nodejs/doc/api/net.md

# Net

<!--introduced_in=v0.10.0-->

<!--lint disable maximum-line-length-->

> Stability: 2 - Stable

<!-- source_link=lib/net.js -->

The `node:net` module provides an asynchronous network API for creating stream-based
TCP or [IPC][] servers ([`net.createServer()`][]) and clients
([`net.createConnection()`][]).

It can be accessed using:

```js
const net = require('node:net');
```

## IPC support

The `node:net` module supports IPC with named pipes on Windows, and Unix domain
sockets on other operating systems.

### Identifying paths for IPC connections

[`net.connect()`][], [`net.createConnection()`][], [`server.listen()`][], and
[`socket.connect()`][] take a `path` parameter to identify IPC endpoints.

On Unix, the local domain is also known as the Unix domain. The path is a
file system pathname. It gets truncated to an OS-dependent length of
`sizeof(sockaddr_un.sun_path) - 1`. Typical values are 107 bytes on Linux and
103 bytes on macOS. If a Node.js API abstraction creates the Unix domain socket,
it will unlink the Unix domain socket as well. For example,
[`net.createServer()`][] may create a Unix domain socket and
[`server.close()`][] will unlink it. But if a user creates the Unix domain
socket outside of these abstractions, the user will need to remove it. The same
applies when a Node.js API creates a Unix domain socket but the program then
crashes. In short, a Unix domain socket will be visible in the file system and
will persist until unlinked.

On Windows, the local domain is implemented using a named pipe. The path _must_
refer to an entry in `\\?\pipe\` or `\\.\pipe\`. Any characters are permitted,
but the latter may do some processing of pipe names, such as resolving `..`
sequences. Despite how it might look, the pipe namespace is flat. Pipes will
_not persist_. They are removed when the last reference to them is closed.
Unlike Unix domain sockets, Windows will close and remove the pipe when the
owning process exits.

JavaScript string escaping requires paths to be specified with extra backslash
escaping such as:

```js
net.createServer().listen(
  path.join('\\\\?\\pipe', process.cwd(), 'myctl'));
```

## Class: `net.BlockList`

<!-- YAML
added:
  - v15.0.0
  - v14.18.0
-->

The `BlockList` object can be used with some network APIs to specify rules for
disabling inbound or outbound access to specific IP addresses, IP ranges, or
IP subnets.

### `blockList.addAddress(address[, type])`

<!-- YAML
added:
  - v15.0.0
  - v14.18.0
-->

* `address` {string|net.SocketAddress} An IPv4 or IPv6 address.
* `type` {string} Either `'ipv4'` or `'ipv6'`. **Default:** `'ipv4'`.

Adds a rule to block the given IP address.

### `blockList.addRange(start, end[, type])`

<!-- YAML
added:
  - v15.0.0
  - v14.18.0
-->

* `start` {string|net.SocketAddress} The starting IPv4 or IPv6 address in the
  range.
* `end` {string|net.SocketAddress} The ending IPv4 or IPv6 address in the range.
* `type` {string} Either `'ipv4'` or `'ipv6'`. **Default:** `'ipv4'`.

Adds a rule to block a range of IP addresses from `start` (inclusive) to
`end` (inclusive).

### `blockList.addSubnet(net, prefix[, type])`

<!-- YAML
added:
  - v15.0.0
  - v14.18.0
-->

* `net` {string|net.SocketAddress} The network IPv4 or IPv6 address.
* `prefix` {number} The number of CIDR prefix bits. For IPv4, this
  must be a value between `0` and `32`. For IPv6, this must be between
  `0` and `128`.
* `type` {string} Either `'ipv4'` or `'ipv6'`. **Default:** `'ipv4'`.

Adds a rule to block a range of IP addresses specified as a subnet mask.

### `blockList.check(address[, type])`

<!-- YAML
added:
  - v15.0.0
  - v14.18.0
-->

* `address` {string|net.SocketAddress} The IP address to check
* `type` {string} Either `'ipv4'` or `'ipv6'`. **Default:** `'ipv4'`.
* Returns: {boolean}

Returns `true` if the given IP address matches any of the rules added to the
`BlockList`.

```js
const blockList = new net.BlockList();
blockList.addAddress('123.123.123.123');
blockList.addRange('10.0.0.1', '10.0.0.10');
blockList.addSubnet('8592:757c:efae:4e45::', 64, 'ipv6');

console.log(blockList.check('123.123.123.123'));  // Prints: true
console.log(blockList.check('10.0.0.3'));  // Prints: true
console.log(blockList.check('222.111.111.222'));  // Prints: false

// IPv6 notation for IPv4 addresses works:
console.log(blockList.check('::ffff:7b7b:7b7b', 'ipv6')); // Prints: true
console.log(blockList.check('::ffff:123.123.123.123', 'ipv6')); // Prints: true
```

### `blockList.rules`

<!-- YAML
added:
  - v15.0.0
  - v14.18.0
-->

* Type: {string\[]}

The list of rules added to the blocklist.

## Class: `net.SocketAddress`

<!-- YAML
added:
  - v15.14.0
  - v14.18.0
-->

### `new net.SocketAddress([options])`

<!-- YAML
added:
  - v15.14.0
  - v14.18.0
-->

* `options` {Object}
  * `address` {string} The network address as either an IPv4 or IPv6 string.
    **Default**: `'127.0.0.1'` if `family` is `'ipv4'`; `'::'` if `family` is
    `'ipv6'`.
  * `family` {string} One of either `'ipv4'` or `'ipv6'`.
    **Default**: `'ipv4'`.
  * `flowlabel` {number} An IPv6 flow-label used only if `family` is `'ipv6'`.
  * `port` {number} An IP port.

### `socketaddress.address`

<!-- YAML
added:
  - v15.14.0
  - v14.18.0
-->

* Type {string}

### `socketaddress.family`

<!-- YAML
added:
  - v15.14.0
  - v14.18.0
-->

* Type {string} Either `'ipv4'` or `'ipv6'`.

### `socketaddress.flowlabel`

<!-- YAML
added:
  - v15.14.0
  - v14.18.0
-->

* Type {number}

### `socketaddress.port`

<!-- YAML
added:
  - v15.14.0
  - v14.18.0
-->

* Type {number}

## Class: `net.Server`

<!-- YAML
added: v0.1.90
-->

* Extends: {EventEmitter}

This class is used to create a TCP or [IPC][] server.

### `new net.Server([options][, connectionListener])`

* `options` {Object} See
  [`net.createServer([options][, connectionListener])`][`net.createServer()`].
* `connectionListener` {Function} Automatically set as a listener for the
  [`'connection'`][] event.
* Returns: {net.Server}

`net.Server` is an [`EventEmitter`][] with the following events:

### Event: `'close'`

<!-- YAML
added: v0.5.0
-->

Emitted when the server closes. If connections exist, this
event is not emitted until all connections are ended.

