Validating an unvalidated foreign key that references a partitioned
table would try to queue validations for each individual partition of
the referenced table, but this is wrong: each individual partition would
not necessarily have all the referenced rows, so errors would be raised.
Avoid doing that. The pg_constraint rows that cause this to happen are
only there to support the action triggers that implement the DELETE/
UPDATE actions of the FK, so no validating scan is necessary.
This was an oversight in commit b663b9436e75.
An equivalent oversight exists for NOT ENFORCED constraints, which is
not fixed in this commit.
Author: Amul Sul <sulamul@gmail.com>
Reported-by: Antonin Houska <ah@cybertec.at>
Reviewed-by: jian he <jian.universality@gmail.com>
Reviewed-by: Tender Wang <tndrwang@gmail.com>
Discussion: https://postgr.es/m/26983.1748418675@localhost
The choices made in commit 01463e1cc might pose copyright hazards,
and are more cutesy than informative anyway.
Reported-by: Noah Misch <noah@leadboat.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20250415155850.9b.nmisch@google.com
Commit d696406a9b2 added a new join to the query for extensions, but did
so in the wrong place, causing the AND clause to be applied to the wrong
join.
Author: Suraj Kharage <suraj.kharage@enterprisedb.com>
Reviewed-By: Dilip Kumar <dilipbalaut@gmail.com>
Discussion: https://postgr.es/m/CAF1DzPVBrN-cmPB2zb7ZU=2J4vEF2fNdArGCG9w+9fnKq4v8tg@mail.gmail.com
This commit replaces the formula used for "TotalProcs" with a call to
pgaio_uring_procs() in pgaio_uring_shmem_init() for the shared memory
initialization, which is exactly the same, removing a duplication.
pgaio_uring_procs() is used for shared memory sizing and a sanity check,
and it has some documentation explaining some reasoning behind the
formula.
Author: Japin Li <japinli@hotmail.com>
Discussion: https://postgr.es/m/ME0P300MB044521067A1EDDA9EDEC3793B66DA@ME0P300MB0445.AUSP300.PROD.OUTLOOK.COM
The documentation for the pg_authid system catalog and the
pg_shadow system view indicates that passwords might be stored in
cleartext, but that hasn't been possible for some time.
Oversight in commit eb61136dc7.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/aD2yKkZro4nbl5ol%40nathan
Backpatch-through: 13
Commit 4f7f7b03758 implemented the extension_control_path GUC, and to
make it work it was decided that we should strip the $libdir/ on
module_pathname from .control files, so that extensions don't need to
worry about this change.
This strip logic was implemented on expand_dynamic_library_name()
which works fine when executing the SQL functions from extensions, but
this function is also called when the LOAD command is executed, and
since the user may explicitly pass the $libdir prefix on LOAD
parameter, we should not strip in this case.
This commit fixes this issue by moving the strip logic from
expand_dynamic_library_name() to load_external_function() that is
called when the running the SQL script from extensions.
Reported-by: Evan Si <evsi@amazon.com>
Author: Matheus Alcantara <matheusssilv97@gmail.com>
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Rahila Syed <rahilasyed90@gmail.com>
Bug: #18920
Discussion: https://www.postgresql.org/message-id/flat/18920-b350b1c0a30af006%40postgresql.org
When the backend reads COPY data, it ignores all sync messages, as per
c01641f8aed0. With psql pipelines, it is possible to manually send sync
messages with \sendpipeline which leaves the frontend in an
unrecoverable state as the backend will not send the necessary
ReadyForQuery message that is expected to feed psql result consumption
logic.
It could be possible to artificially reduce the piped_syncs and
requested_results, however libpq's state would still have queued sync
messages in its command queue, and the only way to consume those without
directly calling pqCommandQueueAdvance() is to process ReadyForQuery
messages that won't be sent since the backend ignores these. Perhaps
this could be improved in the future, but I am not really excited about
introducing this amount of complications in libpq to manipulate the
message queues without a better use case to support it.
Hence, this patch aborts the connection if we detect excessive sync
messages after a COPY in a pipeline to avoid staying in an inconsistent
protocol state, which is the best thing we can do with pipelines in
psql for now. Note that this change does not prevent wrapping a set
of queries inside a block made of \startpipeline and \endpipeline, only
the use of \syncpipeline for a COPY.
