', 3) self.check_attribute(curves, "sp_int8", 'CURVE', 'INT8', 3) self.check_attribute(curves, "sp_int32", 'CURVE', 'INT', 3) self.check_attribute(curves, "sp_float", 'CURVE', 'FLOAT', 3) self.check_attribute(curves, "sp_byte_color", 'CURVE', 'FLOAT_COLOR', 3) self.check_attribute(curves, "sp_color", 'CURVE', 'FLOAT_COLOR', 3) self.check_attribute(curves, "sp_vec2", 'CURVE', 'FLOAT2', 3) self.check_attribute(curves, "sp_vec3", 'CURVE', 'FLOAT_VECTOR', 3) self.check_attribute(curves, "sp_quat", 'CURVE', 'QUATERNION', 3) self.check_attribute_missing(curves, "sp_mat4x4") def test_import_attributes_varying(self): """Test importing objects with time-varying positions, velocities, and attributes.""" # Use the existing attributes test file to create the USD file # for import. It is validated as part of the bl_usd_export test. bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "usd_attribute_varying_test.blend")) for frame in range(1, 16): bpy.context.scene.frame_set(frame) bpy.context.scene.frame_set(1) testfile = str(self.tempdir / "usd_attribute_varying_test.usda") res = bpy.ops.wm.usd_export(filepath=testfile, export_animation=True, evaluation_mode="RENDER") self.assertEqual({'FINISHED'}, res, f"Unable to export to {testfile}") # Reload the empty file and import back in bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "empty.blend")) res = bpy.ops.wm.usd_import(filepath=testfile) self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {testfile}") stage = Usd.Stage.Open(testfile) # # Validate Mesh data # blender_mesh = [bpy.data.objects["mesh1"], bpy.data.objects["mesh2"], bpy.data.objects["mesh3"]] usd_mesh = [UsdGeom.Mesh(stage.GetPrimAtPath("/root/mesh1/mesh1")), UsdGeom.Mesh(stage.GetPrimAtPath("/root/mesh2/mesh2")), UsdGeom.Mesh(stage.GetPrimAtPath("/root/mesh3/mesh3"))] mesh_num = len(blender_mesh) # A MeshSequenceCache modifier should be present on every imported object for i in range(0, mesh_num): self.assertTrue(len(blender_mesh[i].modifiers) == 1 and blender_mesh[i].modifiers[0].type == 'MESH_SEQUENCE_CACHE', f"{blender_mesh[i].name} has incorrect modifiers") # Compare Blender and USD data against each other for every frame for frame in range(1, 16): bpy.context.scene.frame_set(frame) depsgraph = bpy.context.evaluated_depsgraph_get() for i in range(0, mesh_num): blender_mesh[i] = bpy.data.objects["mesh" + str(i + 1)].evaluated_get(depsgraph) # Check positions, velocity, and test data for i in range(0, mesh_num): blender_pos_data = [self.round_vector(d.vector) for d in blender_mesh[i].data.attributes["position"].data] blender_vel_data = [self.round_vector(d.vector) for d in blender_mesh[i].data.attributes["velocity"].data] blender_test_data = [round(d.value, 5) for d in blender_mesh[i].data.attributes["test"].data] usd_pos_data = [self.round_vector(d) for d in usd_mesh[i].GetPointsAttr().Get(frame)] usd_vel_data = [self.round_vector(d) for d in usd_mesh[i].GetVelocitiesAttr().Get(frame)] usd_test_data = [round(d, 5) for d in UsdGeom.PrimvarsAPI(usd_mesh[i]).GetPrimvar("test").Get(frame)] self.assertEqual( blender_pos_data, usd_pos_data, f"Frame {frame}: {blender_mesh[i].name} positions do not match") self.assertEqual( blender_vel_data, usd_vel_data, f"Frame {frame}: {blender_mesh[i].name} velocities do not match") self.assertEqual( blender_test_data, usd_test_data, f"Frame {frame}: {blender_mesh[i].name} test attributes do not match") # # Validate Point Cloud data # blender_pointclouds = [ bpy.data.objects["PointCloud"], bpy.data.objects["PointCloud.001"], bpy.data.objects["PointCloud.002"], bpy.data.objects["PointCloud.003"]] usd_points = [UsdGeom.Points(stage.GetPrimAtPath("/root/pointcloud1/PointCloud")), UsdGeom.Points(stage.GetPrimAtPath("/root/pointcloud2/PointCloud")), UsdGeom.Points(stage.GetPrimAtPath("/root/pointcloud3/PointCloud")), UsdGeom.Points(stage.GetPrimAtPath("/root/pointcloud4/PointCloud"))] pointclouds_num = len(blender_pointclouds) # Workaround: GeometrySet processing loses the data-block name on export. This is why the # .001 etc. names are being used above. Since we need the order of Blender objects to match # the order of USD prims, sort by the Y location to make them match in our test setup. blender_pointclouds.sort(key=lambda ob: ob.location.y) # A MeshSequenceCache modifier should be present on every imported object for i in range(0, pointclouds_num): self.assertTrue(len(blender_pointclouds[i].modifiers) == 1 and blender_pointclouds[i].modifiers[0].type == 'MESH_SEQUENCE_CACHE', f"{blender_pointclouds[i].name} has incorrect modifiers") # Compare Blender and USD data against each other for every frame for frame in range(1, 16): bpy.context.scene.frame_set(frame) depsgraph = bpy.context.evaluated_depsgraph_get() for i in range(0, mesh_num): blender_pointclouds[i] = blender_pointclouds[i].evaluated_get(depsgraph) # Check positions, velocity, radius, and test data for i in range(0, mesh_num): blender_pos_data = [self.round_vector(d.vector) for d in blender_pointclouds[i].data.attributes["position"].data] blender_vel_data = [self.round_vector(d.vector) for d in blender_pointclouds[i].data.attributes["velocity"].data] blender_radius_data = [round(d.value, 5) for d in blender_pointclouds[i].data.attributes["radius"].data] blender_test_data = [round(d.value, 5) for d in blender_pointclouds[i].data.attributes["test"].data] usd_pos_data = [self.round_vector(d) for d in usd_points[i].GetPointsAttr().Get(frame)] usd_vel_data = [self.round_vector(d) for d in usd_points[i].GetVelocitiesAttr().Get(frame)] usd_radius_data = [round(d / 2, 5) for d in usd_points[i].GetWidthsAttr().Get(frame)] usd_test_data = [round(d, 5) for d in UsdGeom.PrimvarsAPI(usd_points[i]).GetPrimvar("test").Get(frame)] name = usd_points[i].GetPath().GetParentPath().name self.assertEqual( blender_pos_data, usd_pos_data, f"Frame {frame}: {name} positions do not match") self.assertEqual( blender_vel_data, usd_vel_data, f"Frame {frame}: {name} velocities do not match") self.assertEqual( blender_radius_data, usd_radius_data, f"Frame {frame}: {name} radii do not match") self.assertEqual( blender_test_data, usd_test_data, f"Frame {frame}: {name} test attributes do not match") # # Validate Curves data # blender_curves = [ bpy.data.objects["Curves"], bpy.data.objects["Curves.001"], bpy.data.objects["Curves.002"], bpy.data.objects["Curves.003"]] usd_curves = [UsdGeom.BasisCurves(stage.GetPrimAtPath("/root/curves_plane1/curves1/Curves")), UsdGeom.BasisCurves(stage.GetPrimAtPath("/root/curves_plane2/curves2/Curves")), UsdGeom.BasisCurves(stage.GetPrimAtPath("/root/curves_plane3/curves3/Curves")), UsdGeom.BasisCurves(stage.GetPrimAtPath("/root/curves_plane4/curves4/Curves"))] curves_num = len(blender_curves) # Workaround: GeometrySet processing loses the data-block name on export. This is why the # .001 etc. names are being used above. Since we need the order of Blender objects to match # the order of USD prims, sort by the Y location to make them match in our test setup. blender_curves.sort(key=lambda ob: ob.parent.location.y) # A MeshSequenceCache modifier should be present on every imported object for i in range(0, curves_num): self.assertTrue(len(blender_curves[i].modifiers) == 1 and blender_curves[i].modifiers[0].type == 'MESH_SEQUENCE_CACHE', f"{blender_curves[i].name} has incorrect modifiers") # Compare Blender and USD data against each