### Event: `'connection'`

<!-- YAML
added: v0.1.90
-->

* {net.Socket} The connection object

Emitted when a new connection is made. `socket` is an instance of
`net.Socket`.

### Event: `'error'`

<!-- YAML
added: v0.1.90
-->

* {Error}

Emitted when an error occurs. Unlike [`net.Socket`][], the [`'close'`][]
event will **not** be emitted directly following this event unless
[`server.close()`][] is manually called. See the example in discussion of
[`server.listen()`][].

### Event: `'listening'`

<!-- YAML
added: v0.1.90
-->

Emitted when the server has been bound after calling [`server.listen()`][].

### Event: `'drop'`

<!-- YAML
added:
  - v18.6.0
  - v16.17.0
-->

When the number of connections reaches the threshold of `server.maxConnections`,
the server will drop new connections and emit `'drop'` event instead. If it is a
TCP server, the argument is as follows, otherwise the argument is `undefined`.

* `data` {Object} The argument passed to event listener.
  * `localAddress` {string}  Local address.
  * `localPort` {number} Local port.
  * `localFamily` {string} Local family.
  * `remoteAddress` {string} Remote address.
  * `remotePort` {number} Remote port.
  * `remoteFamily` {string} Remote IP family. `'IPv4'` or `'IPv6'`.

### `server.address()`

<!-- YAML
added: v0.1.90
changes:
  - version: v18.4.0
    pr-url: https://github.com/nodejs/node/pull/43054
    description: The `family` property now returns a string instead of a number.
  - version: v18.0.0
    pr-url: https://github.com/nodejs/node/pull/41431
    description: The `family` property now returns a number instead of a string.
-->

* Returns: {Object|string|null}

Returns the bound `address`, the address `family` name, and `port` of the server
as reported by the operating system if listening on an IP socket
(useful to find which port was assigned when getting an OS-assigned address):
`{ port: 12346, family: 'IPv4', address: '127.0.0.1' }`.

For a server listening on a pipe or Unix domain socket, the name is returned
as a string.

```js
const server = net.createServer((socket) => {
  socket.end('goodbye\n');
}).on('error', (err) => {
  // Handle errors here.
  throw err;
});

// Grab an arbitrary unused port.
server.listen(() => {
  console.log('opened server on', server.address());
});
```

`server.address()` returns `null` before the `'listening'` event has been
emitted or after calling `server.close()`.

### `server.close([callback])`

<!-- YAML
added: v0.1.90
-->

* `callback` {Function} Called when the server is closed.
* Returns: {net.Server}

Stops the server from accepting new connections and keeps existing
connections. This function is asynchronous, the server is finally closed
when all connections are ended and the server emits a [`'close'`][] event.
The optional `callback` will be called once the `'close'` event occurs. Unlike
that event, it will be called with an `Error` as its only argument if the server
was not open when it was closed.

### `server.getConnections(callback)`

<!-- YAML
added: v0.9.7
-->

* `callback` {Function}
* Returns: {net.Server}

Asynchronously get the number of concurrent connections on the server. Works
when sockets were sent to forks.

Callback should take two arguments `err` and `count`.

### `server.listen()`

Start a server listening for connections. A `net.Server` can be a TCP or
an [IPC][] server depending on what it listens to.

Possible signatures:

* [`server.listen(handle[, backlog][, callback])`][`server.listen(handle)`]
* [`server.listen(options[, callback])`][`server.listen(options)`]
* [`server.listen(path[, backlog][, callback])`][`server.listen(path)`]
  for [IPC][] servers
* [`server.listen([port[, host[, backlog]]][, callback])`][`server.listen(port)`]
  for TCP servers

This function is asynchronous. When the server starts listening, the
[`'listening'`][] event will be emitted. The last parameter `callback`
will be added as a listener for the [`'listening'`][] event.

All `listen()` methods can take a `backlog` parameter to specify the maximum
length of the queue of pending connections. The actual length will be determined
by the OS through sysctl settings such as `tcp_max_syn_backlog` and `somaxconn`
on Linux. The default value of this parameter is 511 (not 512).

All [`net.Socket`][] are set to `SO_REUSEADDR` (see [`socket(7)`][] for
details).

The `server.listen()` method can be called again if and only if there was an
error during the first `server.listen()` call or `server.close()` has been
called. Otherwise, an `ERR_SERVER_ALREADY_LISTEN` error will be thrown.

One of the most common errors raised when listening is `EADDRINUSE`.
This happens when another server is already listening on the requested
`port`/`path`/`handle`. One way to handle this would be to retry
after a certain amount of time:

```js
server.on('error', (e) => {
  if (e.code === 'EADDRINUSE') {
    console.error('Address in use, retrying...');
    setTimeout(() => {
      server.close();
      server.listen(PORT, HOST);
    }, 1000);
  }
});
```

#### `server.listen(handle[, backlog][, callback])`

<!-- YAML
added: v0.5.10
-->

* `handle` {Object}
* `backlog` {number} Common parameter of [`server.listen()`][] functions
* `callback` {Function}
* Returns: {net.Server}

Start a server listening for connections on a given `handle` that has
already been bound to a port, a Unix domain socket, or a Windows named pipe.

The `handle` object can be either a server, a socket (anything with an
underlying `_handle` member), or an object with an `fd` member that is a
valid file descriptor.

Listening on a file descriptor is not supported on Windows.

#### `server.listen(options[, callback])`

<!-- YAML
added: v0.11.14
changes:
  - version: v15.6.0
    pr-url: https://github.com/nodejs/node/pull/36623
    description: AbortSignal support was added.
  - version: v11.4.0
    pr-url: https://github.com/nodejs/node/pull/23798
    description: The `ipv6Only` option is supported.
-->

* `options` {Object} Required. Supports the following properties:
  * `port` {number}
  * `host` {string}
  * `path` {string} Will be ignored if `port` is specified. See
    [Identifying paths for IPC connections][].
  * `backlog` {number} Common parameter of [`server.listen()`][]
    functions.
  * `exclusive` {boolean} **Default:** `false`
  * `readableAll` {boolean} For IPC servers makes the pipe readable
    for all users. **Default:** `false`.
  * `writableAll` {boolean} For IPC servers makes the pipe writable
    for all users. **Default:** `false`.
  * `ipv6Only` {boolean} For TCP servers, setting `ipv6Only` to `true` will
    disable dual-stack support, i.e., binding to host `::` won't make
    `0.0.0.0` be bound. **Default:** `false`.
  * `signal` {AbortSignal} An AbortSignal that may be used to close a listening server.
* `callback` {Function}
  functions.
* Returns: {net.Server}

If `port` is specified, it behaves the same as
[`server.listen([port[, host[, backlog]]][, callback])`][`server.listen(port)`].
Otherwise, if `path` is specified, it behaves the same as
[`server.listen(path[, backlog][, callback])`][`server.listen(path)`].
If none of them is specified, an error will be thrown.