Reported-by: Nikita Kalinin <n.kalinin@postgrespro.ru>
Author: Anthonin Bonnefoy <anthonin.bonnefoy@datadoghq.com>
Discussion: https://postgr.es/m/18944-8a926c30f68387dd@postgresql.org
POSIX allows such platforms. Given the lack of complaints, we may not
currently test on such a platform. This is new in v18 (commit
7d5c83b4e90c7156655f98b7312a30ae5eeb4d27), so no back-patch.
This commit renames the GUC log_lock_failure to log_lock_failures
to align with the existing similar setting log_lock_waits, which uses
the plural form. This improves naming consistency across related GUCs.
Suggested-by: Peter Eisentraut <peter@eisentraut.org>
Author: Fujii Masao <masao.fujii@gmail.com
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/7a8198b6-d5b8-4910-b41e-8d3efcbb015d@eisentraut.org
We store values for these options as array elements with the syntax
"name=value", hence a name containing "=" confuses matters when
it's time to read the array back in. Since validation of the
options is often done (long) after this conversion to array format,
that leads to confusing and off-point error messages. We can
improve matters by rejecting names containing "=" up-front.
(Probably a better design would have involved pairs of array
elements, but it's too late now --- and anyway, there's no
evident use-case for option names like this. We already
reject such names in some other contexts such as GUCs.)
Reported-by: Chapman Flack <jcflack@acm.org>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Chapman Flack <jcflack@acm.org>
Discussion: https://postgr.es/m/6830EB30.8090904@acm.org
Backpatch-through: 13
052026c9b9 mistakenly reordered setup steps in heap_vacuum_rel(),
incorrectly moving RelationGetNumberOfBlocks() before
vacuum_get_cutoffs().
OldestXmin must be determined before RelationGetNumberOfBlocks()
calculates the number of blocks in the relation that will be vacuumed.
Otherwise tuples older than OldestXmin may be inserted into the end of
the relation into blocks that are not vacuumed. If additional tuples
newer than those inserted into unscanned blocks but older than
OldestXmin are inserted into free space earlier in the relation, the
result could be advancing pg_class.relfrozenxid to a newer value than an
unfrozen XID in one of the unscanned heap pages.
Assigning an incorrect relfrozenxid can lead to data loss, so it is
imperative that it correctly reflect the oldest unfrozen xid.
Reported-by: Peter Geoghegan <pg@bowt.ie>
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-WzntqvVEdbbpqG5JqSZGuLWmy4PBfUO-OswfivKchr2gvw%40mail.gmail.com
Commit 7406ab623fe added a gist support function that we internally
refer to by the symbol GIST_STRATNUM_PROC. This translated from
"well-known" strategy numbers to opfamily-specific strategy numbers.
However, we later (commit 630f9a43cec) changed this to fit into
index-AM-level compare type mapping, so this function actually now
maps from compare type to opfamily-specific strategy numbers. So this
name is no longer fitting.
Moreover, the index AM level also supports the opposite, a function to
map from strategy number to compare type. This is currently not
supported in gist, but one might wonder what this function is supposed
to be called when it is added.
This patch changes the naming of the gist-level functionality to be
more in line with the index-AM-level functionality. This makes sense
because these are essentially the same thing on different levels.
This also changes the names of the externally visible functions that
are provided for use as such a support function.
Reviewed-by: Paul A Jungwirth <pj@illuminatedcomputing.com>
Discussion: https://www.postgresql.org/message-id/37ebb1d9-9036-485f-a215-e55435689917%40eisentraut.org
A cascading WAL sender doing logical decoding (as known as doing its
work on a standby) has been using as flush LSN the value returned by
GetStandbyFlushRecPtr() (last position safely flushed to disk). This is
incorrect as such processes are only able to decode changes up to the
LSN that has been replayed by the startup process.
This commit changes cascading logical WAL senders to use the replay LSN,
as returned by GetXLogReplayRecPtr(). This distinction is important
particularly during shutdown, when WAL senders need to send any
remaining available data to their clients, switching WAL senders to a
caught-up state. Using the latest flush LSN rather than the replay LSN
could cause the WAL senders to be stuck in an infinite loop preventing
them to shut down, as the startup process does not run when WAL senders
attempt to catch up, so they could keep waiting for work that would
never happen.