other for every frame for frame in range(1, 16): bpy.context.scene.frame_set(frame) depsgraph = bpy.context.evaluated_depsgraph_get() for i in range(0, mesh_num): blender_curves[i] = blender_curves[i].evaluated_get(depsgraph) # Check positions, velocity, radius, and test data for i in range(0, mesh_num): blender_pos_data = [self.round_vector(d.vector) for d in blender_curves[i].data.attributes["position"].data] blender_vel_data = [self.round_vector(d.vector) for d in blender_curves[i].data.attributes["velocity"].data] blender_radius_data = [round(d.value, 5) for d in blender_curves[i].data.attributes["radius"].data] blender_test_data = [round(d.value, 5) for d in blender_curves[i].data.attributes["test"].data] usd_pos_data = [self.round_vector(d) for d in usd_curves[i].GetPointsAttr().Get(frame)] usd_vel_data = [self.round_vector(d) for d in usd_curves[i].GetVelocitiesAttr().Get(frame)] usd_radius_data = [round(d / 2, 5) for d in usd_curves[i].GetWidthsAttr().Get(frame)] usd_test_data = [round(d, 5) for d in UsdGeom.PrimvarsAPI(usd_curves[i]).GetPrimvar("test").Get(frame)] name = usd_curves[i].GetPath().GetParentPath().name self.assertEqual( blender_pos_data, usd_pos_data, f"Frame {frame}: {name} positions do not match") self.assertEqual( blender_vel_data, usd_vel_data, f"Frame {frame}: {name} velocities do not match") self.assertEqual( blender_radius_data, usd_radius_data, f"Frame {frame}: {name} radii do not match") self.assertEqual( blender_test_data, usd_test_data, f"Frame {frame}: {name} test attributes do not match") def test_import_shapes(self): """Test importing USD Shape prims with time-varying attributes.""" infile = str(self.testdir / "usd_shapes_test.usda") res = bpy.ops.wm.usd_import(filepath=infile) self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {infile}") # Ensure we find the expected number of mesh objects blender_objects = [ob for ob in bpy.data.objects if ob.type == 'MESH'] self.assertEqual( 9, len(blender_objects), f"Test scene {infile} should have 9 mesh objects; found {len(blender_objects)}") # A MeshSequenceCache modifier should be present on every imported object for ob in blender_objects: self.assertTrue(len(ob.modifiers) == 1 and ob.modifiers[0].type == 'MESH_SEQUENCE_CACHE', f"{ob.name} has incorrect modifiers") def test_import_collection_creation(self): """Test that the 'create_collection' option functions correctly.""" # Any USD file will do infile = str(self.testdir / "usd_shapes_test.usda") # Import the file more than once to ensure the auto generated Collection name is unique # and no naming conflicts occur res = bpy.ops.wm.usd_import(filepath=infile, create_collection=True) self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {infile}") res = bpy.ops.wm.usd_import(filepath=infile, create_collection=True) self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {infile}") # Validate the correct user count for each Collection and ensure the objects were # placed inside each one. self.assertEqual(len(bpy.data.collections), 2) self.assertEqual(bpy.data.collections["Usd Shapes Test"].users, 1) self.assertEqual(bpy.data.collections["Usd Shapes Test.001"].users, 1) self.assertEqual(len(bpy.data.collections["Usd Shapes Test"].all_objects), 10) self.assertEqual(len(bpy.data.collections["Usd Shapes Test.001"].all_objects), 10) def test_import_id_props(self): """Test importing object and data IDProperties.""" # Create our set of ID's with all relevant IDProperty types/values that we support bpy.ops.object.empty_add() bpy.ops.object.light_add() bpy.ops.object.camera_add() bpy.ops.mesh.primitive_plane_add() ids = [ob if ob.type == 'EMPTY' else ob.data for ob in bpy.data.objects] properties = [ True, "string", 1, 2.0, [1, 2], [1, 2, 3], [1, 2, 3, 4], [1.0, 2.0], [1.0, 2.0, 3.0], [1.0, 2.0, 3.0, 4.0] ] for id in ids: for i, p in enumerate(properties): prop_name = "prop" + str(i) id[prop_name] = p # Export out this scene twice so we can test both the default "userProperties" namespace as # well as a custom namespace test_path1 = self.tempdir / "temp_idprops_userProperties_test.usda" res = bpy.ops.wm.usd_export(filepath=str(test_path1), evaluation_mode="RENDER") self.assertEqual({'FINISHED'}, res, f"Unable to export to {test_path1}") custom_namespace = "customns" test_path2 = self.tempdir / "temp_idprops_customns_test.usda" res = bpy.ops.wm.usd_export( filepath=str(test_path2), custom_properties_namespace=custom_namespace, evaluation_mode="RENDER") self.assertEqual({'FINISHED'}, res, f"Unable to export to {test_path2}") # Also write out another file using attribute types not natively writable by Blender test_path3 = self.tempdir / "temp_idprops_extended_test.usda" stage = Usd.Stage.CreateNew(str(test_path3)) xform = UsdGeom.Xform.Define(stage, '/empty') xform.GetPrim().CreateAttribute("prop0", Sdf.ValueTypeNames.Half).Set(0.5) xform.GetPrim().CreateAttribute("prop1", Sdf.ValueTypeNames.Float).Set(1.5) xform.GetPrim().CreateAttribute("prop2", Sdf.ValueTypeNames.Token).Set("tokenstring") xform.GetPrim().CreateAttribute("prop3", Sdf.ValueTypeNames.Asset).Set("assetstring") xform.GetPrim().CreateAttribute("prop4", Sdf.ValueTypeNames.Half2).Set(Gf.Vec2h(0, 1)) xform.GetPrim().CreateAttribute("prop5", Sdf.ValueTypeNames.Half3).Set(Gf.Vec3h(0, 1, 2)) xform.GetPrim().CreateAttribute("prop6", Sdf.ValueTypeNames.Half4).Set(Gf.Vec4h(0, 1, 2, 3)) xform.GetPrim().CreateAttribute("prop7", Sdf.ValueTypeNames.Float2).Set(Gf.Vec2f(0, 1)) xform.GetPrim().CreateAttribute("prop8", Sdf.ValueTypeNames.Float3).Set(Gf.Vec3f(0, 1, 2)) xform.GetPrim().CreateAttribute("prop9", Sdf.ValueTypeNames.Float4).Set(Gf.Vec4f(0, 1, 2, 3)) stage.GetRootLayer().Save() # Helper functions to check IDProperty validity import idprop def assert_all_props_present(properties, ns): ids = [ob if ob.type == 'EMPTY' else ob.data for ob in bpy.data.objects] for id in ids: for i, p in enumerate(properties): prop_name = (ns + ":" if ns != "" else "") + "prop" + str(i) prop = id[prop_name] value = prop.to_list() if type(prop) is idprop.types.IDPropertyArray else prop self.assertEqual(p, value, f"Property {prop_name} is incorrect") def assert_no_props_present(properties, ns): ids = [ob if ob.type == 'EMPTY' else ob.data for ob in bpy.data.objects] for id in ids: for i, p in enumerate(properties): prop_name = (ns + ":" if ns != "" else "") + "prop" + str(i) self.assertTrue(id.get(prop_name) is None, f"Property {prop_name} should not be present") # Reload the empty file and test the relevant combinations of namespaces and import modes infile = str(test_path1) bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "empty.blend")) res = bpy.ops.wm.usd_import(filepath=infile, attr_import_mode='USER') self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {infile}") self.assertEqual(len(bpy.data.objects), 4) assert_all_props_present(properties, "") infile = str(test_path1) bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "empty.blend")) res = bpy.ops.wm.usd_import(filepath=infile, attr_import_mode='NONE') self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {infile}") self.assertEqual(len(bpy.data.objects), 4) assert_no_props_present(properties, "") infile = str(test_path2) bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "empty.blend")) res = bpy.ops.wm.usd_import(filepath=infile, attr_import_mode='ALL') self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {infile}") self.assertEqual(len(bpy.data.objects), 