This makes logging of state changes easier - state transitions are now logged
at DEBUG1. Without that logging it was surprisingly hard to understand the
current state of the system while debugging.
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/kgng5nrvnlv335evmsuvpnh354rw7qyazl73kdysev2cr2v5zu@m3cfzxicm5kp
cluster_rel() receives the OID of the relation to process, which it
opens and locks; but then its subroutine copy_table_data() also receives
the relation OID and opens it by itself. This is a bit wasteful. It's
better to have cluster_rel() receive the relation already open, and pass
it down to its subroutines as necessary; then cluster_rel closes the rel
before returning. This simplifies things.
But a better motivation to make this change is that a future command to
do logical-decoding-based "concurrent VACUUM FULL" will need to release
all locks on the relation (and possibly on the clustering index) at some
point. Since it makes little sense to keep the relation reference
without the lock, the cluster_rel() function will also close it (and
the index). With this arrangement, neither the function nor its
subroutines need open extra references, which, again, makes things simpler.
Author: Antonin Houska <ah@cybertec.at>
Discussion: https://postgr.es/m/82651.1720540558@antos
66c0185a3 gave the planner the ability to have union child queries
provide the union planner with pre-sorted input so that UNION queries
could be more efficiently implemented using Merge Append.
That commit overlooked checking that the UNION target list and the union
child target list's types all match. In some corner cases, this could
result in the planner producing sorts using the sort operator of the
top-level UNION's target list type rather than of the union child's
target list's type. The implications of this range from silently
working correctly, despite using the wrong sort operator all the way up
to a segmentation fault.
Here we fix by adjusting the planner so it makes no attempt to have the
subquery produce pre-sorted results when the data type of the UNION
target list and the types from the subquery target list don't match
exactly.
Backpatch to 17, where 66c0185a3 was introduced.
Reported-by: Jason Smith <dqetool@126.com>
Diagnosed-by: Tom Lane <tgl@sss.pgh.pa.us>
Bug: 18764
Discussion: https://postgr.es/m/18764-63ad667ea26e877a%40postgresql.org
Backpatch-through: 17
The pgstat_count_io_op() function, which counts a single I/O operation,
wraps pgstat_count_io_op_n() with a counter value of 1. The latter is
declared in pgstat.h and used nowhere in the code, so let's remove it in
favor of the former.
This change makes also the code more symmetric with
pgstat_count_io_op_time(), that already uses a similar set of arguments,
except that it counts also the I/O time. This will ease a bit the
integration of a follow-up patch that adds byte-level tracking in
pg_stat_io for some of its attributes, lifting the current restriction
based on BLCKSZ as all I/O operations are assumed to be block-based.
Author: Nazir Bilal Yavuz
Reviewed-by: Bertrand Drouvot
Discussion: https://postgr.es/m/CAN55FZ32ze812=yjyZg1QeXhKvACUM_Nu0_gyPQcUKKuVHL5xA@mail.gmail.com
This commit changes the way pending backend statistics are tracked by
moving them into a new structure called PgStat_BackendPending, removing
PgStat_BackendPendingIO. PgStat_BackendPending currently only includes
PgStat_PendingIO for the pending I/O stats.
pgstat_flush_backend() is extended with a "flags" argument to control
which parts of the stats of a backend should be flushed.
With this refactoring, it becomes easier to plug into backend statistics
more data. A patch to add information related to WAL in this stats kind
is under discussion.
Author: Bertrand Drouvot
Discussion: https://postgr.es/m/Z3zqc4o09dM/Ezyz@ip-10-97-1-34.eu-west-3.compute.internal
This error message stated the privileges required to add a member
to a group even if the user was trying to drop a member:
postgres=> alter group a drop user b;
ERROR: permission denied to alter role
DETAIL: Only roles with the ADMIN option on role "a" may add members.
Since the required privileges for both operations are the same, we
can fix this by modifying the message to mention both adding and
dropping members:
postgres=> alter group a drop user b;
ERROR: permission denied to alter role
DETAIL: Only roles with the ADMIN option on role "a" may add or drop members.
