Add an explicit capture_cb_capture_failed indication for the case where

we weren't even able to start a capture, rather than delivering a fake
"capture start" indication and relying on a later "capture file closed"
indication - for a capture that was never opened in the first place - to
handle GUI cleanups.

Don't deliver any GUI indications in cf_close() if we didn't have a
capture file open in the first place.

Clear the status bar and welcome header if that indication is delivered.

If we start a capture from the command line with the -k flag, don't show
the captured packet information unless the capture actually starts.

svn path=/trunk/; revision=41521

capture.c

@@ -549,75 +549,73 @@ capture_input_closed(capture_options *capture_opts, gchar *msg)
   if (msg != NULL)
     simple_dialog(ESD_TYPE_ERROR, ESD_BTN_OK, "%s", msg);
 
-  /* if we didn't start the capture, do a fake start. */
-  /* (happens if we got an error message - we won't get a filename then). */
   if(capture_opts->state == CAPTURE_PREPARING) {
-    if(capture_opts->real_time_mode) {
+    /* We didn't start a capture; note that the attempt to start it
-      capture_callback_invoke(capture_cb_capture_update_started, capture_opts);
+       failed. */
-    } else {
+    capture_callback_invoke(capture_cb_capture_failed, capture_opts);
-      capture_callback_invoke(capture_cb_capture_fixed_started, capture_opts);
-    }
-  }
-
-  if(capture_opts->real_time_mode) {
-    cf_read_status_t status;
-
-    /* Read what remains of the capture file. */
-    status = cf_finish_tail(capture_opts->cf, &err);
-
-    /* XXX: If -Q (quit-after-cap) then cf->count clr'd below so save it first */
-    packet_count_save = cf_get_packet_count(capture_opts->cf);
-    /* Tell the GUI we are not doing a capture any more.
-       Must be done after the cf_finish_tail(), so file lengths are 
-       correctly displayed */
-    capture_callback_invoke(capture_cb_capture_update_finished, capture_opts);
-
-    /* Finish the capture. */
-    switch (status) {
-
-    case CF_READ_OK:
-      if ((packet_count_save == 0) && !capture_opts->restart) {
-        simple_dialog(ESD_TYPE_INFO, ESD_BTN_OK,
-          "%sNo packets captured!%s\n"
-          "\n"
-          "As no data was captured, closing the %scapture file!\n"
-          "\n"
-          "\n"
-          "Help about capturing can be found at:\n"
-          "\n"
-          "       http://wiki.wireshark.org/CaptureSetup"
-#ifdef _WIN32
-          "\n\n"
-          "Wireless (Wi-Fi/WLAN):\n"
-          "Try to switch off promiscuous mode in the Capture Options!"
-#endif
-          "",
-          simple_dialog_primary_start(), simple_dialog_primary_end(),
-          cf_is_tempfile(capture_opts->cf) ? "temporary " : "");
-        cf_close(capture_opts->cf);
-      }
-      break;
-    case CF_READ_ERROR:
-      /* Just because we got an error, that doesn't mean we were unable
-         to read any of the file; we handle what we could get from the
-         file. */
-      break;
-
-    case CF_READ_ABORTED:
-      /* Exit by leaving the main loop, so that any quit functions
-         we registered get called. */
-      main_window_quit();
-      break;
-    }
-
   } else {
-    /* first of all, we are not doing a capture any more */
+    /* We started a capture; process what's left of the capture file if
-    capture_callback_invoke(capture_cb_capture_fixed_finished, capture_opts);
+       we were in "update list of packets in real time" mode, or process
+       all of it if we weren't. */
+    if(capture_opts->real_time_mode) {
+      cf_read_status_t status;
 
-    /* this is a normal mode capture and if no error happened, read in the capture file data */
+      /* Read what remains of the capture file. */
-    if(capture_opts->save_file != NULL) {
+      status = cf_finish_tail(capture_opts->cf, &err);
-      capture_input_read_all(capture_opts, cf_is_tempfile(capture_opts->cf),
+
-        cf_get_drops_known(capture_opts->cf), cf_get_drops(capture_opts->cf));
+      /* XXX: If -Q (quit-after-cap) then cf->count clr'd below so save it first */
+      packet_count_save = cf_get_packet_count(capture_opts->cf);
+      /* Tell the GUI we are not doing a capture any more.
+         Must be done after the cf_finish_tail(), so file lengths are 
+         correctly displayed */
+      capture_callback_invoke(capture_cb_capture_update_finished, capture_opts);
+
+      /* Finish the capture. */
+      switch (status) {
+
+      case CF_READ_OK:
+        if ((packet_count_save == 0) && !capture_opts->restart) {
+          simple_dialog(ESD_TYPE_INFO, ESD_BTN_OK,
+            "%sNo packets captured!%s\n"
+            "\n"
+            "As no data was captured, closing the %scapture file!\n"
+            "\n"
+            "\n"
+            "Help about capturing can be found at:\n"
+            "\n"
+            "       http://wiki.wireshark.org/CaptureSetup"
+#ifdef _WIN32
+            "\n\n"
+            "Wireless (Wi-Fi/WLAN):\n"
+            "Try to switch off promiscuous mode in the Capture Options!"
+#endif
+            "",
+            simple_dialog_primary_start(), simple_dialog_primary_end(),
+            cf_is_tempfile(capture_opts->cf) ? "temporary " : "");
+          cf_close(capture_opts->cf);
+        }
+        break;
+      case CF_READ_ERROR:
+        /* Just because we got an error, that doesn't mean we were unable
+           to read any of the file; we handle what we could get from the
+           file. */
+        break;
+
+      case CF_READ_ABORTED:
+        /* Exit by leaving the main loop, so that any quit functions
+           we registered get called. */
+        main_window_quit();
+        break;
+      }
+    } else {
+      /* first of all, we are not doing a capture any more */
+      capture_callback_invoke(capture_cb_capture_fixed_finished, capture_opts);
+
+      /* this is a normal mode capture and if no error happened, read in the capture file data */
+      if(capture_opts->save_file != NULL) {
+        capture_input_read_all(capture_opts, cf_is_tempfile(capture_opts->cf),
+          cf_get_drops_known(capture_opts->cf), cf_get_drops(capture_opts->cf));
+      }
     }
   }
 