4) assert_all_props_present(properties, custom_namespace) infile = str(test_path2) bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "empty.blend")) res = bpy.ops.wm.usd_import(filepath=infile, attr_import_mode='USER') self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {infile}") self.assertEqual(len(bpy.data.objects), 4) assert_no_props_present(properties, custom_namespace) infile = str(test_path3) bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "empty.blend")) res = bpy.ops.wm.usd_import(filepath=infile, attr_import_mode='ALL') self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {infile}") self.assertEqual(len(bpy.data.objects), 1) properties = [ 0.5, 1.5, "tokenstring", "assetstring", [0, 1], [0, 1, 2], [0, 1, 2, 3], [0, 1], [0, 1, 2], [0, 1, 2, 3] ] assert_all_props_present(properties, "") def test_import_usdz_image_processing(self): """Test importing of images from USDZ files in various ways.""" # USDZ processing needs the destination directory to exist self.tempdir.mkdir(parents=True, exist_ok=True) # Use the existing materials test file to create the USD file # for import. It is validated as part of the bl_usd_export test. bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "usd_materials_export.blend")) usdz1 = str(self.tempdir / "usd_materials_export.usdz") res = bpy.ops.wm.usd_export(filepath=usdz1, export_materials=True) self.assertEqual({'FINISHED'}, res, f"Unable to export to {usdz1}") usdz2 = str(self.tempdir / "usd_materials_export_downscaled.usdz") res = bpy.ops.wm.usd_export( filepath=usdz2, export_materials=True, usdz_downscale_size='CUSTOM', usdz_downscale_custom_size=128) self.assertEqual({'FINISHED'}, res, f"Unable to export to {usdz2}") def check_image(name, tiles_num, size, is_packed): self.assertTrue(name in bpy.data.images) image = bpy.data.images[name] self.assertEqual(len(image.tiles), tiles_num) self.assertEqual(image.packed_file is not None, is_packed) for tile in range(0, tiles_num): self.assertEqual(image.tiles[tile].size[0], size) self.assertEqual(image.tiles[tile].size[1], size) def check_materials(): self.assertTrue("Clip_With_LessThanInvert" in bpy.data.materials) self.assertTrue("Clip_With_Round" in bpy.data.materials) self.assertTrue("Material" in bpy.data.materials) self.assertTrue("NormalMap" in bpy.data.materials) self.assertTrue("NormalMap_Scale_Bias" in bpy.data.materials) self.assertTrue("Transforms" in bpy.data.materials) self.assertEqual(len(bpy.data.materials), 6) # Reload the empty file and import back in using IMPORT_PACK bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "empty.blend")) res = bpy.ops.wm.usd_import(filepath=usdz1, import_textures_mode='IMPORT_PACK') self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {usdz1}") self.assertEqual(len(bpy.data.images), 4) check_image("test_grid_.png", 2, 1024, True) check_image("test_normal.exr", 1, 128, True) check_image("test_normal_invertY.exr", 1, 128, True) check_image("color_121212.hdr", 1, 4, True) check_materials() # Reload the empty file and import back in using IMPORT_COPY bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "empty.blend")) res = bpy.ops.wm.usd_import( filepath=usdz2, import_textures_mode='IMPORT_COPY', import_textures_dir=str( self.tempdir)) self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {usdz2}") self.assertEqual(len(bpy.data.images), 4) check_image("test_grid_.png", 2, 128, False) check_image("test_normal.exr", 1, 128, False) check_image("test_normal_invertY.exr", 1, 128, False) check_image("color_121212.hdr", 1, 4, False) check_materials() def