Author: ChangAo Chen
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/tencent_FAA0D00E3514AAF0BBB6322542A6094FEF05%40qq.com
Backpatch-through: 16
Harden hstore_plperl, hstore_plpython, and ltree_plpython
against search-path-based attacks by using @extschema:name@
notation to refer to the underlying hstore or ltree data type.
This allows removal of the previous documentation warning
suggesting that they must be installed in the same schema as
the underlying data type. In passing, also improve a para in
extend.sgml to suggest using @extschema:name@ for such purposes.
Discussion: https://postgr.es/m/692480.1736021695@sss.pgh.pa.us
This function doesn't need the lockmode to be passed: it was being used
to lock the new heap, but that's bogus, because the only caller has
already obtained the appropriate lock on the new heap (which is
unimportant anyway, because the relation's creation is not yet committed
and so no other session can see it).
Noticed while reviewed Antonin Houska's patch to add VACUUM FULL
CONCURRENTLY.
The synchronous_standby_names GUC allows specifying num_sync,
the number of synchronous standbys transactions must wait for
replies from. This value must be an integer greater than zero.
This commit updates the documentation to clarify this requirement.
Reported-by: Asphator <asphator@gmail.com>
Discussion: https://postgr.es/m/18663-b02f75cb919f1b60@postgresql.org
The originally submitted code (using bit masking) was correct when the
number of slots was restricted to be a power of two -- but that
limitation was removed during development that led to commit
53c2a97a9266, which made the bank selection code incorrect. This led to
always using a smaller number of banks than available. Change said code
to use integer modulo instead, which works correctly with an arbitrary
number of banks.
It's likely that we could improve on this to avoid runtime use of
integer division. But with this change we're, at least, not wasting
memory on unused banks, and more banks mean less contention, which is
likely to have a much higher performance impact than a single
instruction's latency.
Author: Yura Sokolov <y.sokolov@postgrespro.ru>
Reviewed-by: Andrey Borodin <x4mmm@yandex-team.ru>
Discussion: https://postgr.es/m/9444dc46-ca47-43ed-9058-89c456316306@postgrespro.ru
walmethods.c used off_t to navigate around a pg_wal.tar file that could
exceed 2GB, which doesn't work on Windows and would fail with misleading
errors. Use pgoff_t instead.
Back-patch to all supported branches.
Author: Davinder Singh <davinder.singh@enterprisedb.com>
Reported-by: Jakub Wartak <jakub.wartak@enterprisedb.com>
Discussion: https://postgr.es/m/CAKZiRmyM4YnokK6Oenw5JKwAQ3rhP0YTz2T-tiw5dAQjGRXE3Q%40mail.gmail.com
Change our ftruncate() macro to use the 64-bit variant of chsize(), and
add a new macro to redirect lseek() to _lseeki64().
Back-patch to all supported releases, in preparation for a bug fix.
Tested-by: Davinder Singh <davinder.singh@enterprisedb.com>
Discussion: https://postgr.es/m/CAKZiRmyM4YnokK6Oenw5JKwAQ3rhP0YTz2T-tiw5dAQjGRXE3Q%40mail.gmail.com
A named tuplestore is necessarily a transient object, so it makes
no sense to reference one in a persistent object such as a view.
We didn't previously prevent that, with the result that if you
tried you would get some weird failure about how the executor
couldn't find the tuplestore.
We can mechanize a check for this case cheaply by making dependency
extraction complain if it comes across such an RTE. This is a
plausible way of dealing with it since part of the problem is that we
have no way to make a pg_depend representation of a named tuplestore.
Report and fix by Yugo Nagata. Although this is an old problem,
it's a very weird corner case and there have been no reports from
end users. So it seems sufficient to fix it in master.
Discussion: https://postgr.es/m/20240726160714.e74d0db579f2c017e1ca0b7e@sraoss.co.jp
The plpgsql scanner is a wrapper around the core scanner, which
already uses the flex %option reentrant. This patch only pushes up a
few levels the place where the scanner handle is allocated. Before,
it was allocated in pl_scanner.c in a global variable, so to the
outside the scanner was not reentrant. Now, it is allocated in
pl_comp.c and is passed as an argument to yyparse(), similar to how it
is handled in other reentrant scanners.