Backpatch down to v16, where logical decoding on standbys has been
introduced.
Author: Alexey Makhmutov <a.makhmutov@postgrespro.ru>
Reviewed-by: Ajin Cherian <itsajin@gmail.com>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/52138028-7246-421c-9161-4fa108b88070@postgrespro.ru
Backpatch-through: 16
PLy_elog_impl and its subroutine PLy_traceback intended to avoid
leaking any PyObject reference counts, but their coverage of the
matter was sadly incomplete. In particular, out-of-memory errors
in most of the string-construction subroutines could lead to
reference count leaks, because those calls were outside the
PG_TRY blocks responsible for dropping reference counts.
Fix by (a) adjusting the scopes of the PG_TRY blocks, and
(b) moving the responsibility for releasing the reference counts
of the traceback-stack objects to PLy_elog_impl. This requires
some additional "volatile" markers, but not too many.
In passing, fix an ancient thinko: use of the "e_module_o" PyObject
was guarded by "if (e_type_s)", where surely "if (e_module_o)"
was meant. This would only have visible consequences if the
"__name__" attribute were present but the "__module__" attribute
wasn't, which apparently never happens; but someday it might.
Rearranging the PG_TRY blocks requires indenting a fair amount
of code one more tab stop, which I'll do separately for clarity.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/2954090.1748723636@sss.pgh.pa.us
Backpatch-through: 13
Previously, postgres_fdw always 1) opened a remote transaction in READ
WRITE mode even when the local transaction was READ ONLY, causing a READ
ONLY transaction using it that references a foreign table mapped to a
remote view executing a volatile function to write in the remote side,
and 2) opened the remote transaction in NOT DEFERRABLE mode even when
the local transaction was DEFERRABLE, causing a SERIALIZABLE READ ONLY
DEFERRABLE transaction using it to abort due to a serialization failure
in the remote side.
To avoid these, modify postgres_fdw to open a remote transaction in the
same access/deferrable modes as the local transaction. This commit also
modifies it to open a remote subtransaction in the same access mode as
the local subtransaction.
Although these issues exist since the introduction of postgres_fdw,
there have been no reports from the field. So it seems fine to just fix
them in master only.
Author: Etsuro Fujita <etsuro.fujita@gmail.com>
Reviewed-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAPmGK16n_hcUUWuOdmeUS%2Bw4Q6dZvTEDHb%3DOP%3D5JBzo-M3QmpQ%40mail.gmail.com
When a MERGE's target table is the parent of an inheritance tree, any
INSERT actions insert into the parent table using ModifyTableState's
rootResultRelInfo. However, there are two bugs in the way is
initialized:
1. ExecInitMerge() incorrectly uses a different ResultRelInfo entry
from ModifyTableState's resultRelInfo array to build the insert
projection, which may not be compatible with rootResultRelInfo.
2. ExecInitModifyTable() does not fully initialize rootResultRelInfo.
Specifically, ri_WithCheckOptions, ri_WithCheckOptionExprs,
ri_returningList, and ri_projectReturning are not initialized.
This can lead to crashes, or incorrect query results due to failing to
check WCO's or process the RETURNING list for INSERT actions.
Fix both these bugs in ExecInitMerge(), noting that it is only
necessary to fully initialize rootResultRelInfo if the MERGE has
INSERT actions and the target table is a plain inheritance parent.
Backpatch to v15, where MERGE was introduced.
Reported-by: Andres Freund <andres@anarazel.de>
Author: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: Jian He <jian.universality@gmail.com>
Reviewed-by: Tender Wang <tndrwang@gmail.com>
Discussion: https://postgr.es/m/4rlmjfniiyffp6b3kv4pfy4jw3pciy6mq72rdgnedsnbsx7qe5@j5hlpiwdguvc
Backpatch-through: 15
uint64 was chosen to be consistent with the type used by the query ID,
but the conclusion of a recent discussion for the query ID is that int64
is a better fit as the signed form is shown to the user, for PGSS or
EXPLAIN outputs.
This commit changes the plan ID to use int64, following c3eda50b0648
that has done the same for the query ID.