test_get_prim_map_parent_xform_not_merged(self): bpy.utils.register_class(GetPrimMapUsdImportHook) bpy.ops.wm.usd_import(filepath=str(self.testdir / "usd_name_property_template.usda"), merge_parent_xform=False) prim_map = GetPrimMapUsdImportHook.prim_map bpy.utils.unregister_class(GetPrimMapUsdImportHook) expected_prim_map = { Sdf.Path('/Cube'): [bpy.data.objects["Cube.002"], bpy.data.meshes["Cube.002"]], Sdf.Path('/XformThenCube'): [bpy.data.objects["XformThenCube"]], Sdf.Path('/XformThenCube/Cube'): [bpy.data.objects["Cube"], bpy.data.meshes["Cube"]], Sdf.Path('/XformThenXformCube'): [bpy.data.objects["XformThenXformCube"]], Sdf.Path('/XformThenXformCube/XformIntermediate'): [bpy.data.objects["XformIntermediate"]], Sdf.Path('/XformThenXformCube/XformIntermediate/Cube'): [bpy.data.objects["Cube.001"], bpy.data.meshes["Cube.001"]], Sdf.Path('/Material'): [bpy.data.materials["Material"]], } self.assertDictEqual(prim_map, expected_prim_map) def test_get_prim_map_parent_xform_merged(self): bpy.utils.register_class(GetPrimMapUsdImportHook) bpy.ops.wm.usd_import(filepath=str(self.testdir / "usd_name_property_template.usda"), merge_parent_xform=True) prim_map = GetPrimMapUsdImportHook.prim_map bpy.utils.unregister_class(GetPrimMapUsdImportHook) expected_prim_map = { Sdf.Path('/Cube'): [bpy.data.objects["Cube.002"], bpy.data.meshes["Cube.002"]], Sdf.Path('/XformThenCube'): [bpy.data.objects["Cube"]], Sdf.Path('/XformThenCube/Cube'): [bpy.data.meshes["Cube"]], Sdf.Path('/XformThenXformCube'): [bpy.data.objects["XformThenXformCube"]], Sdf.Path('/XformThenXformCube/XformIntermediate'): [bpy.data.objects["Cube.001"]], Sdf.Path('/XformThenXformCube/XformIntermediate/Cube'): [bpy.data.meshes["Cube.001"]], Sdf.Path('/Material'): [bpy.data.materials["Material"]], } self.assertDictEqual(prim_map, expected_prim_map) def test_import_unit_scale(self): """Test importing a USD with 0.01 meters per unit.""" infile = str(self.testdir / "usd_curve_bezier_all.usda") res = bpy.ops.wm.usd_import(filepath=infile, apply_unit_conversion_scale=True) self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {infile}") # Ensure the root object was scaled by 0.01. root = bpy.data.objects["root"] self.assertEqual(self.round_vector(root.scale), [0.01, 0.01, 0.01]) # Reimport with unit conversion scale off. bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "empty.blend")) infile = str(self.testdir / "usd_curve_bezier_all.usda") res = bpy.ops.wm.usd_import(filepath=infile, apply_unit_conversion_scale=False) self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {infile}") # Ensure the root object has default scale 1.0. root = bpy.data.objects["root"] self.assertEqual(self.round_vector(root.scale), [1.0, 1.0, 1.0]) def test_import_native_instancing(self): """Test importing USD files with scene instancing.""" # Use the existing instancing test file to create the USD file # for import. It is validated as part of the bl_usd_export test. bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "nested_instancing_test.blend")) testfile = str(self.tempdir / "usd_export_nested_instancing_true.usda") res = bpy.ops.wm.usd_export(filepath=testfile, use_instancing=True) self.assertEqual({'FINISHED'}, res, f"Unable to export to {testfile}") # Reload the empty file and import back in bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "empty.blend")) res = bpy.ops.wm.usd_import(filepath=testfile) self.assertEqual({'FINISHED'}, res, f"Unable to import USD file {testfile}") # If instancing is working there should only be 1 real mesh and 1 real point cloud self.assertEqual(len(bpy.data.meshes), 1) self.assertEqual(len(bpy.data.pointclouds), 1) real_names = [bpy.data.meshes[0].name, bpy.data.pointclouds[0].name] # There