normal a55abcc0ca zlib: reduce garbage on gzip writes (deflate)
Zlib::GzipWriter generated large amounts of garbage from
(struct zstream).input.  Reuse the .input field when it is
hidden, and recycle it when its lifetime is over.  This change
alone reduced memory usage of the writer from 90MB to 4.5MB.

For the detached buffer of compressed data used by
gzfile_write_raw, we can only clear the string (not recycle it)
since user code may hold references to it (but the data would be
clobbered, anyways).  This reduced memory usage slightly by
around 0.5MB (because it's smaller compressed data).

Combined, these changes reduce the anonymous RSS memory of a
dedicated writer process from over 90MB to under 4MB.

before:

    #      user     system      total        real

    writer   7.823332   0.053333   7.876665 (  7.881464)
    writer RssAnon:    92944 kB
    reader   6.969999   0.076666   7.046665 (  7.906377)
    reader RssAnon:   109820 kB

after:

    writer   7.359999   0.000000   7.359999 (  7.360639)
    writer RssAnon:     4040 kB
    reader   6.346667   0.070000   6.416667 (  7.387654)
    reader RssAnon:    98272 kB

Script used:
-------
require 'zlib'
require 'benchmark'
nr = 16384 * 2

def stats(pfx, bm)
  str = "#{bm}#{File.readlines("/proc/#$$/status").grep(/^RssAnon:/)[0]}"
  puts str.gsub!(/^/m, pfx)
end

rd, wr = IO.pipe
pid = fork do
  buf = ((0..255).map(&:chr).join * 128).freeze
  rd.close
  gzip = Zlib::GzipWriter.new(wr)
  bm = Benchmark.measure do
    nr.times { gzip.write(buf) }
    gzip.close
    wr.close
  end
  stats('writer ', bm)
end

wr.close
buf = ''
gunzip = Zlib::GzipReader.new(rd)
n = 0
bm = Benchmark.measure do
  begin
    gunzip.readpartial(16384, buf)
    n += buf.size
  rescue EOFError
    break
  end while true
end
stats('reader ', bm)
Process.waitall
-------
* ext/zlib/zlib.c (zstream_discard_input): reuse or recycle hidden input
  (zstream_reset_input): clear hidden input
  (zstream_run): detach input and recycle after use
  (gzfile_write_raw): clear buffer after write
  [ruby-core:84638] [Feature #14315]

git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61631 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
2018-01-05 20:48:55 +00:00
2017-12-22 23:08:05 +00:00
2017-12-22 23:08:05 +00:00
2017-12-15 14:42:43 +00:00
2018-01-02 06:41:53 +00:00
2017-12-18 16:17:17 +00:00
2017-12-12 15:02:51 +00:00
2017-11-18 06:24:52 +00:00
2017-11-12 15:25:56 +00:00
2017-12-18 16:17:17 +00:00
2017-12-22 23:08:05 +00:00
2017-12-27 14:07:49 +00:00
2018-01-02 06:41:40 +00:00
2018-01-03 09:19:11 +00:00
2017-12-22 01:03:17 +00:00
2017-12-22 01:03:17 +00:00
2017-12-31 13:15:52 +00:00
2018-01-02 06:42:03 +00:00
2017-12-06 22:43:54 +00:00
2017-12-22 03:35:52 +00:00
2018-01-02 15:29:58 +00:00
GPL
2017-12-30 00:00:23 +00:00
2018-01-05 17:51:10 +00:00
2018-01-05 08:59:23 +00:00
2017-12-22 23:08:05 +00:00
2017-12-15 14:42:43 +00:00
2017-12-08 05:51:19 +00:00
2018-01-02 06:41:50 +00:00
2017-12-25 03:25:45 +00:00
2017-11-07 08:19:25 +00:00
2018-01-02 06:41:40 +00:00
2018-01-04 07:51:16 +00:00
2017-12-13 02:43:38 +00:00
2018-01-02 06:41:54 +00:00
2018-01-02 06:41:53 +00:00
2017-12-30 00:00:23 +00:00
2018-01-04 07:51:17 +00:00
2017-12-19 10:46:51 +00:00
2018-01-02 06:41:50 +00:00
2018-01-02 06:41:50 +00:00
2018-01-04 07:51:18 +00:00
2018-01-05 15:16:43 +00:00
2018-01-03 01:43:17 +00:00
2018-01-02 06:41:54 +00:00
2017-12-11 19:17:25 +00:00
2018-01-05 08:59:23 +00:00

Build Status Build status

What's Ruby

Ruby is the interpreted scripting language for quick and easy object-oriented programming. It has many features to process text files and to do system management tasks (as in Perl). It is simple, straight-forward, and extensible.

