Merge

.hgtags-top-repo

@@ -292,3 +292,4 @@ f7c11da0b0481d49cc7a65a453336c108191e821 jdk9-b42
 b6cca3e6175a69f39e5799b7349ddb0176630291 jdk9-b47
 0064e246d83f6f9fc245c19b6d05041ecaf4b6d4 jdk9-b48
 d91ed1951b948210590ce1394bea5515357246ba jdk9-b49
+d1f37d39ff2421f956a6ddf316cf763807bc3363 jdk9-b50

README-builds.html

@@ -1463,14 +1463,13 @@
 
                 <h4>Building with ccache</h4>
 
-                <p>A simple way to radically speed up compilation of native code
+                <p>The OpenJDK build supports building with ccache 
-                    (typically hotspot and native libraries in JDK) is to install
+                    when using gcc or clang. Using ccache can
-                    ccache. This will cache and reuse prior compilation results, if the
+                    radically speed up compilation of native code if
-                    source code is unchanged. However, ccache versions prior to 3.1.4
+                    you often rebuild the same sources. Your milage
-                    does not work correctly with the precompiled headers used in
+                    may vary however so we recommend evaluating it for
-                    OpenJDK. So if your platform supports ccache at 3.1.4 or later, we
+                    yourself. To enable it, make sure it's on the path
-                    highly recommend installing it. This is currently only supported on
+                    and configure with <code>--enable-ccache</code>.</p> 
-                    linux.</p> 
 
                 <h4>Building on local disk</h4>
 

common/autoconf/basics.m4

@@ -242,6 +242,9 @@ AC_DEFUN_ONCE([BASIC_INIT],
 [
   # Save the original command line. This is passed to us by the wrapper configure script.
   AC_SUBST(CONFIGURE_COMMAND_LINE)
+  # Save the path variable before it gets changed
+  ORIGINAL_PATH="$PATH"
+  AC_SUBST(ORIGINAL_PATH)
   DATE_WHEN_CONFIGURED=`LANG=C date`
   AC_SUBST(DATE_WHEN_CONFIGURED)
   AC_MSG_NOTICE([Configuration created at $DATE_WHEN_CONFIGURED.])

common/autoconf/build-performance.m4

@@ -164,19 +164,26 @@ AC_DEFUN([BPERF_SETUP_CCACHE],
       [enable using ccache to speed up recompilations @<:@disabled@:>@])])
 
   CCACHE=
+  CCACHE_STATUS=
   AC_MSG_CHECKING([is ccache enabled])
-  ENABLE_CCACHE=$enable_ccache
   if test "x$enable_ccache" = xyes; then
-    AC_MSG_RESULT([yes])
+    if test "x$TOOLCHAIN_TYPE" = "xgcc" -o "x$TOOLCHAIN_TYPE" = "xclang"; then
-    OLD_PATH="$PATH"
+      AC_MSG_RESULT([yes])
-    if test "x$TOOLCHAIN_PATH" != x; then
+      OLD_PATH="$PATH"
-      PATH=$TOOLCHAIN_PATH:$PATH
+      if test "x$TOOLCHAIN_PATH" != x; then
+        PATH=$TOOLCHAIN_PATH:$PATH
+      fi
+      BASIC_REQUIRE_PROGS(CCACHE, ccache)
+      PATH="$OLD_PATH"
+      CCACHE_VERSION=[`$CCACHE --version | head -n1 | $SED 's/[A-Za-z ]*//'`]
+      CCACHE_STATUS="Active ($CCACHE_VERSION)"
+    else
+      AC_MSG_RESULT([no])
+      AC_MSG_WARN([ccache is not supported with toolchain type $TOOLCHAIN_TYPE])
     fi
-    BASIC_REQUIRE_PROGS(CCACHE, ccache)
-    CCACHE_STATUS="enabled"
-    PATH="$OLD_PATH"
   elif test "x$enable_ccache" = xno; then
     AC_MSG_RESULT([no, explicitly disabled])
+    CCACHE_STATUS="Disabled"
   elif test "x$enable_ccache" = x; then
     AC_MSG_RESULT([no])
   else
@@ -206,35 +213,31 @@ AC_DEFUN([BPERF_SETUP_CCACHE],
 AC_DEFUN([BPERF_SETUP_CCACHE_USAGE],
 [
   if test "x$CCACHE" != x; then
-    # Only use ccache if it is 3.1.4 or later, which supports
+    if test "x$USE_PRECOMPILED_HEADER" = "x1"; then
-    # precompiled headers.
+      HAS_BAD_CCACHE=[`$ECHO $CCACHE_VERSION | \
-    AC_MSG_CHECKING([if ccache supports precompiled headers])
+          $GREP -e '^1.*' -e '^2.*' -e '^3\.0.*' -e '^3\.1\.[0123]'`]
-    HAS_GOOD_CCACHE=`($CCACHE --version | head -n 1 | grep -E 3.1.@<:@456789@:>@) 2> /dev/null`
+      if test "x$HAS_BAD_CCACHE" != "x"; then
-    if test "x$HAS_GOOD_CCACHE" = x; then
+        AC_MSG_ERROR([Precompiled headers requires ccache 3.1.4 or later, found $CCACHE_VERSION])
-      AC_MSG_RESULT([no, disabling ccache])
+      fi
-      CCACHE=
-      CCACHE_STATUS="disabled"
-    else
-      AC_MSG_RESULT([yes])
       AC_MSG_CHECKING([if C-compiler supports ccache precompiled headers])
+      CCACHE_PRECOMP_FLAG="-fpch-preprocess"
       PUSHED_FLAGS="$CXXFLAGS"
-      CXXFLAGS="-fpch-preprocess $CXXFLAGS"
+      CXXFLAGS="$CCACHE_PRECOMP_FLAG $CXXFLAGS"
       AC_COMPILE_IFELSE([AC_LANG_PROGRAM([], [])], [CC_KNOWS_CCACHE_TRICK=yes], [CC_KNOWS_CCACHE_TRICK=no])
       CXXFLAGS="$PUSHED_FLAGS"
       if test "x$CC_KNOWS_CCACHE_TRICK" = xyes; then
         AC_MSG_RESULT([yes])
+        CFLAGS_CCACHE="$CCACHE_PRECOMP_FLAG"
+        AC_SUBST(CFLAGS_CCACHE)
+        CCACHE_SLOPPINESS=pch_defines,time_macros
       else
-        AC_MSG_RESULT([no, disabling ccaching of precompiled headers])
+        AC_MSG_RESULT([no])
-        CCACHE=
+        AC_MSG_ERROR([Cannot use ccache with precompiled headers without compiler support for $CCACHE_PRECOMP_FLAG])
-        CCACHE_STATUS="disabled"
       fi
     fi
-  fi
 