The plan ID is new to v18, introduced in 2a0cd38da5cc.
Author: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Sami Imseih <samimseih@gmail.com>
Discussion: https://postgr.es/m/aCvzJNwetyEI3Sgo@paquier.xyz
A few places that access system catalogs don't set up an active
snapshot before potentially accessing their TOAST tables. To fix,
push an active snapshot just before each section of code that might
require accessing one of these TOAST tables, and pop it shortly
afterwards. While at it, this commit adds some rather strict
assertions in an attempt to prevent such issues in the future.
Commit 16bf24e0e4 recently removed pg_replication_origin's TOAST
table in order to fix the same problem for that catalog. On the
back-branches, those bugs are left in place. We cannot easily
remove a catalog's TOAST table on released major versions, and only
replication origins with extremely long names are affected. Given
the low severity of the issue, fixing older versions doesn't seem
worth the trouble of significantly modifying the patch.
Also, on v13 and v14, the aforementioned strict assertions have
been omitted because commit 2776922201, which added
HaveRegisteredOrActiveSnapshot(), was not back-patched. While we
could probably back-patch it now, I've opted against it because it
seems unlikely that new TOAST snapshot issues will be introduced in
the oldest supported versions.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/18127-fe54b6a667f29658%40postgresql.org
Discussion: https://postgr.es/m/18309-c0bf914950c46692%40postgresql.org
Discussion: https://postgr.es/m/ZvMSUPOqUU-VNADN%40nathan
Backpatch-through: 13
postgres_fdw tries to use PG_TRY blocks to ensure that it will
eventually free the PGresult created by the remote modify command.
However, it's fundamentally impossible for this scheme to work
reliably when there's RETURNING data, because the query could fail
in between invocations of postgres_fdw's DirectModify methods.
There is at least one instance of exactly this situation in the
regression tests, and the ensuing session-lifespan leak is visible
under Valgrind.
We can improve matters by using a memory context reset callback
attached to the ExecutorState context. That ensures that the
PGresult will be freed when the ExecutorState context is torn
down, even if control never reaches postgresEndDirectModify.
I have little faith that there aren't other potential PGresult
leakages in the backend modules that use libpq. So I think it'd
be a good idea to apply this concept universally by creating
infrastructure that attaches a reset callback to every PGresult
generated in the backend. However, that seems too invasive for
v18 at this point, let alone the back branches. So for the
moment, apply this narrow fix that just makes DirectModify safe.
I have a patch in the queue for the more general idea, but it
will have to wait for v19.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Matheus Alcantara <matheusssilv97@gmail.com>
Discussion: https://postgr.es/m/2976982.1748049023@sss.pgh.pa.us
Backpatch-through: 13
Our GSSAPI code only allows packet sizes up to 16kB. However it
emerges that during authentication, larger packets might be needed;
various authorities suggest 48kB or 64kB as the maximum packet size.
This limitation caused login failure for AD users who belong to many
AD groups. To add insult to injury, we gave an unintelligible error
message, typically "GSSAPI context establishment error: The routine
must be called again to complete its function: Unknown error".
As noted in code comments, the 16kB packet limit is effectively a
protocol constant once we are doing normal data transmission: the
GSSAPI code splits the data stream at those points, and if we change
the limit then we will have cross-version compatibility problems
due to the receiver's buffer being too small in some combinations.
However, during the authentication exchange the packet sizes are
not determined by us, but by the underlying GSSAPI library. So we
might as well just try to send what the library tells us to.
An unpatched recipient will fail on a packet larger than 16kB,
but that's not worse than the sender failing without even trying.
So this doesn't introduce any meaningful compatibility problem.
We still need a buffer size limit, but we can easily make it be
64kB rather than 16kB until transport negotiation is complete.
(Larger values were discussed, but don't seem likely to add
anything.)
Reported-by: Chris Gooch <cgooch@bamfunds.com>
Fix-suggested-by: Jacob Champion <jacob.champion@enterprisedb.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Jacob Champion <jacob.champion@enterprisedb.com>
Discussion: https://postgr.es/m/DS0PR22MB5971A9C8A3F44BCC6293C4DABE99A@DS0PR22MB5971.namprd22.prod.outlook.com
Backpatch-through: 13
Previously, XactLockTableWait() and ConditionalXactLockTableWait() could enter
a non-interruptible loop when they successfully acquired a lock on a transaction
but the transaction still appeared to be running. Since this loop continued
until the transaction completed, it could result in long, uninterruptible waits.