Also use flex yyextra to handle context information, instead of global
variables. Again, this uses the existing yyextra support in the core
scanner. This complements the other changes to make the scanner
reentrant.
The bison option %pure-parser is used to make the generated parser
pure. This happens in the usual way, since plpgsql has its own bison
parser definition.
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://www.postgresql.org/message-id/flat/eb6faeac-2a8a-4b69-9189-c33c520e5b7b@eisentraut.org
This function called generate_series() without enforcing its input
argument types, making possible for an attacker to catch this call, by
defining for example a generate_series(int,bigint).
The internals of pg_freespace(regclass) are changed to force the use of
bigint for the inputs of generate_series(). A more consistent style is
applied for all its hardcoded values, while on it.
Issue introduced in 3f323eba89fb.
Reported-by: Noah Misch
Reviewed-by: Noah Misch
Discussion: https://postgr.es/m/20250106190428.ec.nmisch@google.com
This new parameter can be used to change the minimum allowed
password length (in bytes). Note that it has no effect if a user
supplies a pre-encrypted password.
Author: Emanuele Musella, Maurizio Boriani
Reviewed-by: Tomas Vondra, Bertrand Drouvot, Japin Li
Discussion: https://postgr.es/m/CA%2BugDNyYtHOtWCqVD3YkSVYDWD_1fO8Jm_ahsDGA5dXhbDPwrQ%40mail.gmail.com
Commit c758119e5b increased the default number of semaphores
required for autovacuum workers from 3 to 16. Unfortunately, some
systems have very low default settings for SEMMNS, and this change
moved the minimum required for Postgres well beyond that limit (see
commit 38da053463 for more details).
With this commit, initdb will lower the default value for
autovacuum_worker_slots as needed, just like it already does for
parameters such as max_connections and shared_buffers. We test
for (max_connections / 6) slots, which conveniently has the
following properties:
* For the initial max_connections default of 100, the default of
autovacuum_worker_slots will be 16, which is its initial default
value specified in the documentation and in guc_tables.c.
* For the lowest possible max_connections default of 25, the
default of autovacuum_worker_slots will be 4, which means we only
need one additional semaphore for autovacuum workers (as compared
to before commit c758119e5b). This leaves some wiggle room for
new auxiliary workers, etc. on systems with low SEMMNS, and it
ensures that the default number of slots will be greater than or
equal to the default value of autovacuum_max_workers (3).
Reported-by: Tom Lane
Suggested-by: Andres Freund
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/1346002.1736198977%40sss.pgh.pa.us
Commit 14e87ffa5c54 needlessly added support for CONSTR_NOTNULL entries
to StoreConstraints. It's dead code, so remove it.
To make the situation regarding constraint creation clearer, change
comments in heap_create_with_catalog, StoreConstraints, MergeAttributes
to explain which types of constraint are used on each.
Author: 何建 (Jian He) <jian.universality@gmail.com>
Discussion: https://postgr.es/m/CACJufxFxzqrCiUNfjJ0tQU+=nKQkQCGtGzUBude=SMOwj5VNjQ@mail.gmail.com
Move nbtree's detection of RowCompare quals that are unsatisfiable due
to having a NULL in their first row element: rather than detecting these
cases at the point where _bt_first builds its insertion scan key, do so
earlier, during preprocessing proper. This brings the RowCompare case
in line every other case involving an unsatisfiable-due-to-NULL qual.
nbtree now consistently detects such unsatisfiable quals -- even when
they happen to involve a key that isn't examined by _bt_first at all.
Affected cases thereby avoid useless full index scans that cannot
possibly return any matching rows.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/CAH2-WzmySVXst2hFrOATC-zw1Byg1XC-jYUS314=mzuqsNwk+Q@mail.gmail.com
This new structure relieves _bt_first from having separate calls to
_bt_start_array_keys for the serial case and parallel case. This saves
code, and seems clearer.