If `exclusive` is `false` (default), then cluster workers will use the same
underlying handle, allowing connection handling duties to be shared. When
`exclusive` is `true`, the handle is not shared, and attempted port sharing
results in an error. An example which listens on an exclusive port is
shown below.

```js
server.listen({
  host: 'localhost',
  port: 80,
  exclusive: true,
});
```

When `exclusive` is `true` and the underlying handle is shared, it is
possible that several workers query a handle with different backlogs.
In this case, the first `backlog` passed to the master process will be used.

Starting an IPC server as root may cause the server path to be inaccessible for
unprivileged users. Using `readableAll` and `writableAll` will make the server
accessible for all users.

If the `signal` option is enabled, calling `.abort()` on the corresponding
`AbortController` is similar to calling `.close()` on the server:

```js
const controller = new AbortController();
server.listen({
  host: 'localhost',
  port: 80,
  signal: controller.signal,
});
// Later, when you want to close the server.
controller.abort();
```

#### `server.listen(path[, backlog][, callback])`

<!-- YAML
added: v0.1.90
-->

* `path` {string} Path the server should listen to. See
  [Identifying paths for IPC connections][].
* `backlog` {number} Common parameter of [`server.listen()`][] functions.
* `callback` {Function}.
* Returns: {net.Server}

Start an [IPC][] server listening for connections on the given `path`.

#### `server.listen([port[, host[, backlog]]][, callback])`

<!-- YAML
added: v0.1.90
-->

* `port` {number}
* `host` {string}
* `backlog` {number} Common parameter of [`server.listen()`][] functions.
* `callback` {Function}.
* Returns: {net.Server}

Start a TCP server listening for connections on the given `port` and `host`.

If `port` is omitted or is 0, the operating system will assign an arbitrary
unused port, which can be retrieved by using `server.address().port`
after the [`'listening'`][] event has been emitted.

If `host` is omitted, the server will accept connections on the
[unspecified IPv6 address][] (`::`) when IPv6 is available, or the
[unspecified IPv4 address][] (`0.0.0.0`) otherwise.

In most operating systems, listening to the [unspecified IPv6 address][] (`::`)
may cause the `net.Server` to also listen on the [unspecified IPv4 address][]
(`0.0.0.0`).

### `server.listening`

<!-- YAML
added: v5.7.0
-->

* {boolean} Indicates whether or not the server is listening for connections.

### `server.maxConnections`

<!-- YAML
added: v0.2.0
-->

* {integer}

Set this property to reject connections when the server's connection count gets
high.

It is not recommended to use this option once a socket has been sent to a child
with [`child_process.fork()`][].

### `server.ref()`

<!-- YAML
added: v0.9.1
-->

* Returns: {net.Server}

Opposite of `unref()`, calling `ref()` on a previously `unref`ed server will
_not_ let the program exit if it's the only server left (the default behavior).
If the server is `ref`ed calling `ref()` again will have no effect.

### `server.unref()`

<!-- YAML
added: v0.9.1
-->

* Returns: {net.Server}

Calling `unref()` on a server will allow the program to exit if this is the only
active server in the event system. If the server is already `unref`ed calling
`unref()` again will have no effect.

## Class: `net.Socket`

<!-- YAML
added: v0.3.4
-->

* Extends: {stream.Duplex}

This class is an abstraction of a TCP socket or a streaming [IPC][] endpoint
(uses named pipes on Windows, and Unix domain sockets otherwise). It is also
an [`EventEmitter`][].

A `net.Socket` can be created by the user and used directly to interact with
a server. For example, it is returned by [`net.createConnection()`][],
so the user can use it to talk to the server.

It can also be created by Node.js and passed to the user when a connection
is received. For example, it is passed to the listeners of a
[`'connection'`][] event emitted on a [`net.Server`][], so the user can use
it to interact with the client.

### `new net.Socket([options])`

<!-- YAML
added: v0.3.4
changes:
  - version: v15.14.0
    pr-url: https://github.com/nodejs/node/pull/37735
    description: AbortSignal support was added.
-->

* `options` {Object} Available options are:
  * `fd` {number} If specified, wrap around an existing socket with
    the given file descriptor, otherwise a new socket will be created.
  * `allowHalfOpen` {boolean} If set to `false`, then the socket will
    automatically end the writable side when the readable side ends. See
    [`net.createServer()`][] and the [`'end'`][] event for details. **Default:**
    `false`.
  * `readable` {boolean} Allow reads on the socket when an `fd` is passed,
    otherwise ignored. **Default:** `false`.
  * `writable` {boolean} Allow writes on the socket when an `fd` is passed,
    otherwise ignored. **Default:** `false`.
  * `signal` {AbortSignal} An Abort signal that may be used to destroy the
    socket.
* Returns: {net.Socket}

Creates a new socket object.

The newly created socket can be either a TCP socket or a streaming [IPC][]
endpoint, depending on what it [`connect()`][`socket.connect()`] to.

### Event: `'close'`

<!-- YAML
added: v0.1.90
-->

* `hadError` {boolean} `true` if the socket had a transmission error.

Emitted once the socket is fully closed. The argument `hadError` is a boolean
which says if the socket was closed due to a transmission error.

### Event: `'connect'`

<!-- YAML
added: v0.1.90
-->

Emitted when a socket connection is successfully established.
See [`net.createConnection()`][].

### Event: `'data'`

<!-- YAML
added: v0.1.90
-->

* {Buffer|string}

Emitted when data is received. The argument `data` will be a `Buffer` or
`String`. Encoding of data is set by [`socket.setEncoding()`][].

The data will be lost if there is no listener when a `Socket`
emits a `'data'` event.

### Event: `'drain'`

<!-- YAML
added: v0.1.90
-->

Emitted when the write buffer becomes empty. Can be used to throttle uploads.

See also: the return values of `socket.write()`.

### Event: `'end'`

<!-- YAML
added: v0.1.90
-->

Emitted when the other end of the socket signals the end of transmission, thus
ending the readable side of the socket.

By default (`allowHalfOpen` is `false`) the socket will send an end of
transmission packet back and destroy its file descriptor once it has written out
its pending write queue. However, if `allowHalfOpen` is set to `true`, the
socket will not automatically [`end()`][`socket.end()`] its writable side,
allowing the user to write arbitrary amounts of data. The user must call
[`end()`][`socket.end()`] explicitly to close the connection (i.e. sending a
FIN packet back).

### Event: `'error'`

<!-- YAML
added: v0.1.90
-->

* {Error}

Emitted when an error occurs. The `'close'` event will be called directly
following this event.

### Event: `'lookup'`

<!-- YAML
added: v0.11.3
changes:
  - version: v5.10.0
    pr-url: https://github.com/nodejs/node/pull/5598
    description: The `host` parameter is supported now.
-->

Emitted after resolving the host name but before connecting.
Not applicable to Unix sockets.