-  if test "x$CCACHE" != x; then
+    CCACHE="CCACHE_COMPRESS=1 $SET_CCACHE_DIR \
-    CCACHE_SLOPPINESS=time_macros
+        CCACHE_SLOPPINESS=$CCACHE_SLOPPINESS CCACHE_BASEDIR=$TOPDIR $CCACHE"
-    CCACHE="CCACHE_COMPRESS=1 $SET_CCACHE_DIR CCACHE_SLOPPINESS=$CCACHE_SLOPPINESS $CCACHE"
-    CCACHE_FLAGS=-fpch-preprocess
 
     if test "x$SET_CCACHE_DIR" != x; then
       mkdir -p $CCACHE_DIR > /dev/null 2>&1

common/autoconf/configure

@@ -40,8 +40,9 @@ if test "x$BASH" = x; then
   echo "Error: This script must be run using bash." 1>&2
   exit 1
 fi
-# Force autoconf to use bash
+# Force autoconf to use bash. This also means we must disable autoconf re-exec.
 export CONFIG_SHELL=$BASH
+export _as_can_reexec=no
 
 conf_script_dir="$TOPDIR/common/autoconf"
 

common/autoconf/generated-configure.sh

@@ -629,6 +629,7 @@ ac_includes_default="\
 
 ac_subst_vars='LTLIBOBJS
 LIBOBJS
+CFLAGS_CCACHE
 CCACHE
 USE_PRECOMPILED_HEADER
 SJAVAC_SERVER_DIR
@@ -991,6 +992,7 @@ CAT
 BASH
 BASENAME
 DATE_WHEN_CONFIGURED
+ORIGINAL_PATH
 CONFIGURE_COMMAND_LINE
 target_alias
 host_alias
@@ -4333,7 +4335,7 @@ TOOLCHAIN_DESCRIPTION_xlc="IBM XL C/C++"
 #CUSTOM_AUTOCONF_INCLUDE
 
 # Do not change or remove the following line, it is needed for consistency checks:
-DATE_WHEN_GENERATED=1421247827
+DATE_WHEN_GENERATED=1423567509
 
 ###############################################################################
 #
@@ -4366,6 +4368,9 @@ DATE_WHEN_GENERATED=1421247827
 
   # Save the original command line. This is passed to us by the wrapper configure script.
 
+  # Save the path variable before it gets changed
+  ORIGINAL_PATH="$PATH"
+
   DATE_WHEN_CONFIGURED=`LANG=C date`
 
   { $as_echo "$as_me:${as_lineno-$LINENO}: Configuration created at $DATE_WHEN_CONFIGURED." >&5
@@ -27438,8 +27443,8 @@ $as_echo "$as_me: Trying to extract Visual Studio environment variables" >&6;}
     # The trailing space for everyone except PATH is no typo, but is needed due
     # to trailing \ in the Windows paths. These will be stripped later.
     $ECHO "$WINPATH_BASH -c 'echo VS_PATH="'\"$PATH\" > set-vs-env.sh' >> $EXTRACT_VC_ENV_BAT_FILE
-    $ECHO "$WINPATH_BASH -c 'echo VS_INCLUDE="'\"$INCLUDE \" >> set-vs-env.sh' >> $EXTRACT_VC_ENV_BAT_FILE
+    $ECHO "$WINPATH_BASH -c 'echo VS_INCLUDE="'\"$INCLUDE\;$include \" >> set-vs-env.sh' >> $EXTRACT_VC_ENV_BAT_FILE
-    $ECHO "$WINPATH_BASH -c 'echo VS_LIB="'\"$LIB \" >> set-vs-env.sh' >> $EXTRACT_VC_ENV_BAT_FILE
+    $ECHO "$WINPATH_BASH -c 'echo VS_LIB="'\"$LIB\;$lib \" >> set-vs-env.sh' >> $EXTRACT_VC_ENV_BAT_FILE
     $ECHO "$WINPATH_BASH -c 'echo VCINSTALLDIR="'\"$VCINSTALLDIR \" >> set-vs-env.sh' >> $EXTRACT_VC_ENV_BAT_FILE
     $ECHO "$WINPATH_BASH -c 'echo WindowsSdkDir="'\"$WindowsSdkDir \" >> set-vs-env.sh' >> $EXTRACT_VC_ENV_BAT_FILE
     $ECHO "$WINPATH_BASH -c 'echo WINDOWSSDKDIR="'\"$WINDOWSSDKDIR \" >> set-vs-env.sh' >> $EXTRACT_VC_ENV_BAT_FILE
@@ -27486,9 +27491,9 @@ $as_echo "present but broken" >&6; }
     else
       { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
 $as_echo "ok" >&6; }
-      # Remove any trailing "\" and " " from the variables.
+      # Remove any trailing "\" ";" and " " from the variables.
-      VS_INCLUDE=`$ECHO "$VS_INCLUDE" | $SED 's/\\\\* *$//'`
+      VS_INCLUDE=`$ECHO "$VS_INCLUDE" | $SED -e 's/\\\\*;* *$//'`
-      VS_LIB=`$ECHO "$VS_LIB" | $SED 's/\\\\* *$//'`
+      VS_LIB=`$ECHO "$VS_LIB" | $SED 's/\\\\*;* *$//'`
       VCINSTALLDIR=`$ECHO "$VCINSTALLDIR" | $SED 's/\\\\* *$//'`
       WindowsSDKDir=`$ECHO "$WindowsSDKDir" | $SED 's/\\\\* *$//'`
       WINDOWSSDKDIR=`$ECHO "$WINDOWSSDKDIR" | $SED 's/\\\\* *$//'`
@@ -27499,6 +27504,268 @@ $as_echo "ok" >&6; }
 