capture.h

@@ -45,7 +45,8 @@ typedef enum {
     capture_cb_capture_fixed_started,
     capture_cb_capture_fixed_continue,
     capture_cb_capture_fixed_finished,
-    capture_cb_capture_stopping
+    capture_cb_capture_stopping,
+    capture_cb_capture_failed
 } capture_cbs;
 
 typedef void (*capture_callback_t) (gint event, capture_options *capture_opts,

file.c

@@ -364,6 +364,9 @@ fail:
  * want the UI to go from "file open" to "file closed" back to
  * "file open", we want it to go from "old file open" to "new file
  * open and being read".
+ *
+ * XXX - currently, cf_open() calls cf_close(), rather than
+ * cf_reset_state().
  */
 static void
 cf_reset_state(capture_file *cf)
@@ -428,18 +431,16 @@ cf_reset_state(capture_file *cf)
 void
 cf_close(capture_file *cf)
 {
-  /* do GUI things even if file is already closed,
+  if(cf->state != FILE_CLOSED) {
-   * e.g. to cleanup things if a capture couldn't be started */
+    cf_callback_invoke(cf_cb_file_closing, cf);
-  cf_callback_invoke(cf_cb_file_closing, cf);
 
   /* close things, if not already closed before */
-  if(cf->state != FILE_CLOSED) {
     color_filters_cleanup();
     cf_reset_state(cf);
     cleanup_dissection();
-  }
 
-  cf_callback_invoke(cf_cb_file_closed, cf);
+    cf_callback_invoke(cf_cb_file_closed, cf);
+  }
 }
 
 /* an out of memory exception occured, wait for a user button press to exit */

ui/gtk/main.c

@@ -1647,7 +1647,6 @@ main_capture_cb_capture_fixed_finished(capture_options *capture_opts _U_)
         main_do_quit();
     }
 }
-
 #endif  /* HAVE_LIBPCAP */
 
 static void
@@ -1791,6 +1790,9 @@ main_capture_callback(gint event, capture_options *capture_opts, gpointer user_d
         gtk_osxapplication_set_dock_icon_pixbuf(theApp,gdk_pixbuf_new_from_xpm_data(wsicon64_xpm));
 #endif
         break;
+    case(capture_cb_capture_failed):
+        g_log(LOG_DOMAIN_MAIN, G_LOG_LEVEL_DEBUG, "Callback: capture failed");
+        break;
     default:
         g_warning("main_capture_callback: event %u unknown", event);
         g_assert_not_reached();
@@ -3017,7 +3019,7 @@ main(int argc, char *argv[])
         g_free(s);
       }
       /* "-k" was specified; start a capture. */
-      show_main_window(TRUE);
+      show_main_window(FALSE);
       check_and_warn_user_startup(cf_name);
 
       /* If no user interfaces were specified on the command line,

ui/gtk/main_statusbar.c

@@ -899,6 +899,20 @@ statusbar_capture_fixed_finished_cb(capture_options *capture_opts _U_)
     gtk_statusbar_pop(GTK_STATUSBAR(packets_bar), packets_ctx);
 }
 
+static void
+statusbar_capture_failed_cb(capture_options *capture_opts _U_)
+{
+#if 0
+    capture_file *cf = capture_opts->cf;
+#endif
+
+    /* Pop the "<live capture in progress>" message off the status bar. */
+    statusbar_pop_file_msg();
+    welcome_header_pop_msg();
+
+    /* Pop the "<capturing>" message off the status bar */
+    gtk_statusbar_pop(GTK_STATUSBAR(packets_bar), packets_ctx);
+}
 #endif /* HAVE_LIBPCAP */
 
 
@@ -1011,6 +1025,9 @@ statusbar_capture_callback(gint event, capture_options *capture_opts,
         /* Beware: this state won't be called, if the capture child
          * closes the capturing on it's own! */
         break;
+    case(capture_cb_capture_failed):
+        statusbar_capture_failed_cb(capture_opts);
+        break;
     default:
         g_warning("statusbar_capture_callback: event %u unknown", event);
         g_assert_not_reached();