Although this scenario is generally unlikely since XactLockTableWait() and
ConditionalXactLockTableWait() can basically acquire a transaction lock
only when the transaction is not running, it can occur in a hot standby.
In such cases, the transaction may still appear active due to
the KnownAssignedXids list, even while no lock on the transaction exists.
For example, this situation can happen when creating a logical replication
slot on a standby.
The cause of the non-interruptible loop was the absence of CHECK_FOR_INTERRUPTS()
within it. This commit adds CHECK_FOR_INTERRUPTS() to the loop in both functions,
ensuring they can be interrupted safely.
Back-patch to all supported branches.
Author: Kevin K Biju <kevinkbiju@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/CAM45KeELdjhS-rGuvN=ZLJ_asvZACucZ9LZWVzH7bGcD12DDwg@mail.gmail.com
Backpatch-through: 13
uint64 was perhaps chosen in cff440d36 as the type was uint32 prior to
that widening work.
Having this as uint64 doesn't make much sense and just adds the overhead of
having to remember that we always output this in its signed form. Let's
remove that overhead.
The signed form output is seemingly required since we have no way to
represent the full range of uint64 in an SQL type. We use BIGINT in places
like pg_stat_statements, which maps directly to int64.
The release notes "Source Code" section may want to mention this
adjustment as some extensions may wish to adjust their code.
Author: David Rowley <dgrowleyml@gmail.com>
Suggested-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Sami Imseih <samimseih@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/50cb0c8b-994b-48f9-a1c4-13039eb3536b@eisentraut.org
If we hit out-of-memory between creating the PGconn and inserting
it into dblink's hashtable, we'd lose track of the PGconn, which
is quite bad since it represents a live connection to a remote DB.
Fix by rearranging things so that we create the hashtable entry
first.
Also reduce the number of states we have to deal with by getting rid
of the separately-allocated remoteConn object, instead allocating it
in-line in the hashtable entries. (That incidentally removes a
session-lifespan memory leak observed in the regression tests.)
There is an apparently-irreducible remaining OOM hazard, which
is that if the connection fails at the libpq level (ie it's
CONNECTION_BAD) then we have to pstrdup the PGconn's error message
before we can release it, and theoretically that could fail. However,
in such cases we're only leaking memory not a live remote connection,
so I'm not convinced that it's worth sweating over.
This is a pretty low-probability failure mode of course, but losing
a live connection seems bad enough to justify back-patching.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Matheus Alcantara <matheusssilv97@gmail.com>
Discussion: https://postgr.es/m/1346940.1748381911@sss.pgh.pa.us
Backpatch-through: 13
An assertion test added in commit 049ef33 could fail when pg_prewarm()
was called on objects without storage, such as partitioned tables.
This resulted in the following failure in assert-enabled builds:
Failed Assert("RelFileNumberIsValid(rlocator.relNumber)")
Note that, in non-assert builds, pg_prewarm() just failed with an error
in that case, so there was no ill effect in practice.
This commit fixes the issue by having pg_prewarm() raise an error early
if the specified object has no storage. This approach is similar to
the fix in commit 4623d7144 for pg_freespacemap.
Back-patched to v17, where the issue was introduced.
Author: Masahiro Ikeda <ikedamsh@oss.nttdata.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Richard Guo <guofenglinux@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/e082e6027610fd0a4091ae6d033aa117@oss.nttdata.com
Backpatch-through: 17
Oversight in c325a7633fcb, where the LWLock tranche AioUringCompletion
has been added.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/aDT5sBOxJTdulXnE@paquier.xyz
pg_stat_statements anticipates that certain constant locations may be
recorded multiple times and attempts to avoid calculating a length for
these locations in fill_in_constant_lengths().
However, during generate_normalized_query() where normalized query
strings are generated, these locations are not excluded from
consideration. This could increment the parameter number counter for
every recorded occurrence at such a location, leading to an incorrect
normalization in certain cases with gaps in the numbers reported.