* `err` {Error|null} The error object. See [`dns.lookup()`][].
* `address` {string} The IP address.
* `family` {number|null} The address type. See [`dns.lookup()`][].
* `host` {string} The host name.

### Event: `'ready'`

<!-- YAML
added: v9.11.0
-->

Emitted when a socket is ready to be used.

Triggered immediately after `'connect'`.

### Event: `'timeout'`

<!-- YAML
added: v0.1.90
-->

Emitted if the socket times out from inactivity. This is only to notify that
the socket has been idle. The user must manually close the connection.

See also: [`socket.setTimeout()`][].

### `socket.address()`

<!-- YAML
added: v0.1.90
changes:
  - version: v18.4.0
    pr-url: https://github.com/nodejs/node/pull/43054
    description: The `family` property now returns a string instead of a number.
  - version: v18.0.0
    pr-url: https://github.com/nodejs/node/pull/41431
    description: The `family` property now returns a number instead of a string.
-->

* Returns: {Object}

Returns the bound `address`, the address `family` name and `port` of the
socket as reported by the operating system:
`{ port: 12346, family: 'IPv4', address: '127.0.0.1' }`

### `socket.autoSelectFamilyAttemptedAddresses`

<!-- YAML
added: v19.4.0
-->

* {string\[]}

This property is only present if the family autoselection algorithm is enabled in
[`socket.connect(options)`][] and it is an array of the addresses that have been attempted.

Each address is a string in the form of `$IP:$PORT`. If the connection was successful,
then the last address is the one that the socket is currently connected to.

### `socket.bufferSize`

<!-- YAML
added: v0.3.8
deprecated:
  - v14.6.0
-->

> Stability: 0 - Deprecated: Use [`writable.writableLength`][] instead.

* {integer}

This property shows the number of characters buffered for writing. The buffer
may contain strings whose length after encoding is not yet known. So this number
is only an approximation of the number of bytes in the buffer.

`net.Socket` has the property that `socket.write()` always works. This is to
help users get up and running quickly. The computer cannot always keep up
with the amount of data that is written to a socket. The network connection
simply might be too slow. Node.js will internally queue up the data written to a
socket and send it out over the wire when it is possible.

The consequence of this internal buffering is that memory may grow.
Users who experience large or growing `bufferSize` should attempt to
"throttle" the data flows in their program with
[`socket.pause()`][] and [`socket.resume()`][].

### `socket.bytesRead`

<!-- YAML
added: v0.5.3
-->

* {integer}

The amount of received bytes.

### `socket.bytesWritten`

<!-- YAML
added: v0.5.3
-->

* {integer}

The amount of bytes sent.

### `socket.connect()`

Initiate a connection on a given socket.

Possible signatures:

* [`socket.connect(options[, connectListener])`][`socket.connect(options)`]
* [`socket.connect(path[, connectListener])`][`socket.connect(path)`]
  for [IPC][] connections.
* [`socket.connect(port[, host][, connectListener])`][`socket.connect(port)`]
  for TCP connections.
* Returns: {net.Socket} The socket itself.

This function is asynchronous. When the connection is established, the
[`'connect'`][] event will be emitted. If there is a problem connecting,
instead of a [`'connect'`][] event, an [`'error'`][] event will be emitted with
the error passed to the [`'error'`][] listener.
The last parameter `connectListener`, if supplied, will be added as a listener
for the [`'connect'`][] event **once**.

This function should only be used for reconnecting a socket after
`'close'` has been emitted or otherwise it may lead to undefined
behavior.

#### `socket.connect(options[, connectListener])`

<!-- YAML
added: v0.1.90
changes:
  - version: v20.0.0
    pr-url: https://github.com/nodejs/node/pull/46790
    description: The default value for the autoSelectFamily option is now true.
                 The `--enable-network-family-autoselection` CLI flag has been renamed
                 to `--network-family-autoselection`. The old name is now an
                 alias but it is discouraged.
  - version: v19.4.0
    pr-url: https://github.com/nodejs/node/pull/45777
    description: The default value for autoSelectFamily option can be changed
                 at runtime using `setDefaultAutoSelectFamily` or via the
                 command line option `--enable-network-family-autoselection`.
  - version:
      - v19.3.0
      - v18.13.0
    pr-url: https://github.com/nodejs/node/pull/44731
    description: Added the `autoSelectFamily` option.
  - version:
    - v17.7.0
    - v16.15.0
    pr-url: https://github.com/nodejs/node/pull/41310
    description: The `noDelay`, `keepAlive`, and `keepAliveInitialDelay`
                 options are supported now.
  - version: v12.10.0
    pr-url: https://github.com/nodejs/node/pull/25436
    description: Added `onread` option.
  - version: v6.0.0
    pr-url: https://github.com/nodejs/node/pull/6021
    description: The `hints` option defaults to `0` in all cases now.
                 Previously, in the absence of the `family` option it would
                 default to `dns.ADDRCONFIG | dns.V4MAPPED`.
  - version: v5.11.0
    pr-url: https://github.com/nodejs/node/pull/6000
    description: The `hints` option is supported now.
-->

* `options` {Object}
* `connectListener` {Function} Common parameter of [`socket.connect()`][]
  methods. Will be added as a listener for the [`'connect'`][] event once.
* Returns: {net.Socket} The socket itself.

Initiate a connection on a given socket. Normally this method is not needed,
the socket should be created and opened with [`net.createConnection()`][]. Use
this only when implementing a custom Socket.

For TCP connections, available `options` are:

* `port` {number} Required. Port the socket should connect to.
* `host` {string} Host the socket should connect to. **Default:** `'localhost'`.
* `localAddress` {string} Local address the socket should connect from.
* `localPort` {number} Local port the socket should connect from.
* `family` {number}: Version of IP stack. Must be `4`, `6`, or `0`. The value
  `0` indicates that both IPv4 and IPv6 addresses are allowed. **Default:** `0`.
* `hints` {number} Optional [`dns.lookup()` hints][].
* `lookup` {Function} Custom lookup function. **Default:** [`dns.lookup()`][].
* `noDelay` {boolean} If set to `true`, it disables the use of Nagle's algorithm immediately
  after the socket is established. **Default:** `false`.
* `keepAlive` {boolean} If set to `true`, it enables keep-alive functionality on the socket
  immediately after the connection is established, similarly on what is done in
  [`socket.setKeepAlive([enable][, initialDelay])`][`socket.setKeepAlive(enable, initialDelay)`].
  **Default:** `false`.
* `keepAliveInitialDelay` {number} If set to a positive number, it sets the initial delay before
  the first keepalive probe is sent on an idle socket.**Default:** `0`.
* `autoSelectFamily` {boolean}: If set to `true`, it enables a family autodetection algorithm
  that loosely implements section 5 of [RFC 8305][].
  The `all` option passed to lookup is set to `true` and the sockets attempts to connect to all
  obtained IPv6 and IPv4 addresses, in sequence, until a connection is established.
  The first returned AAAA address is tried first, then the first returned A address,
  then the second returned AAAA address and so on.
  Each connection attempt is given the amount of time specified by the `autoSelectFamilyAttemptTimeout`
  option before timing out and trying the next address.
  Ignored if the `family` option is not `0` or if `localAddress` is set.
  Connection errors are not emitted if at least one connection succeeds.
  If all connections attempts fails, a single `AggregateError` with all failed attempts is emitted.
  **Default:** [`net.getDefaultAutoSelectFamily()`][]
* `autoSelectFamilyAttemptTimeout` {number}: The amount of time in milliseconds to wait
  for a connection attempt to finish before trying the next address when using the `autoSelectFamily` option.
  If set to a positive integer less than `10`, then the value `10` will be used instead.
  **Default:** [`net.getDefaultAutoSelectFamilyAttemptTimeout()`][]