 
 
+
+      # Convert VS_INCLUDE into SYSROOT_CFLAGS
+      OLDIFS="$IFS"
+      IFS=";"
+      for i in $VS_INCLUDE; do
+        ipath=$i
+	IFS="$OLDIFS"
+
+  if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
+
+  # Input might be given as Windows format, start by converting to
+  # unix format.
+  path="$ipath"
+  new_path=`$CYGPATH -u "$path"`
+
+  # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
+  # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
+  # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
+  # "foo.exe" is OK but "foo" is an error.
+  #
+  # This test is therefore slightly more accurate than "test -f" to check for file precense.
+  # It is also a way to make sure we got the proper file name for the real test later on.
+  test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
+  if test "x$test_shortpath" = x; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: The path of ipath, which resolves as \"$path\", is invalid." >&5
+$as_echo "$as_me: The path of ipath, which resolves as \"$path\", is invalid." >&6;}
+    as_fn_error $? "Cannot locate the the path of ipath" "$LINENO" 5
+  fi
+
+  # Call helper function which possibly converts this using DOS-style short mode.
+  # If so, the updated path is stored in $new_path.
+
+  input_path="$new_path"
+  # Check if we need to convert this using DOS-style short mode. If the path
+  # contains just simple characters, use it. Otherwise (spaces, weird characters),
+  # take no chances and rewrite it.
+  # Note: m4 eats our [], so we need to use [ and ] instead.
+  has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
+  if test "x$has_forbidden_chars" != x; then
+    # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
+    shortmode_path=`$CYGPATH -s -m -a "$input_path"`
+    path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
+    if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
+      # Going to short mode and back again did indeed matter. Since short mode is
+      # case insensitive, let's make it lowercase to improve readability.
+      shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+      # Now convert it back to Unix-stile (cygpath)
+      input_path=`$CYGPATH -u "$shortmode_path"`
+      new_path="$input_path"
+    fi
+  fi
+
+  test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
+  if test "x$test_cygdrive_prefix" = x; then
+    # As a simple fix, exclude /usr/bin since it's not a real path.
+    if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
+      # The path is in a Cygwin special directory (e.g. /home). We need this converted to
+      # a path prefixed by /cygdrive for fixpath to work.
+      new_path="$CYGWIN_ROOT_PATH$input_path"
+    fi
+  fi
+
+
+  if test "x$path" != "x$new_path"; then
+    ipath="$new_path"
+    { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting ipath to \"$new_path\"" >&5
+$as_echo "$as_me: Rewriting ipath to \"$new_path\"" >&6;}
+  fi
+
+  elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+
+  path="$ipath"
+  has_colon=`$ECHO $path | $GREP ^.:`
+  new_path="$path"
+  if test "x$has_colon" = x; then
+    # Not in mixed or Windows style, start by that.
+    new_path=`cmd //c echo $path`
+  fi
+
+
+  input_path="$new_path"
+  # Check if we need to convert this using DOS-style short mode. If the path
+  # contains just simple characters, use it. Otherwise (spaces, weird characters),
+  # take no chances and rewrite it.
+  # Note: m4 eats our [], so we need to use [ and ] instead.
+  has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
+  if test "x$has_forbidden_chars" != x; then
+    # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
+    new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+  fi
+
+
+  windows_path="$new_path"
+  if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
+    unix_path=`$CYGPATH -u "$windows_path"`
+    new_path="$unix_path"
+  elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+    unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
+    new_path="$unix_path"
+  fi
+
+  if test "x$path" != "x$new_path"; then
+    ipath="$new_path"
+    { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting ipath to \"$new_path\"" >&5
+$as_echo "$as_me: Rewriting ipath to \"$new_path\"" >&6;}
+  fi
+
+  # Save the first 10 bytes of this path to the storage, so fixpath can work.
+  all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
+
+  else
+    # We're on a unix platform. Hooray! :)
+    path="$ipath"
+    has_space=`$ECHO "$path" | $GREP " "`
+    if test "x$has_space" != x; then
+      { $as_echo "$as_me:${as_lineno-$LINENO}: The path of ipath, which resolves as \"$path\", is invalid." >&5
+$as_echo "$as_me: The path of ipath, which resolves as \"$path\", is invalid." >&6;}
+      as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
+    fi
+
+    # Use eval to expand a potential ~
+    eval path="$path"
+    if test ! -f "$path" && test ! -d "$path"; then
+      as_fn_error $? "The path of ipath, which resolves as \"$path\", is not found." "$LINENO" 5
+    fi
+
+    ipath="`cd "$path"; $THEPWDCMD -L`"
+  fi
+
+	IFS=";"
+      	SYSROOT_CFLAGS="$SYSROOT_CFLAGS -I$ipath"
+      done
+      # Convert VS_LIB into SYSROOT_LDFLAGS
+      for i in $VS_LIB; do
+        libpath=$i
+	IFS="$OLDIFS"
+
+  if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
+
+  # Input might be given as Windows format, start by converting to
+  # unix format.
+  path="$libpath"
+  new_path=`$CYGPATH -u "$path"`
+
+  # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