Follow-up to work from commits 4e6e375b and b5ee4e52.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wz=XjUZjBjHJdhTvuH5MwoJObWGoM2RG2LyFg5WUdWyk=A@mail.gmail.com
The parameter 'rel' in lookup_var_attr_stats was once used to draw an
ERROR when ANALYZE failed to acquire sufficient data to build extended
statistics. bf2a691e0 changed the logic to raise a WARNING in the
caller instead. As a result, this parameter is no longer needed and
can be removed. Since this is a static function, we can always easily
reintroduce the parameter if it's ever needed in the future.
Author: Ilia Evdokimov
Reviewed-by: Fabrízio de Royes Mello
Discussion: https://postgr.es/m/b3880f22-5808-4206-88d4-1553a81c3440@tantorlabs.com
This commit introduces a new parameter named
autovacuum_worker_slots that controls how many autovacuum worker
slots to reserve during server startup. Modifying this new
parameter's value does require a server restart, but it should
typically be set to the upper bound of what you might realistically
need to set autovacuum_max_workers. With that new parameter in
place, autovacuum_max_workers can now be changed with a SIGHUP
(e.g., pg_ctl reload).
If autovacuum_max_workers is set higher than
autovacuum_worker_slots, a WARNING is emitted, and the server will
only start up to autovacuum_worker_slots workers at a given time.
If autovacuum_max_workers is set to a value less than the number of
currently-running autovacuum workers, the existing workers will
continue running, but no new workers will be started until the
number of running autovacuum workers drops below
autovacuum_max_workers.
Reviewed-by: Sami Imseih, Justin Pryzby, Robert Haas, Andres Freund, Yogesh Sharma
Discussion: https://postgr.es/m/20240410212344.GA1824549%40nathanxps13
VERBOSE messages from ANALYZE, CLUSTER, REINDEX, and VACUUM are logged
at the INFO level, but this detail was missing from the documentation.
This commit updates the docs to mention the log level for these messages.
Author: Masahiro Ikeda
Reviewed-by: Yugo Nagata
Discussion: https://postgr.es/m/b4a4b7916982dccd9607c8efb3ce5116@oss.nttdata.com
Previously, it would not have worked for a caller to pass a slab
context, since it would have been used for other things which likely
had incompatible size. In an attempt to be helpful and avoid possible
space wastage due to aset's power-of-two rounding, RT_CREATE would
create an additional slab context if the value type was fixed-length
and larger than pointer size. The problem was, we have since added
the bump context type, and the generation context was a possibility as
well, so silently overriding the caller's choice may actually be worse.
Commit e8a6f1f908d arranged so that the caller-provided context is
used only for leaves, so it's safe for the caller to use slab here
if they wish. As demonstration, use slab in one of the radix tree
regression tests.
Reviewed by Masahiko Sawada
Discussion: https://postgr.es/m/CANWCAZZDCo4k5oURg_pPxM6+WZ1oiG=sqgjmQiELuyP0Vtrwig@mail.gmail.com
Previously, this was notionally used only for the entry point of the
tree and as a convenient parent for other contexts.
For shared memory, the creator previously allocated the entry point
in this context, but attaching backends didn't have access to that,
so they just used the caller's context. For the sake of consistency,
allocate every instance of an entry point in the caller's context.
For local memory, allocate the control object in the caller's context
as well. This commit also makes the "leaf context" the notional parent
of the child contexts used for nodes, so it's a bit of a misnomer,
but a future commit will make the node contexts independent rather
than children, so leave it this way for now to avoid code churn.
The memory context parameter for RT_CREATE is now unused in the case
of shared memory, so remove it and adjust callers to match.
In passing, remove unused "context" member from struct TidStore,
which seems to have been an oversight.
Reviewed by Masahiko Sawada
Discussion: https://postgr.es/m/CANWCAZZDCo4k5oURg_pPxM6+WZ1oiG=sqgjmQiELuyP0Vtrwig@mail.gmail.com
Typically only one iterator is present at any time, so it's overkill
to devote an entire context for this. Get rid of it and use the
caller's context.
This is tidy-up work, so no backpatch in this form. However, a
hypothetical extension to v17 that tried to start iteration from
an attaching backend would result in a crash, so that'll be fixed
separately in a way that doesn't change behavior in core.