For [IPC][] connections, available `options` are:

* `path` {string} Required. Path the client should connect to.
  See [Identifying paths for IPC connections][]. If provided, the TCP-specific
  options above are ignored.

For both types, available `options` include:

* `onread` {Object} If specified, incoming data is stored in a single `buffer`
  and passed to the supplied `callback` when data arrives on the socket.
  This will cause the streaming functionality to not provide any data.
  The socket will emit events like `'error'`, `'end'`, and `'close'`
  as usual. Methods like `pause()` and `resume()` will also behave as
  expected.
  * `buffer` {Buffer|Uint8Array|Function} Either a reusable chunk of memory to
    use for storing incoming data or a function that returns such.
  * `callback` {Function} This function is called for every chunk of incoming
    data. Two arguments are passed to it: the number of bytes written to
    `buffer` and a reference to `buffer`. Return `false` from this function to
    implicitly `pause()` the socket. This function will be executed in the
    global context.

Following is an example of a client using the `onread` option:

```js
const net = require('node:net');
net.connect({
  port: 80,
  onread: {
    // Reuses a 4KiB Buffer for every read from the socket.
    buffer: Buffer.alloc(4 * 1024),
    callback: function(nread, buf) {
      // Received data is available in `buf` from 0 to `nread`.
      console.log(buf.toString('utf8', 0, nread));
    },
  },
});
```

#### `socket.connect(path[, connectListener])`

* `path` {string} Path the client should connect to. See
  [Identifying paths for IPC connections][].
* `connectListener` {Function} Common parameter of [`socket.connect()`][]
  methods. Will be added as a listener for the [`'connect'`][] event once.
* Returns: {net.Socket} The socket itself.

Initiate an [IPC][] connection on the given socket.

Alias to
[`socket.connect(options[, connectListener])`][`socket.connect(options)`]
called with `{ path: path }` as `options`.

#### `socket.connect(port[, host][, connectListener])`

<!-- YAML
added: v0.1.90
-->

* `port` {number} Port the client should connect to.
* `host` {string} Host the client should connect to.
* `connectListener` {Function} Common parameter of [`socket.connect()`][]
  methods. Will be added as a listener for the [`'connect'`][] event once.
* Returns: {net.Socket} The socket itself.

Initiate a TCP connection on the given socket.

Alias to
[`socket.connect(options[, connectListener])`][`socket.connect(options)`]
called with `{port: port, host: host}` as `options`.

### `socket.connecting`

<!-- YAML
added: v6.1.0
-->

* {boolean}

If `true`,
[`socket.connect(options[, connectListener])`][`socket.connect(options)`] was
called and has not yet finished. It will stay `true` until the socket becomes
connected, then it is set to `false` and the `'connect'` event is emitted. Note
that the
[`socket.connect(options[, connectListener])`][`socket.connect(options)`]
callback is a listener for the `'connect'` event.

### `socket.destroy([error])`

<!-- YAML
added: v0.1.90
-->

* `error` {Object}
* Returns: {net.Socket}

Ensures that no more I/O activity happens on this socket.
Destroys the stream and closes the connection.

See [`writable.destroy()`][] for further details.

### `socket.destroyed`

* {boolean} Indicates if the connection is destroyed or not. Once a
  connection is destroyed no further data can be transferred using it.

See [`writable.destroyed`][] for further details.

### `socket.destroySoon()`

<!-- YAML
added: v0.3.4
-->

Destroys the socket after all data is written. If the `'finish'` event was
already emitted the socket is destroyed immediately. If the socket is still
writable it implicitly calls `socket.end()`.

### `socket.end([data[, encoding]][, callback])`

<!-- YAML
added: v0.1.90
-->

* `data` {string|Buffer|Uint8Array}
* `encoding` {string} Only used when data is `string`. **Default:** `'utf8'`.
* `callback` {Function} Optional callback for when the socket is finished.
* Returns: {net.Socket} The socket itself.

Half-closes the socket. i.e., it sends a FIN packet. It is possible the
server will still send some data.

See [`writable.end()`][] for further details.

### `socket.localAddress`

<!-- YAML
added: v0.9.6
-->

* {string}

The string representation of the local IP address the remote client is
connecting on. For example, in a server listening on `'0.0.0.0'`, if a client
connects on `'192.168.1.1'`, the value of `socket.localAddress` would be
`'192.168.1.1'`.

### `socket.localPort`

<!-- YAML
added: v0.9.6
-->

* {integer}

The numeric representation of the local port. For example, `80` or `21`.

### `socket.localFamily`

<!-- YAML
added:
  - v18.8.0
  - v16.18.0
-->

* {string}

The string representation of the local IP family. `'IPv4'` or `'IPv6'`.

### `socket.pause()`

* Returns: {net.Socket} The socket itself.

Pauses the reading of data. That is, [`'data'`][] events will not be emitted.
Useful to throttle back an upload.

### `socket.pending`

<!-- YAML
added:
 - v11.2.0
 - v10.16.0
-->

* {boolean}

This is `true` if the socket is not connected yet, either because `.connect()`
has not yet been called or because it is still in the process of connecting
(see [`socket.connecting`][]).

### `socket.ref()`

<!-- YAML
added: v0.9.1
-->

* Returns: {net.Socket} The socket itself.

Opposite of `unref()`, calling `ref()` on a previously `unref`ed socket will
_not_ let the program exit if it's the only socket left (the default behavior).
If the socket is `ref`ed calling `ref` again will have no effect.

### `socket.remoteAddress`

<!-- YAML
added: v0.5.10
-->

* {string}

The string representation of the remote IP address. For example,
`'74.125.127.100'` or `'2001:4860:a005::68'`. Value may be `undefined` if
the socket is destroyed (for example, if the client disconnected).

### `socket.remoteFamily`

<!-- YAML
added: v0.11.14
-->

* {string}

The string representation of the remote IP family. `'IPv4'` or `'IPv6'`.