+  # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
+  # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
+  # "foo.exe" is OK but "foo" is an error.
+  #
+  # This test is therefore slightly more accurate than "test -f" to check for file precense.
+  # It is also a way to make sure we got the proper file name for the real test later on.
+  test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
+  if test "x$test_shortpath" = x; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: The path of libpath, which resolves as \"$path\", is invalid." >&5
+$as_echo "$as_me: The path of libpath, which resolves as \"$path\", is invalid." >&6;}
+    as_fn_error $? "Cannot locate the the path of libpath" "$LINENO" 5
+  fi
+
+  # Call helper function which possibly converts this using DOS-style short mode.
+  # If so, the updated path is stored in $new_path.
+
+  input_path="$new_path"
+  # Check if we need to convert this using DOS-style short mode. If the path
+  # contains just simple characters, use it. Otherwise (spaces, weird characters),
+  # take no chances and rewrite it.
+  # Note: m4 eats our [], so we need to use [ and ] instead.
+  has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
+  if test "x$has_forbidden_chars" != x; then
+    # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
+    shortmode_path=`$CYGPATH -s -m -a "$input_path"`
+    path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
+    if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
+      # Going to short mode and back again did indeed matter. Since short mode is
+      # case insensitive, let's make it lowercase to improve readability.
+      shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+      # Now convert it back to Unix-stile (cygpath)
+      input_path=`$CYGPATH -u "$shortmode_path"`
+      new_path="$input_path"
+    fi
+  fi
+
+  test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
+  if test "x$test_cygdrive_prefix" = x; then
+    # As a simple fix, exclude /usr/bin since it's not a real path.
+    if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
+      # The path is in a Cygwin special directory (e.g. /home). We need this converted to
+      # a path prefixed by /cygdrive for fixpath to work.
+      new_path="$CYGWIN_ROOT_PATH$input_path"
+    fi
+  fi
+
+
+  if test "x$path" != "x$new_path"; then
+    libpath="$new_path"
+    { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting libpath to \"$new_path\"" >&5
+$as_echo "$as_me: Rewriting libpath to \"$new_path\"" >&6;}
+  fi
+
+  elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+
+  path="$libpath"
+  has_colon=`$ECHO $path | $GREP ^.:`
+  new_path="$path"
+  if test "x$has_colon" = x; then
+    # Not in mixed or Windows style, start by that.
+    new_path=`cmd //c echo $path`
+  fi
+
+
+  input_path="$new_path"
+  # Check if we need to convert this using DOS-style short mode. If the path
+  # contains just simple characters, use it. Otherwise (spaces, weird characters),
+  # take no chances and rewrite it.
+  # Note: m4 eats our [], so we need to use [ and ] instead.
+  has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
+  if test "x$has_forbidden_chars" != x; then
+    # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
+    new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+  fi
+
+
+  windows_path="$new_path"
+  if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
+    unix_path=`$CYGPATH -u "$windows_path"`
+    new_path="$unix_path"
+  elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+    unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
+    new_path="$unix_path"
+  fi
+
+  if test "x$path" != "x$new_path"; then
+    libpath="$new_path"
+    { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting libpath to \"$new_path\"" >&5
+$as_echo "$as_me: Rewriting libpath to \"$new_path\"" >&6;}
+  fi
+
+  # Save the first 10 bytes of this path to the storage, so fixpath can work.
+  all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
+
+  else
+    # We're on a unix platform. Hooray! :)
+    path="$libpath"
+    has_space=`$ECHO "$path" | $GREP " "`
+    if test "x$has_space" != x; then
+      { $as_echo "$as_me:${as_lineno-$LINENO}: The path of libpath, which resolves as \"$path\", is invalid." >&5
+$as_echo "$as_me: The path of libpath, which resolves as \"$path\", is invalid." >&6;}
+      as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
+    fi
+
+    # Use eval to expand a potential ~
+    eval path="$path"
+    if test ! -f "$path" && test ! -d "$path"; then
+      as_fn_error $? "The path of libpath, which resolves as \"$path\", is not found." "$LINENO" 5
+    fi
+
+    libpath="`cd "$path"; $THEPWDCMD -L`"
+  fi
+
+	IFS=";"
+      	SYSROOT_LDFLAGS="$SYSROOT_LDFLAGS -libpath:$libpath"
+      done
+      IFS="$OLDIFS"
     fi
   else
     { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
@@ -50616,16 +50883,17 @@ fi
 
 
   CCACHE=
+  CCACHE_STATUS=
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking is ccache enabled" >&5
 $as_echo_n "checking is ccache enabled... " >&6; }
-  ENABLE_CCACHE=$enable_ccache
   if test "x$enable_ccache" = xyes; then
-    { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+    if test "x$TOOLCHAIN_TYPE" = "xgcc" -o "x$TOOLCHAIN_TYPE" = "xclang"; then
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
-    OLD_PATH="$PATH"
+      OLD_PATH="$PATH"
-    if test "x$TOOLCHAIN_PATH" != x; then
+      if test "x$TOOLCHAIN_PATH" != x; then
-      PATH=$TOOLCHAIN_PATH:$PATH
+        PATH=$TOOLCHAIN_PATH:$PATH
-    fi
+      fi
 
 
 