Patch by me, reported and reviewed by Masahiko Sawada
Discussion: https://postgr.es/m/CAD21AoBB2U47V=F+wQRB1bERov_of5=BOZGaybjaV8FLQyqG3Q@mail.gmail.com
Slightly faulty logic in the original jsonb code (commit d9134d0a355)
results in an empty top level array sorting less than a json null. We
can't change the sort order now since it would affect btree indexes over
jsonb, so document the anomaly.
Backpatch to all live branches (13 .. 17)
In master, also add a code comment noting the anomaly.
Reported-by: Yan Chengpen
Reviewed-by: Jian He
Discussion: https://postgr.es/m/OSBPR01MB45199DD8DA2D1CECD50518188E272@OSBPR01MB4519.jpnprd01.prod.outlook.com
When looking up statistical data about an expression, we do not need
to concern ourselves with the outer joins that could null the
Vars/PHVs contained in the expression. Accounting for nullingrels in
the expression could cause estimate_num_groups to count the same Var
multiple times if it's marked with different nullingrels. This is
incorrect, and could lead to "ERROR: corrupt MVNDistinct entry" when
searching for multivariate n-distinct.
Furthermore, the nullingrels could prevent us from matching an
expression to expressional index columns or to the expressions in
extended statistics, leading to inaccurate estimates.
To fix, strip out all the nullingrels from the expression before we
look up statistical data about it. There is one ensuing plan change
in the regression tests, but it looks reasonable and does not
compromise its original purpose.
This patch could result in plan changes, but it fixes an actual bug,
so back-patch to v16 where the outer-join-aware-Var infrastructure was
introduced.
Author: Richard Guo
Discussion: https://postgr.es/m/CAMbWs4-2Z4k+nFTiZe0Qbu5n8juUWenDAtMzi98bAZQtwHx0-w@mail.gmail.com
CHUNKHDRSZ was defined as 16 bytes, which was true when that code went in,
but since c6e0fe1f2, 8 is a more accurate value. Here we adjust it to use
sizeof(MemoryChunk), which is normally 8, or 16 for cassert builds.
c6e0fe1f2 first appeared in v16, so this is technically wrong in v16 up
to master, but let's apply this only to master as adjusting this does
influence the estimated number of batches in the aggregate costing code
and we don't want to cause plan instability in released versions.
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/CAApHDvpMpRQvsTqZo3FinXkgytwxwF8sCyZm83xDj-1s_hLe+w@mail.gmail.com
As coded, the module was not using pending entries to store its data
locally before doing a flush to the central dshash with a timed
pgstat_report_stat() call. Hence, the flush callback was defined, but
finished by being not used. As a template, this is more efficient than
the original logic of updating directly the shared memory entries as
this reduces the interactions that need to be done with the pgstats
hash table in shared memory.
injection_stats_flush_cb() was also missing a pgstat_unlock_entry(), so
add one, while on it.
Reviewed-by: Bertrand Drouvot
Discussion: https://postgr.es/m/Z3JbLhKFFm6kKfT8@ip-10-97-1-34.eu-west-3.compute.internal
pgoutput caches the attribute map of a relation, that is free()'d only
when validating a RelationSyncEntry. However, this code path is not
taken when calling any of the SQL functions able to do some logical
decoding, like pg_logical_slot_{get,peek}_changes(), leaking some memory
into CacheMemoryContext on repeated calls.
To address this, a relation's attribute map is allocated in
PGOutputData's cachectx, free()'d at the end of the execution of these
SQL functions when logical decoding ends. This is available down to 15.
v13 and v14 have a similar leak, which will be dealt with later.
Reported-by: Masahiko Sawada
Author: Vignesh C
Reviewed-by: Hou Zhijie
Discussion: https://postgr.es/m/CAD21AoDkAhQVSukOfH3_reuF-j4EU0-HxMqU3dU+bSTxsqT14Q@mail.gmail.com
Discussion: https://postgr.es/m/CALDaNm1hewNAsZ_e6FF52a=9drmkRJxtEPrzCB6-9mkJyeBBqA@mail.gmail.com
Backpatch-through: 15