should be 6 instances found for the above real objects (not counting empties etc.) instance_count = 0 depsgraph = bpy.context.evaluated_depsgraph_get() for object_instance in depsgraph.object_instances: if object_instance.is_instance and object_instance.object.name in real_names: instance_count += 1 self.assertEqual(instance_count, 6, "Unexpected number of instances found") def test_material_import_usd_hook(self): """Test importing color from an mtlx shader.""" bpy.utils.register_class(ImportMtlxColorUSDHook) bpy.ops.wm.usd_import(filepath=str(self.testdir / "usd_simple_mtlx.usda")) bpy.utils.unregister_class(ImportMtlxColorUSDHook) # Check that the correct color was read. imported_color = ImportMtlxColorUSDHook.imported_color self.assertEqual(imported_color, [0, 1, 0, 1], "Wrong mtlx shader color imported") # Check that a Principled BSDF shader with the expected Base Color input. # was created. mtl = bpy.data.materials["Material"] self.assertTrue(mtl.use_nodes) bsdf = mtl.node_tree.nodes.get("Principled BSDF") self.assertIsNotNone(bsdf) base_color_input = bsdf.inputs['Base Color'] self.assertEqual(self.round_vector(base_color_input.default_value), [0, 1, 0, 1]) def test_usd_hook_import_texture(self): """ Test importing a texture from a USDZ archive, using two different texture import modes. """ bpy.utils.register_class(ImportMtlxTextureUSDHook) bpy.ops.wm.usd_import(filepath=str(self.testdir / "usd_simple_mtlx_texture.usdz"), import_textures_mode='IMPORT_COPY', import_textures_dir=str(self.tempdir / "textures")) # The resolved path should be a package-relative path for the USDZ, in this case # self.testdir / "usd_simple_mtlx_texture.usdz[textures/test_single.png]" resolved_path = ImportMtlxTextureUSDHook.resolved_path self.assertTrue(Ar.IsPackageRelativePath(resolved_path), "Resolved path is not relative to the USDZ") path_inner = Ar.SplitPackageRelativePathInner(resolved_path) self.assertEqual(path_inner[1], "textures/test_single.png", "Resolved path does not have the expected format") # Confirm that file was copied from the USDZ archive to the textures # directory. import_path = ImportMtlxTextureUSDHook.result[0] self.assertTrue(pathlib.Path(import_path).exists(), "Imported texture does not exist") # Path should not be temporary is_temporary = ImportMtlxTextureUSDHook.result[1] self.assertFalse(is_temporary, "Imported texture should not be temporary") # Repeat the test with texture packing enabled. bpy.ops.wm.usd_import(filepath=str(self.testdir / "usd_simple_mtlx_texture.usdz"), import_textures_mode='IMPORT_PACK', import_textures_dir="") # Confirm that the copied file exists. import_path = ImportMtlxTextureUSDHook.result[0] self.assertTrue(pathlib.Path(import_path).exists(), "Imported texture does not exist") # Path should be temporary is_temporary = ImportMtlxTextureUSDHook.result[1] self.assertTrue(is_temporary, "Imported texture should be temporary") bpy.utils.unregister_class(ImportMtlxTextureUSDHook) class USDImportComparisonTest(unittest.TestCase): @classmethod def setUpClass(cls): cls.testdir = args.testdir cls.output_dir = args.outdir def test_import_usd(self): comparisondir = self.testdir.joinpath("compare") input_files = sorted(pathlib.Path(comparisondir).glob("*.usd*")) self.passed_tests = [] self.failed_tests = [] self.updated_tests = [] from modules import io_report report = io_report.Report("USD Import", self.output_dir, comparisondir, comparisondir.joinpath("reference")) for input_file in input_files: with self.subTest(pathlib.Path(input_file).stem): bpy.ops.wm.open_mainfile(filepath=str(self.testdir / "empty.blend")) ok = report.import_and_check( input_file, lambda filepath, params: bpy.ops.wm.usd_import( filepath=str(input_file), import_subdiv=True, **params)) if not ok: self.fail(f"{input_file.stem} import result does not match expectations") report.finish("io_usd_import") class GetPrimMapUsdImportHook(bpy.types.USDHook): bl_idname = "get_prim_map_usd_import_hook" bl_label = "Get Prim Map Usd Import Hook" prim_map = None @staticmethod def on_import(context): GetPrimMapUsdImportHook.prim_map = context.get_prim_map() class ImportMtlxColorUSDHook(bpy.types.USDHook): """ Simple test for importing an mtxl shader from the usd_simple_mtlx.usda test file. """ bl_idname = "import_mtlx_color_usd_hook" bl_label = "Import Mtlx Color USD Hook" imported_color = None @staticmethod def material_import_poll(import_context, usd_material): # We can import the material if it has an 'mtlx' context. surf_output = usd_material.GetSurfaceOutput("mtlx") return bool(surf_output) @staticmethod def on_material_import(import_context, bl_material, usd_material): # Get base_color from connected surface shader. surf_output = usd_material.GetSurfaceOutput("mtlx") assert surf_output source = surf_output.GetConnectedSource() assert source shader = UsdShade.Shader(source[0]) assert shader color_attr = shader.GetInput("base_color") assert color_attr # Get the authored default color. color = color_attr.Get() # Add a Principled BSDF shader and set its 'Base Color' input to # the color we read from mtlx. bl_material.use_nodes = True node_tree = bl_material.node_tree nodes = node_tree.nodes bsdf = nodes.get("Principled BSDF") assert bsdf color4 = [color[0], color[1], color[2], 1] ImportMtlxColorUSDHook.imported_color = color4 bsdf.inputs['Base Color'].default_value = color4 return True class ImportMtlxTextureUSDHook(bpy.types.USDHook): """ Simple test for importing a texture file from the usd_simple_mtlx_texture.usdz archive test file. """ bl_idname = "import_mtlx_texture_usd_hook" bl_label = "Import Mtlx Texture USD Hook" resolved_path = None result = None @staticmethod def material_import_poll(import_context, usd_material): # We can import the material if it has an 'mtlx' context. surf_output = usd_material.GetSurfaceOutput("mtlx") return bool(surf_output) @staticmethod def on_material_import(import_context, bl_material, usd_material): # For the test, we get the texture file input of a shader known # to exist in the usd_simple_mtlx_texture.usdz archive. surf_output = usd_material.GetSurfaceOutput("mtlx") assert surf_output stage = import_context.get_stage() assert stage prim = stage.GetPrimAtPath("/root/_materials/Material/NodeGraphs/Image_Texture_Color") assert prim tex_node = UsdShade.Shader(prim) assert tex_node file_attr = tex_node.GetInput("file") assert file_attr file = file_attr.Get() # Record the file's resolved path, which should be a package-relative # path, e.g., # c:/foo/bar/usd_simple_mtlx_texture.usdz[textures/test_single.png resolved_path = file.resolvedPath ImportMtlxTextureUSDHook.resolved_path = resolved_path result = import_context.import_texture(resolved_path) # Record the returned result tuple. The first element of the tuple # is the texture path and the second is a flag indicating whether the # returned path references a temporary file. ImportMtlxTextureUSDHook.result = result return True def main(): global args import argparse if '--' in sys.argv: argv = [sys.argv[0]] + sys.argv[sys.argv.index('--') + 1:] else: argv = sys.argv parser = argparse.ArgumentParser() parser.add_argument('--testdir', required=True, type=pathlib.Path) parser.add_argument('--outdir', required=True, type=pathlib.Path) args, remaining = parser.parse_known_args(argv) unittest.main(argv=remaining, verbosity=0) if __name__ == "__main__": main()