@@ -50819,11 +51087,19 @@ $as_echo "$tool_specified" >&6; }
   fi
 
 
-    CCACHE_STATUS="enabled"
+      PATH="$OLD_PATH"
-    PATH="$OLD_PATH"
+      CCACHE_VERSION=`$CCACHE --version | head -n1 | $SED 's/[A-Za-z ]*//'`
+      CCACHE_STATUS="Active ($CCACHE_VERSION)"
+    else
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+      { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: ccache is not supported with toolchain type $TOOLCHAIN_TYPE" >&5
+$as_echo "$as_me: WARNING: ccache is not supported with toolchain type $TOOLCHAIN_TYPE" >&2;}
+    fi
   elif test "x$enable_ccache" = xno; then
     { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, explicitly disabled" >&5
 $as_echo "no, explicitly disabled" >&6; }
+    CCACHE_STATUS="Disabled"
   elif test "x$enable_ccache" = x; then
     { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
@@ -50854,23 +51130,17 @@ $as_echo "$as_me: WARNING: --with-ccache-dir has no meaning when ccache is not e
   if test "x$CCACHE" != x; then
 
   if test "x$CCACHE" != x; then
-    # Only use ccache if it is 3.1.4 or later, which supports
+    if test "x$USE_PRECOMPILED_HEADER" = "x1"; then
-    # precompiled headers.
+      HAS_BAD_CCACHE=`$ECHO $CCACHE_VERSION | \
-    { $as_echo "$as_me:${as_lineno-$LINENO}: checking if ccache supports precompiled headers" >&5
+          $GREP -e '^1.*' -e '^2.*' -e '^3\.0.*' -e '^3\.1\.[0123]'`
-$as_echo_n "checking if ccache supports precompiled headers... " >&6; }
+      if test "x$HAS_BAD_CCACHE" != "x"; then
-    HAS_GOOD_CCACHE=`($CCACHE --version | head -n 1 | grep -E 3.1.[456789]) 2> /dev/null`
+        as_fn_error $? "Precompiled headers requires ccache 3.1.4 or later, found $CCACHE_VERSION" "$LINENO" 5
-    if test "x$HAS_GOOD_CCACHE" = x; then
+      fi
-      { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, disabling ccache" >&5
-$as_echo "no, disabling ccache" >&6; }
-      CCACHE=
-      CCACHE_STATUS="disabled"
-    else
-      { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
       { $as_echo "$as_me:${as_lineno-$LINENO}: checking if C-compiler supports ccache precompiled headers" >&5
 $as_echo_n "checking if C-compiler supports ccache precompiled headers... " >&6; }
+      CCACHE_PRECOMP_FLAG="-fpch-preprocess"
       PUSHED_FLAGS="$CXXFLAGS"
-      CXXFLAGS="-fpch-preprocess $CXXFLAGS"
+      CXXFLAGS="$CCACHE_PRECOMP_FLAG $CXXFLAGS"
       cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
@@ -50892,19 +51162,18 @@ rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
       if test "x$CC_KNOWS_CCACHE_TRICK" = xyes; then
         { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
+        CFLAGS_CCACHE="$CCACHE_PRECOMP_FLAG"
+
+        CCACHE_SLOPPINESS=pch_defines,time_macros
       else
-        { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, disabling ccaching of precompiled headers" >&5
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no, disabling ccaching of precompiled headers" >&6; }
+$as_echo "no" >&6; }
-        CCACHE=
+        as_fn_error $? "Cannot use ccache with precompiled headers without compiler support for $CCACHE_PRECOMP_FLAG" "$LINENO" 5
-        CCACHE_STATUS="disabled"
       fi
     fi
-  fi
 
-  if test "x$CCACHE" != x; then
+    CCACHE="CCACHE_COMPRESS=1 $SET_CCACHE_DIR \
-    CCACHE_SLOPPINESS=time_macros
+        CCACHE_SLOPPINESS=$CCACHE_SLOPPINESS CCACHE_BASEDIR=$TOPDIR $CCACHE"
-    CCACHE="CCACHE_COMPRESS=1 $SET_CCACHE_DIR CCACHE_SLOPPINESS=$CCACHE_SLOPPINESS $CCACHE"
-    CCACHE_FLAGS=-fpch-preprocess
 
     if test "x$SET_CCACHE_DIR" != x; then
       mkdir -p $CCACHE_DIR > /dev/null 2>&1

common/autoconf/hotspot-spec.gmk.in

@@ -109,8 +109,8 @@ LD:=@HOTSPOT_LD@
 MT:=@HOTSPOT_MT@
 RC:=@HOTSPOT_RC@
 
-EXTRA_CFLAGS=@LEGACY_EXTRA_CFLAGS@
+EXTRA_CFLAGS=@LEGACY_EXTRA_CFLAGS@ $(CFLAGS_CCACHE)
-EXTRA_CXXFLAGS=@LEGACY_EXTRA_CXXFLAGS@
+EXTRA_CXXFLAGS=@LEGACY_EXTRA_CXXFLAGS@ $(CFLAGS_CCACHE)
 EXTRA_LDFLAGS=@LEGACY_EXTRA_LDFLAGS@
 