Features of Ruby

  • Simple Syntax
  • Normal Object-oriented Features (e.g. class, method calls)
  • Advanced Object-oriented Features (e.g. mix-in, singleton-method)
  • Operator Overloading
  • Exception Handling
  • Iterators and Closures
  • Garbage Collection
  • Dynamic Loading of Object Files (on some architectures)
  • Highly Portable (works on many Unix-like/POSIX compatible platforms as well as Windows, macOS, Haiku, etc.) cf. https://bugs.ruby-lang.org/projects/ruby-trunk/wiki/SupportedPlatforms

How to get Ruby

For a complete list of ways to install Ruby, including using third-party tools like rvm, see:

https://www.ruby-lang.org/en/downloads/

The Ruby distribution files can be found on the following FTP site:

ftp://ftp.ruby-lang.org/pub/ruby/

The trunk of the Ruby source tree can be checked out with the following command:

$ svn co https://svn.ruby-lang.org/repos/ruby/trunk/ ruby

Or if you are using git then use the following command:

$ git clone https://github.com/ruby/ruby.git

There are some other branches under development. Try the following command to see the list of branches:

$ svn ls https://svn.ruby-lang.org/repos/ruby/branches/

Or if you are using git then use the following command:

$ git ls-remote git://github.com/ruby/ruby.git

Ruby home page

The URL of the Ruby home page is:

https://www.ruby-lang.org/

Mailing list

There is a mailing list to talk about Ruby. To subscribe to this list, please send the following phrase:

subscribe

in the mail body (not subject) to the address mailto:ruby-talk-request@ruby-lang.org.

How to compile and install

This is what you need to do to compile and install Ruby:

  1. If you want to use Microsoft Visual C++ to compile Ruby, read win32/README.win32 instead of this document.

  2. If ./configure does not exist or is older than configure.ac, run autoconf to (re)generate configure.

  3. Run ./configure, which will generate config.h and Makefile.

    Some C compiler flags may be added by default depending on your environment. Specify optflags=.. and warnflags=.. as necessary to override them.

  4. Edit defines.h if you need. Usually this step will not be needed.

  5. Remove comment mark(#) before the module names from ext/Setup (or add module names if not present), if you want to link modules statically.

    If you don't want to compile non static extension modules (probably on architectures which do not allow dynamic loading), remove comment mark from the line "#option nodynamic" in ext/Setup.

    Usually this step will not be needed.

  6. Run make.

    • On Mac, set RUBY_CODESIGN environment variable with a signing identity. It uses the identity to sign ruby binary. See also codesign(1).
  7. Optionally, run 'make check' to check whether the compiled Ruby interpreter works well. If you see the message "check succeeded", your Ruby works as it should (hopefully).

  8. Optionally, run make update-gems and make extract-gems.

    If you want to install bundled gems, run make update-gems and make extract-gems before running make install.

  9. Run 'make install'.

    This command will create the following directories and install files into them.

    • ${DESTDIR}${prefix}/bin
    • ${DESTDIR}${prefix}/include/ruby-${MAJOR}.${MINOR}.${TEENY}
    • ${DESTDIR}${prefix}/include/ruby-${MAJOR}.${MINOR}.${TEENY}/${PLATFORM}
    • ${DESTDIR}${prefix}/lib
    • ${DESTDIR}${prefix}/lib/ruby
    • ${DESTDIR}${prefix}/lib/ruby/${MAJOR}.${MINOR}.${TEENY}
    • ${DESTDIR}${prefix}/lib/ruby/${MAJOR}.${MINOR}.${TEENY}/${PLATFORM}
    • ${DESTDIR}${prefix}/lib/ruby/site_ruby
    • ${DESTDIR}${prefix}/lib/ruby/site_ruby/${MAJOR}.${MINOR}.${TEENY}
    • ${DESTDIR}${prefix}/lib/ruby/site_ruby/${MAJOR}.${MINOR}.${TEENY}/${PLATFORM}
    • ${DESTDIR}${prefix}/lib/ruby/vendor_ruby
    • ${DESTDIR}${prefix}/lib/ruby/vendor_ruby/${MAJOR}.${MINOR}.${TEENY}
    • ${DESTDIR}${prefix}/lib/ruby/vendor_ruby/${MAJOR}.${MINOR}.${TEENY}/${PLATFORM}
    • ${DESTDIR}${prefix}/lib/ruby/gems/${MAJOR}.${MINOR}.${TEENY}
    • ${DESTDIR}${prefix}/share/man/man1
    • ${DESTDIR}${prefix}/share/ri/${MAJOR}.${MINOR}.${TEENY}/system

    If Ruby's API version is 'x.y.z', the ${MAJOR} is 'x', the ${MINOR} is 'y', and the ${TEENY} is 'z'.

    NOTE: teeny of the API version may be different from one of Ruby's program version

    You may have to be a super user to install Ruby.

If you fail to compile Ruby, please send the detailed error report with the error log and machine/OS type, to help others.

Some extension libraries may not get compiled because of lack of necessary external libraries and/or headers, then you will need to run 'make distclean-ext' to remove old configuration after installing them in such case.

Copying

See the file COPYING.

Feedback

Questions about the Ruby language can be asked on the Ruby-Talk mailing list (https://www.ruby-lang.org/en/community/mailing-lists) or on websites like (https://stackoverflow.com).

Bug reports should be filed at https://bugs.ruby-lang.org. Read HowToReport for more information.

Contributing

See the file CONTRIBUTING.md

The Author

Ruby was originally designed and developed by Yukihiro Matsumoto (Matz) in 1995.

mailto:matz@ruby-lang.org

Description
Languages
Ruby 58.9%
C 29.7%
Rust 4%
C++ 3%
Makefile 2.1%
Other 2.2%