### `socket.remotePort`

<!-- YAML
added: v0.5.10
-->

* {integer}

The numeric representation of the remote port. For example, `80` or `21`.

### `socket.resetAndDestroy()`

<!-- YAML
added:
  - v18.3.0
  - v16.17.0
-->

* Returns: {net.Socket}

Close the TCP connection by sending an RST packet and destroy the stream.
If this TCP socket is in connecting status, it will send an RST packet and destroy this TCP socket once it is connected.
Otherwise, it will call `socket.destroy` with an `ERR_SOCKET_CLOSED` Error.
If this is not a TCP socket (for example, a pipe), calling this method will immediately throw an `ERR_INVALID_HANDLE_TYPE` Error.

### `socket.resume()`

* Returns: {net.Socket} The socket itself.

Resumes reading after a call to [`socket.pause()`][].

### `socket.setEncoding([encoding])`

<!-- YAML
added: v0.1.90
-->

* `encoding` {string}
* Returns: {net.Socket} The socket itself.

Set the encoding for the socket as a [Readable Stream][]. See
[`readable.setEncoding()`][] for more information.

### `socket.setKeepAlive([enable][, initialDelay])`

<!-- YAML
added: v0.1.92
changes:
  - version:
    - v13.12.0
    - v12.17.0
    pr-url: https://github.com/nodejs/node/pull/32204
    description: New defaults for `TCP_KEEPCNT` and `TCP_KEEPINTVL` socket options were added.
-->

* `enable` {boolean} **Default:** `false`
* `initialDelay` {number} **Default:** `0`
* Returns: {net.Socket} The socket itself.

Enable/disable keep-alive functionality, and optionally set the initial
delay before the first keepalive probe is sent on an idle socket.

Set `initialDelay` (in milliseconds) to set the delay between the last
data packet received and the first keepalive probe. Setting `0` for
`initialDelay` will leave the value unchanged from the default
(or previous) setting.

Enabling the keep-alive functionality will set the following socket options:

* `SO_KEEPALIVE=1`
* `TCP_KEEPIDLE=initialDelay`
* `TCP_KEEPCNT=10`
* `TCP_KEEPINTVL=1`

### `socket.setNoDelay([noDelay])`

<!-- YAML
added: v0.1.90
-->

* `noDelay` {boolean} **Default:** `true`
* Returns: {net.Socket} The socket itself.

Enable/disable the use of Nagle's algorithm.

When a TCP connection is created, it will have Nagle's algorithm enabled.

Nagle's algorithm delays data before it is sent via the network. It attempts
to optimize throughput at the expense of latency.

Passing `true` for `noDelay` or not passing an argument will disable Nagle's
algorithm for the socket. Passing `false` for `noDelay` will enable Nagle's
algorithm.

### `socket.setTimeout(timeout[, callback])`

<!-- YAML
added: v0.1.90
changes:
  - version: v18.0.0
    pr-url: https://github.com/nodejs/node/pull/41678
    description: Passing an invalid callback to the `callback` argument
                 now throws `ERR_INVALID_ARG_TYPE` instead of
                 `ERR_INVALID_CALLBACK`.
-->

* `timeout` {number}
* `callback` {Function}
* Returns: {net.Socket} The socket itself.

Sets the socket to timeout after `timeout` milliseconds of inactivity on
the socket. By default `net.Socket` do not have a timeout.

When an idle timeout is triggered the socket will receive a [`'timeout'`][]
event but the connection will not be severed. The user must manually call
[`socket.end()`][] or [`socket.destroy()`][] to end the connection.

```js
socket.setTimeout(3000);
socket.on('timeout', () => {
  console.log('socket timeout');
  socket.end();
});
```

If `timeout` is 0, then the existing idle timeout is disabled.

The optional `callback` parameter will be added as a one-time listener for the
[`'timeout'`][] event.

### `socket.timeout`

<!-- YAML
added: v10.7.0
-->

* {number|undefined}

The socket timeout in milliseconds as set by [`socket.setTimeout()`][].
It is `undefined` if a timeout has not been set.

### `socket.unref()`

<!-- YAML
added: v0.9.1
-->

* Returns: {net.Socket} The socket itself.

Calling `unref()` on a socket will allow the program to exit if this is the only
active socket in the event system. If the socket is already `unref`ed calling
`unref()` again will have no effect.

### `socket.write(data[, encoding][, callback])`

<!-- YAML
added: v0.1.90
-->

* `data` {string|Buffer|Uint8Array}
* `encoding` {string} Only used when data is `string`. **Default:** `utf8`.
* `callback` {Function}
* Returns: {boolean}

Sends data on the socket. The second parameter specifies the encoding in the
case of a string. It defaults to UTF8 encoding.

Returns `true` if the entire data was flushed successfully to the kernel
buffer. Returns `false` if all or part of the data was queued in user memory.
[`'drain'`][] will be emitted when the buffer is again free.

The optional `callback` parameter will be executed when the data is finally
written out, which may not be immediately.

See `Writable` stream [`write()`][stream_writable_write] method for more
information.

### `socket.readyState`

<!-- YAML
added: v0.5.0
-->

* {string}

This property represents the state of the connection as a string.

* If the stream is connecting `socket.readyState` is `opening`.
* If the stream is readable and writable, it is `open`.
* If the stream is readable and not writable, it is `readOnly`.
* If the stream is not readable and writable, it is `writeOnly`.

## `net.connect()`

Aliases to
[`net.createConnection()`][`net.createConnection()`].

Possible signatures:

* [`net.connect(options[, connectListener])`][`net.connect(options)`]
* [`net.connect(path[, connectListener])`][`net.connect(path)`] for [IPC][]
  connections.
* [`net.connect(port[, host][, connectListener])`][`net.connect(port, host)`]
  for TCP connections.

### `net.connect(options[, connectListener])`

<!-- YAML
added: v0.7.0
-->

* `options` {Object}
* `connectListener` {Function}
* Returns: {net.Socket}

Alias to
[`net.createConnection(options[, connectListener])`][`net.createConnection(options)`].

### `net.connect(path[, connectListener])`

<!-- YAML
added: v0.1.90
-->

* `path` {string}
* `connectListener` {Function}
* Returns: {net.Socket}

Alias to
[`net.createConnection(path[, connectListener])`][`net.createConnection(path)`].

### `net.connect(port[, host][, connectListener])`

<!-- YAML
added: v0.1.90
-->

* `port` {number}
* `host` {string}
* `connectListener` {Function}
* Returns: {net.Socket}

Alias to
[`net.createConnection(port[, host][, connectListener])`][`net.createConnection(port, host)`].

## `net.createConnection()`

A factory function, which creates a new [`net.Socket`][],
immediately initiates connection with [`socket.connect()`][],
then returns the `net.Socket` that starts the connection.

When the connection is established, a [`'connect'`][] event will be emitted
on the returned socket. The last parameter `connectListener`, if supplied,
will be added as a listener for the [`'connect'`][] event **once**.