 USE_PRECOMPILED_HEADER=@USE_PRECOMPILED_HEADER@
@@ -132,6 +132,13 @@ else
   ZIP_DEBUGINFO_FILES:=0
 endif
 
+ifeq ($(OPENJDK_TARGET_OS), windows)
+  # On Windows, the Visual Studio toolchain needs the LIB and INCLUDE
+  # environment variables (in Windows path style).
+  export INCLUDE:=@VS_INCLUDE@
+  export LIB:=@VS_LIB@
+endif
+
 # Sneak this in via the spec.gmk file, since we don't want to mess around too much with the Hotspot make files.
 # This is needed to get the LOG setting to work properly.
 include $(SRC_ROOT)/make/common/MakeBase.gmk

common/autoconf/spec.gmk.in

@@ -129,14 +129,12 @@ LIBDL:=@LIBDL@
 # colon or semicolon
 PATH_SEP:=@PATH_SEP@
 
+# Save the original path before replacing it with the Visual Studio tools
+ORIGINAL_PATH:=@ORIGINAL_PATH@
 ifeq ($(OPENJDK_TARGET_OS), windows)
-  # On Windows, the Visual Studio toolchain needs the LIB and INCLUDE
+  # On Windows, the Visual Studio toolchain needs the PATH to be adjusted
-  # environment variables (in Windows path style), and the PATH needs to
+  # to include Visual Studio tools (this needs to be in cygwin/msys style).
-  # be adjusted to include Visual Studio tools (but this needs to be in
-  # cygwin/msys style).
   export PATH:=@VS_PATH@
-  export INCLUDE:=@VS_INCLUDE@
-  export LIB:=@VS_LIB@
 endif
 
 SYSROOT_CFLAGS := @SYSROOT_CFLAGS@
@@ -328,6 +326,8 @@ CXX_FLAG_DEPS:=@CXX_FLAG_DEPS@
 
 CFLAGS_WARNINGS_ARE_ERRORS:=@CFLAGS_WARNINGS_ARE_ERRORS@
 
+CFLAGS_CCACHE:=@CFLAGS_CCACHE@
+
 # Tools that potentially need to be cross compilation aware.
 CC:=@FIXPATH@ @CCACHE@ @CC@
 

common/autoconf/toolchain_windows.m4

@@ -213,9 +213,9 @@ AC_DEFUN([TOOLCHAIN_SETUP_VISUAL_STUDIO_ENV],
       AC_MSG_ERROR([Your VC command prompt seems broken, INCLUDE and/or LIB is missing.])
     else
       AC_MSG_RESULT([ok])
-      # Remove any trailing "\" and " " from the variables.
+      # Remove any trailing "\" ";" and " " from the variables.
-      VS_INCLUDE=`$ECHO "$VS_INCLUDE" | $SED 's/\\\\* *$//'`
+      VS_INCLUDE=`$ECHO "$VS_INCLUDE" | $SED -e 's/\\\\*;* *$//'`
-      VS_LIB=`$ECHO "$VS_LIB" | $SED 's/\\\\* *$//'`
+      VS_LIB=`$ECHO "$VS_LIB" | $SED 's/\\\\*;* *$//'`
       VCINSTALLDIR=`$ECHO "$VCINSTALLDIR" | $SED 's/\\\\* *$//'`
       WindowsSDKDir=`$ECHO "$WindowsSDKDir" | $SED 's/\\\\* *$//'`
       WINDOWSSDKDIR=`$ECHO "$WINDOWSSDKDIR" | $SED 's/\\\\* *$//'`
@@ -226,6 +226,26 @@ AC_DEFUN([TOOLCHAIN_SETUP_VISUAL_STUDIO_ENV],
       AC_SUBST(VS_PATH)
       AC_SUBST(VS_INCLUDE)
       AC_SUBST(VS_LIB)
+
+      # Convert VS_INCLUDE into SYSROOT_CFLAGS
+      OLDIFS="$IFS"
+      IFS=";"
+      for i in $VS_INCLUDE; do
+        ipath=$i
+	IFS="$OLDIFS"
+        BASIC_FIXUP_PATH([ipath])
+	IFS=";"
+      	SYSROOT_CFLAGS="$SYSROOT_CFLAGS -I$ipath"
+      done
+      # Convert VS_LIB into SYSROOT_LDFLAGS
+      for i in $VS_LIB; do
+        libpath=$i
+	IFS="$OLDIFS"
+        BASIC_FIXUP_PATH([libpath])
+	IFS=";"
+      	SYSROOT_LDFLAGS="$SYSROOT_LDFLAGS -libpath:$libpath"
+      done
+      IFS="$OLDIFS"
     fi
   else
     AC_MSG_RESULT([not found])

make/Main.gmk

@@ -212,7 +212,7 @@ $(SUPPORT_OUTPUTDIR)/source_tips: FRC
 	@$(RM) $@
 	@$(call GetSourceTips)
 
-BOOTCYCLE_TARGET := images
+BOOTCYCLE_TARGET := product-images
 bootcycle-images:
 	@$(ECHO) Boot cycle build step 2: Building a new JDK image using previously built image
 	+$(MAKE) $(MAKE_ARGS) -f Main.gmk SPEC=$(dir $(SPEC))bootcycle-spec.gmk $(BOOTCYCLE_TARGET)
@@ -443,31 +443,45 @@ $(foreach m, $(COPY_MODULES), $(eval $m: $m-copy))
 ALL_MODULE_TARGETS := $(sort $(GENSRC_MODULES) $(JAVA_MODULES) \
     $(GENDATA_MODULES) $(LIBS_MODULES) $(LAUNCHER_MODULES) $(COPY_MODULES))
 
+# The "exploded image" is a locally runnable JDK in $(BUILD_OUTPUT)/jdk.
 exploded-image: $(ALL_MODULE_TARGETS)
-# The old 'jdk' target most closely matches the new exploded-image. Keep an
-# alias for ease of use.
-jdk: exploded-image
 
-images: test-image jimages demos samples zip-security verify-modules
+# The $(BUILD_OUTPUT)/images directory contain the resulting deliverables, 
+# and in line with this, our targets for creating these are named *-image[s].
+
+# This target builds the product images, e.g. the JRE and JDK image
+# (and possibly other, more specific versions)
+product-images: jimages demos samples zip-security verify-modules
 
 ifeq ($(OPENJDK_TARGET_OS), macosx)
-  images: mac-bundles
+  product-images: mac-bundles
 endif
 
-docs: docs-javadoc docs-jvmtidoc
+# This target builds the documentation image
+docs-image: docs-javadoc docs-jvmtidoc
 
+# This target builds the test image
 test-image: prepare-test-image
 
+# all-images is the top-most target, it builds all our deliverables ("images").
+all-images: product-images test-image docs-image
+
 ALL_TARGETS += buildtools gensrc gendata copy java rmic libs launchers \
-    jdk.jdwp.agent-gensrc $(ALL_MODULE_TARGETS) exploded-image jdk images \
+    jdk.jdwp.agent-gensrc $(ALL_MODULE_TARGETS) exploded-image \
-    docs test-image
+    product-images docs-image test-image all-images
 
 ################################################################################
 
-all: images
+# Traditional targets typically run by users.
+# These can be considered aliases for the targets now named by a more
+# "modern" naming scheme.
 default: exploded-image
+jdk: exploded-image
+images: product-images
+docs: docs-image
+all: all-images
 
-ALL_TARGETS += default all
+ALL_TARGETS += default jdk images docs all
 
 ################################################################################
 ################################################################################
@@ -553,7 +567,8 @@ reconfigure:
         else
 	  @$(ECHO) "Re-running configure using default settings"
         endif
-	@( cd $(OUTPUT_ROOT) && $(BASH) $(TOPDIR)/configure $(CONFIGURE_COMMAND_LINE) )
+	@( cd $(OUTPUT_ROOT) && PATH="$(ORIGINAL_PATH)" \
+	    $(BASH) $(TOPDIR)/configure $(CONFIGURE_COMMAND_LINE) )
 
 ALL_TARGETS += reconfigure
 

make/StripBinaries.gmk

@@ -53,7 +53,7 @@ else
 endif
 
 # Don't include debug info for executables.
-ALL_CMDS_SRC := $(filter-out %.debuginfo %.diz %.map %.pdb, \
+ALL_CMDS_SRC := $(filter-out %.bc %.debuginfo %.diz %.map %.pdb, \
     $(shell $(FIND) $(SUPPORT_OUTPUTDIR)/modules_cmds -type f -o -type l))
 COPY_CMDS_SRC := $(filter %.cgi, $(ALL_CMDS_SRC))
 STRIP_CMDS_SRC := $(filter-out $(COPY_CMDS_SRC), $(ALL_CMDS_SRC))

make/common/NativeCompilation.gmk

@@ -1,5 +1,5 @@
 #
-# Copyright (c) 2011, 2014, Oracle and/or its affiliates. All rights reserved.
+# Copyright (c) 2011, 2015, Oracle and/or its affiliates. All rights reserved.
 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 #
 # This code is free software; you can redistribute it and/or modify it
@@ -53,6 +53,8 @@ else ifeq ($(OPENJDK_BUILD_OS_ENV), windows.msys)
   UNIX_PATH_PREFIX :=
 endif
 
+# This pattern is used to transform the output of the microsoft CL compiler
+# into a make syntax dependency file (.d)
 WINDOWS_SHOWINCLUDE_SED_PATTERN := \
     -e '/^Note: including file:/!d' \
     -e 's|Note: including file: *||' \
@@ -62,6 +64,16 @@ WINDOWS_SHOWINCLUDE_SED_PATTERN := \
     -e 's|$$$$| \\|g' \
     #
 
+# This pattern is used to transform a dependency file (.d) to a list
+# of make targets for dependent files (.d.targets)
+DEPENDENCY_TARGET_SED_PATTERN := \
+    -e 's/\#.*//' \
+    -e 's/^[^:]*: *//' \
+    -e 's/ *\\$$$$//' \
+    -e '/^$$$$/ d' \
+    -e 's/$$$$/ :/' \
+    #
+
 define add_native_source
   # param 1 = BUILD_MYPACKAGE
   # parma 2 = the source file name (..../alfa.c or .../beta.cpp)
@@ -75,12 +87,12 @@ define add_native_source
 
   ifneq (,$$(filter %.c,$2))
     # Compile as a C file
-    $1_$2_FLAGS=$4 $$($1_$(notdir $2)_CFLAGS) -DTHIS_FILE='"$$(<F)"' -c
+    $1_$2_FLAGS=$(CFLAGS_CCACHE) $4 $$($1_$(notdir $2)_CFLAGS) -DTHIS_FILE='"$$(<F)"' -c
     $1_$2_COMP=$5
     $1_$2_DEP_FLAG:=$(C_FLAG_DEPS)
   else ifneq (,$$(filter %.m,$2))
     # Compile as a objective-c file
-    $1_$2_FLAGS=-x objective-c $4 $$($1_$(notdir $2)_CFLAGS) -DTHIS_FILE='"$$(<F)"' -c
+    $1_$2_FLAGS=-x objective-c $(CFLAGS_CCACHE) $4 $$($1_$(notdir $2)_CFLAGS) -DTHIS_FILE='"$$(<F)"' -c
     $1_$2_COMP=$8
     $1_$2_DEP_FLAG:=$(C_FLAG_DEPS)
   else ifneq (,$$(filter %.s,$2))
@@ -90,7 +102,7 @@ define add_native_source
     $1_$2_DEP_FLAG:=
   else ifneq (,$$(filter %.cpp,$2)$$(filter %.mm,$2))
     # Compile as a C++ file
-    $1_$2_FLAGS=$6 $$($1_$(notdir $2)_CXXFLAGS) -DTHIS_FILE='"$$(<F)"' -c
+    $1_$2_FLAGS=$(CFLAGS_CCACHE) $6 $$($1_$(notdir $2)_CXXFLAGS) -DTHIS_FILE='"$$(<F)"' -c
     $1_$2_COMP=$7
     $1_$2_DEP_FLAG:=$(CXX_FLAG_DEPS)
   else
@@ -105,8 +117,13 @@ define add_native_source
     ifeq (,$$(filter %.s,$2))
       # And this is the dependency file for this obj file.
       $1_$2_DEP:=$$(patsubst %$(OBJ_SUFFIX),%.d,$$($1_$2_OBJ))
+      # The dependency target file lists all dependencies as empty targets
+      # to avoid make error "No rule to make target" for removed files
+      $1_$2_DEP_TARGETS:=$$(patsubst %$(OBJ_SUFFIX),%.d.targets,$$($1_$2_OBJ))
+
       # Include previously generated dependency information. (if it exists)
       -include $$($1_$2_DEP)
+      -include $$($1_$2_DEP_TARGETS)
 