Possible signatures:

* [`net.createConnection(options[, connectListener])`][`net.createConnection(options)`]
* [`net.createConnection(path[, connectListener])`][`net.createConnection(path)`]
  for [IPC][] connections.
* [`net.createConnection(port[, host][, connectListener])`][`net.createConnection(port, host)`]
  for TCP connections.

The [`net.connect()`][] function is an alias to this function.

### `net.createConnection(options[, connectListener])`

<!-- YAML
added: v0.1.90
-->

* `options` {Object} Required. Will be passed to both the
  [`new net.Socket([options])`][`new net.Socket(options)`] call and the
  [`socket.connect(options[, connectListener])`][`socket.connect(options)`]
  method.
* `connectListener` {Function} Common parameter of the
  [`net.createConnection()`][] functions. If supplied, will be added as
  a listener for the [`'connect'`][] event on the returned socket once.
* Returns: {net.Socket} The newly created socket used to start the connection.

For available options, see
[`new net.Socket([options])`][`new net.Socket(options)`]
and [`socket.connect(options[, connectListener])`][`socket.connect(options)`].

Additional options:

* `timeout` {number} If set, will be used to call
  [`socket.setTimeout(timeout)`][] after the socket is created, but before
  it starts the connection.

Following is an example of a client of the echo server described
in the [`net.createServer()`][] section:

```js
const net = require('node:net');
const client = net.createConnection({ port: 8124 }, () => {
  // 'connect' listener.
  console.log('connected to server!');
  client.write('world!\r\n');
});
client.on('data', (data) => {
  console.log(data.toString());
  client.end();
});
client.on('end', () => {
  console.log('disconnected from server');
});
```

To connect on the socket `/tmp/echo.sock`:

```js
const client = net.createConnection({ path: '/tmp/echo.sock' });
```

### `net.createConnection(path[, connectListener])`

<!-- YAML
added: v0.1.90
-->

* `path` {string} Path the socket should connect to. Will be passed to
  [`socket.connect(path[, connectListener])`][`socket.connect(path)`].
  See [Identifying paths for IPC connections][].
* `connectListener` {Function} Common parameter of the
  [`net.createConnection()`][] functions, an "once" listener for the
  `'connect'` event on the initiating socket. Will be passed to
  [`socket.connect(path[, connectListener])`][`socket.connect(path)`].
* Returns: {net.Socket} The newly created socket used to start the connection.

Initiates an [IPC][] connection.

This function creates a new [`net.Socket`][] with all options set to default,
immediately initiates connection with
[`socket.connect(path[, connectListener])`][`socket.connect(path)`],
then returns the `net.Socket` that starts the connection.

### `net.createConnection(port[, host][, connectListener])`

<!-- YAML
added: v0.1.90
-->

* `port` {number} Port the socket should connect to. Will be passed to
  [`socket.connect(port[, host][, connectListener])`][`socket.connect(port)`].
* `host` {string} Host the socket should connect to. Will be passed to
  [`socket.connect(port[, host][, connectListener])`][`socket.connect(port)`].
  **Default:** `'localhost'`.
* `connectListener` {Function} Common parameter of the
  [`net.createConnection()`][] functions, an "once" listener for the
  `'connect'` event on the initiating socket. Will be passed to
  [`socket.connect(port[, host][, connectListener])`][`socket.connect(port)`].
* Returns: {net.Socket} The newly created socket used to start the connection.

Initiates a TCP connection.

This function creates a new [`net.Socket`][] with all options set to default,
immediately initiates connection with
[`socket.connect(port[, host][, connectListener])`][`socket.connect(port)`],
then returns the `net.Socket` that starts the connection.

## `net.createServer([options][, connectionListener])`

<!-- YAML
added: v0.5.0
changes:
  - version: v20.1.0
    pr-url: https://github.com/nodejs/node/pull/47405
    description: The `highWaterMark` option is supported now.
  - version:
    - v17.7.0
    - v16.15.0
    pr-url: https://github.com/nodejs/node/pull/41310
    description: The `noDelay`, `keepAlive`, and `keepAliveInitialDelay`
                 options are supported now.
-->

* `options` {Object}
  * `allowHalfOpen` {boolean} If set to `false`, then the socket will
    automatically end the writable side when the readable side ends.
    **Default:** `false`.
  * `highWaterMark` {number} Optionally overrides all [`net.Socket`][]s'
    `readableHighWaterMark` and `writableHighWaterMark`.
    **Default:** See [`stream.getDefaultHighWaterMark()`][].
  * `pauseOnConnect` {boolean} Indicates whether the socket should be
    paused on incoming connections. **Default:** `false`.
  * `noDelay` {boolean} If set to `true`, it disables the use of Nagle's algorithm immediately
    after a new incoming connection is received. **Default:** `false`.
  * `keepAlive` {boolean} If set to `true`, it enables keep-alive functionality on the socket
    immediately after a new incoming connection is received, similarly on what is done in
    [`socket.setKeepAlive([enable][, initialDelay])`][`socket.setKeepAlive(enable, initialDelay)`].
    **Default:** `false`.
  * `keepAliveInitialDelay` {number} If set to a positive number, it sets the initial delay before
    the first keepalive probe is sent on an idle socket.**Default:** `0`.

* `connectionListener` {Function} Automatically set as a listener for the
  [`'connection'`][] event.

* Returns: {net.Server}

Creates a new TCP or [IPC][] server.

If `allowHalfOpen` is set to `true`, when the other end of the socket
signals the end of transmission, the server will only send back the end of
transmission when [`socket.end()`][] is explicitly called. For example, in the
context of TCP, when a FIN packed is received, a FIN packed is sent
back only when [`socket.end()`][] is explicitly called. Until then the
connection is half-closed (non-readable but still writable). See [`'end'`][]
event and [RFC 1122][half-closed] (section 4.2.2.13) for more information.

If `pauseOnConnect` is set to `true`, then the socket associated with each
incoming connection will be paused, and no data will be read from its handle.
This allows connections to be passed between processes without any data being
read by the original process. To begin reading data from a paused socket, call
[`socket.resume()`][].

The server can be a TCP server or an [IPC][] server, depending on what it
[`listen()`][`server.listen()`] to.

Here is an example of a TCP echo server which listens for connections
on port 8124:

```js
const net = require('node:net');
const server = net.createServer((c) => {
  // 'connection' listener.
  console.log('client connected');
  c.on('end', () => {
    console.log('client disconnected');
  });
  c.write('hello\r\n');
  c.pipe(c);
});
server.on('error', (err) => {
  throw err;
});
server.listen(8124, () => {
  console.log('server bound');
});
```

Test this by using `telnet`:

```console
$ telnet localhost 8124
```

To listen on the socket `/tmp/echo.sock`:

```js
server.listen('/tmp/echo.sock', () => {
  console.log('server bound');
});
```

Use `nc` to connect to a Unix domain socket server:

```console
$ nc -U /tmp/echo.sock
```

## `net.getDefaultAutoSelectFamily()`

<!-- YAML
added: v19.4.0
-->

Gets the current default value of the `autoSelectFamily` option of [`socket.connect(options)`][].
The initial default value is `true`, unless the command line option
`--no-network-family-autoselection` is provided.