       ifeq ($(TOOLCHAIN_TYPE), microsoft)
         $1_$2_DEBUG_OUT_FLAGS:=-Fd$$(patsubst %$(OBJ_SUFFIX),%.pdb,$$($1_$2_OBJ)) \
@@ -139,6 +156,11 @@ define add_native_source
 	  ($(ECHO) $$@: \\ \
 	  && $(SED) $(WINDOWS_SHOWINCLUDE_SED_PATTERN) $$($1_$2_DEP).raw) > $$($1_$2_DEP)
         endif
+        # Create a dependency target file from the dependency file.
+        # Solution suggested by http://make.mad-scientist.net/papers/advanced-auto-dependency-generation/
+        ifneq ($$($1_$2_DEP),)
+	  $(SED) $(DEPENDENCY_TARGET_SED_PATTERN) $$($1_$2_DEP) > $$($1_$2_DEP_TARGETS)
+        endif
   endif
 endef
 
@@ -428,7 +450,7 @@ define SetupNativeCompilationInner
   $1_BUILD_INFO := $$($1_OBJECT_DIR)/_build-info.marker
 
   # Track variable changes for all variables that affect the compilation command
-  # lines for all object files in this setup. This includes at least all the 
+  # lines for all object files in this setup. This includes at least all the
   # variables used in the call to add_native_source below.
   $1_COMPILE_VARDEPS := $$($1_CFLAGS) $$($1_EXTRA_CFLAGS) $(SYSROOT_CFLAGS) \
       $$($1_CXXFLAGS) $$($1_EXTRA_CXXFLAGS) \
@@ -452,7 +474,10 @@ define SetupNativeCompilationInner
         ifeq ($$(wildcard $$($1_TARGET)),)
 	  $(ECHO) 'Creating $$($1_BASENAME) from $$(words $$(filter-out %.vardeps, $$?)) file(s)'
         else
-	  $(ECHO) 'Updating $$($1_BASENAME) from $$(words $$(filter-out %.vardeps, $$?)) file(s)'
+	  $(ECHO) $$(strip 'Updating $$($1_BASENAME)' \
+	      $$(if $$(filter-out %.vardeps, $$?), \
+	        'from $$(words $$(filter-out %.vardeps, $$?)) file(s)') \
+	      $$(if $$(filter %.vardeps, $$?), 'due to makefile changes'))
         endif
 	$(TOUCH) $$@
 
@@ -461,7 +486,9 @@ define SetupNativeCompilationInner
     ifneq (,$$($1_VERSIONINFO_RESOURCE))
       $1_RES:=$$($1_OBJECT_DIR)/$$($1_BASENAME).res
       $1_RES_DEP:=$$($1_RES).d
+      $1_RES_DEP_TARGETS:=$$($1_RES).d.targets
       -include $$($1_RES_DEP)
+      -include $$($1_RES_DEP_TARGETS)
 
       $1_RES_VARDEPS := $(RC) $$($1_RC_FLAGS)
       $1_RES_VARDEPS_FILE := $$(call DependOnVariable, $1_RES_VARDEPS, \
@@ -469,12 +496,14 @@ define SetupNativeCompilationInner
 
       $$($1_RES): $$($1_VERSIONINFO_RESOURCE) $$($1_RES_VARDEPS_FILE)
 		$(ECHO) $(LOG_INFO) "Compiling resource $$(notdir $$($1_VERSIONINFO_RESOURCE)) (for $$(notdir $$($1_TARGET)))"
-		$(RC) $$($1_RC_FLAGS) $(CC_OUT_OPTION)$$@ $$($1_VERSIONINFO_RESOURCE)
+		$(RC) $$($1_RC_FLAGS) $(SYSROOT_CFLAGS) $(CC_OUT_OPTION)$$@ \
+		    $$($1_VERSIONINFO_RESOURCE)
                 # Windows RC compiler does not support -showIncludes, so we mis-use CL for this.
-		$(CC) $$($1_RC_FLAGS) -showIncludes -nologo -TC \
+		$(CC) $$($1_RC_FLAGS) $(SYSROOT_CFLAGS) -showIncludes -nologo -TC \
 		    $(CC_OUT_OPTION)$$($1_RES_DEP).obj $$($1_VERSIONINFO_RESOURCE) > $$($1_RES_DEP).raw 2>&1 || exit 0
 		($(ECHO) $$($1_RES): \\ \
 		&& $(SED) $(WINDOWS_SHOWINCLUDE_SED_PATTERN) $$($1_RES_DEP).raw) > $$($1_RES_DEP)
+		$(SED) $(DEPENDENCY_TARGET_SED_PATTERN) $$($1_RES_DEP) > $$($1_RES_DEP_TARGETS)
     endif
     ifneq (,$$($1_MANIFEST))
       $1_GEN_MANIFEST:=$$($1_OBJECT_DIR)/$$($1_PROGRAM).manifest