* Returns: {boolean} The current default value of the `autoSelectFamily` option.

## `net.setDefaultAutoSelectFamily(value)`

<!-- YAML
added: v19.4.0
-->

Sets the default value of the `autoSelectFamily` option of [`socket.connect(options)`][].

* `value` {boolean} The new default value. The initial default value is `false`.

## `net.getDefaultAutoSelectFamilyAttemptTimeout()`

<!-- YAML
added: v19.8.0
-->

Gets the current default value of the `autoSelectFamilyAttemptTimeout` option of [`socket.connect(options)`][].
The initial default value is `250`.

* Returns: {number} The current default value of the `autoSelectFamilyAttemptTimeout` option.

## `net.setDefaultAutoSelectFamilyAttemptTimeout(value)`

<!-- YAML
added: v19.8.0
-->

Sets the default value of the `autoSelectFamilyAttemptTimeout` option of [`socket.connect(options)`][].

* `value` {number} The new default value, which must be a positive number. If the number is less than `10`,
  the value `10` is used instead. The initial default value is `250`.

## `net.isIP(input)`

<!-- YAML
added: v0.3.0
-->

* `input` {string}
* Returns: {integer}

Returns `6` if `input` is an IPv6 address. Returns `4` if `input` is an IPv4
address in [dot-decimal notation][] with no leading zeroes. Otherwise, returns
`0`.

```js
net.isIP('::1'); // returns 6
net.isIP('127.0.0.1'); // returns 4
net.isIP('127.000.000.001'); // returns 0
net.isIP('127.0.0.1/24'); // returns 0
net.isIP('fhqwhgads'); // returns 0
```

## `net.isIPv4(input)`

<!-- YAML
added: v0.3.0
-->

* `input` {string}
* Returns: {boolean}

Returns `true` if `input` is an IPv4 address in [dot-decimal notation][] with no
leading zeroes. Otherwise, returns `false`.

```js
net.isIPv4('127.0.0.1'); // returns true
net.isIPv4('127.000.000.001'); // returns false
net.isIPv4('127.0.0.1/24'); // returns false
net.isIPv4('fhqwhgads'); // returns false
```

## `net.isIPv6(input)`

<!-- YAML
added: v0.3.0
-->

* `input` {string}
* Returns: {boolean}

Returns `true` if `input` is an IPv6 address. Otherwise, returns `false`.

```js
net.isIPv6('::1'); // returns true
net.isIPv6('fhqwhgads'); // returns false
```

[IPC]: #ipc-support
[Identifying paths for IPC connections]: #identifying-paths-for-ipc-connections
[RFC 8305]: https://www.rfc-editor.org/rfc/rfc8305.txt
[Readable Stream]: stream.md#class-streamreadable
[`'close'`]: #event-close
[`'connect'`]: #event-connect
[`'connection'`]: #event-connection
[`'data'`]: #event-data
[`'drain'`]: #event-drain
[`'end'`]: #event-end
[`'error'`]: #event-error_1
[`'listening'`]: #event-listening
[`'timeout'`]: #event-timeout
[`EventEmitter`]: events.md#class-eventemitter
[`child_process.fork()`]: child_process.md#child_processforkmodulepath-args-options
[`dns.lookup()`]: dns.md#dnslookuphostname-options-callback
[`dns.lookup()` hints]: dns.md#supported-getaddrinfo-flags
[`net.Server`]: #class-netserver
[`net.Socket`]: #class-netsocket
[`net.connect()`]: #netconnect
[`net.connect(options)`]: #netconnectoptions-connectlistener
[`net.connect(path)`]: #netconnectpath-connectlistener
[`net.connect(port, host)`]: #netconnectport-host-connectlistener
[`net.createConnection()`]: #netcreateconnection
[`net.createConnection(options)`]: #netcreateconnectionoptions-connectlistener
[`net.createConnection(path)`]: #netcreateconnectionpath-connectlistener
[`net.createConnection(port, host)`]: #netcreateconnectionport-host-connectlistener
[`net.createServer()`]: #netcreateserveroptions-connectionlistener
[`net.getDefaultAutoSelectFamily()`]: #netgetdefaultautoselectfamily
[`net.getDefaultAutoSelectFamilyAttemptTimeout()`]: #netgetdefaultautoselectfamilyattempttimeout
[`new net.Socket(options)`]: #new-netsocketoptions
[`readable.setEncoding()`]: stream.md#readablesetencodingencoding
[`server.close()`]: #serverclosecallback
[`server.listen()`]: #serverlisten
[`server.listen(handle)`]: #serverlistenhandle-backlog-callback
[`server.listen(options)`]: #serverlistenoptions-callback
[`server.listen(path)`]: #serverlistenpath-backlog-callback
[`server.listen(port)`]: #serverlistenport-host-backlog-callback
[`socket(7)`]: https://man7.org/linux/man-pages/man7/socket.7.html
[`socket.connect()`]: #socketconnect
[`socket.connect(options)`]: #socketconnectoptions-connectlistener
[`socket.connect(path)`]: #socketconnectpath-connectlistener
[`socket.connect(port)`]: #socketconnectport-host-connectlistener
[`socket.connecting`]: #socketconnecting
[`socket.destroy()`]: #socketdestroyerror
[`socket.end()`]: #socketenddata-encoding-callback
[`socket.pause()`]: #socketpause
[`socket.resume()`]: #socketresume
[`socket.setEncoding()`]: #socketsetencodingencoding
[`socket.setKeepAlive(enable, initialDelay)`]: #socketsetkeepaliveenable-initialdelay
[`socket.setTimeout()`]: #socketsettimeouttimeout-callback
[`socket.setTimeout(timeout)`]: #socketsettimeouttimeout-callback
[`stream.getDefaultHighWaterMark()`]: stream.md#streamgetdefaulthighwatermarkobjectmode
[`writable.destroy()`]: stream.md#writabledestroyerror
[`writable.destroyed`]: stream.md#writabledestroyed
[`writable.end()`]: stream.md#writableendchunk-encoding-callback
[`writable.writableLength`]: stream.md#writablewritablelength
[dot-decimal notation]: https://en.wikipedia.org/wiki/Dot-decimal_notation
[half-closed]: https://tools.ietf.org/html/rfc1122
[stream_writable_write]: stream.md#writablewritechunk-encoding-callback
[unspecified IPv4 address]: https://en.wikipedia.org/wiki/0.0.0.0
[unspecified IPv6 address]: https://en.wikipedia.org/wiki/IPv6_address#Unspecified_address