For example, take this query:
SELECT WHERE '1' IN ('2'::int, '3'::int::text)
Before this commit, it would be normalized like that, with gaps in the
parameter numbers:
SELECT WHERE $1 IN ($3::int, $4::int::text)
However the correct, less confusing one should be like that:
SELECT WHERE $1 IN ($2::int, $3::int::text)
This commit fixes the computation of the parameter numbers to track the
number of constants replaced with an $n by a separate counter instead of
the iterator used to loop through the list of locations.
The underlying query IDs are not changed, neither are the normalized
strings for existing PGSS hash entries. New entries with fresh
normalized queries would automatically get reshaped based on the new
parameter numbering.
Issue discovered while discussing a separate problem for HEAD, but this
affects all the stable branches.
Author: Sami Imseih <samimseih@gmail.com>
Discussion: https://postgr.es/m/CAA5RZ0tzxvWXsacGyxrixdhy3tTTDfJQqxyFBRFh31nNHBQ5qA@mail.gmail.com
Backpatch-through: 13
ParseFraction only expects to deal with fields that contain a decimal
point and digit(s). However it's possible in some edge cases for it
to be passed input that doesn't look like that. In particular the
input could look like a valid floating-point number, such as ".123e6".
strtod() will happily eat that, possibly producing a result that is
not within the expected range 0..1, which can result in integer
overflow in the callers. That doesn't have any security consequences,
but it's still not very desirable. Fix by checking that the input
has the expected form.
Similarly, DecodeNumberField only expects to deal with fields that
contain a decimal point and digit(s), but it's sometimes abused to
parse strings that might not look like that. This could result in
failure to reject bogus input, yielding silly results. Again, fix
by rejecting input that doesn't look as-expected. That decision
also means that we can affirmatively answer the very old comment
questioning whether we couldn't save some duplicative code by
using ParseFractionalSecond here.
While these changes should only reject input that nobody would
consider valid, it still doesn't seem like a change to make in
stable branches. Apply to HEAD only.
Reported-by: Evgeniy Gorbanev <gorbanev.es@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/1328335.1748371099@sss.pgh.pa.us
In pl_comp.c, initially create the plpgsql function's cache context
under the assumed-short-lived caller's context, and reparent it under
CacheMemoryContext only upon success. This avoids a process-lifespan
leak of 8kB or more if the function contains syntax errors. (This
leakage has existed for a long time without many complaints, but as
we move towards a possibly multi-threaded future, getting rid of
process-lifespan leaks grows more important.)
In funccache.c, arrange to reclaim the CachedFunction struct in case
the language-specific compile callback function throws an error;
previously, that resulted in an independent process-lifespan leak.
This is arguably a new bug in v18, since the leakage now occurred
for SQL-language functions as well as plpgsql.
Also, don't fill fn_xmin/fn_tid/dcallback until after successful
completion of the compile callback. This avoids a scenario where a
partially-built function cache might appear already valid upon later
inspection, and another scenario where dcallback might fail upon being
presented with an incomplete cache entry. We would have to reach such
a faulty cache entry via a pre-existing fn_extra pointer, so I'm not
sure these scenarios correspond to any live bug. (The predecessor
code in pl_comp.c never took any care about this, and we've heard no
complaints about that.) Still, it's better to be careful.
Given the lack of field complaints, I'm not very excited about
back-patching any of this; but it seems still in-scope for v18.
Discussion: https://postgr.es/m/999171.1748300004@sss.pgh.pa.us
As written, the test was throwing an error because of an unbalanced
parenthesis. The regex used in the test is adjusted to not fail and to
test the case of an opening parenthesis in a character class after some
nested square brackets.
Oversight in d46911e584d4.
Discussion: https://postgr.es/m/16ab039d1af455652bdf4173402ddda145f2c73b.camel@cybertec.at
The code that translates SIMILAR TO pattern matching expressions to
POSIX-style regular expressions did not consider that square brackets
can be nested. For example, in an expression like [[:alpha:]%_], the
logic replaced the placeholders '_' and '%' but it should not.
This commit fixes the conversion logic by tracking the nesting level of
square brackets marking character class areas, while considering that
in expressions like []] or [^]] the first closing square bracket is a
regular character. Multiple tests are added to show how the conversions
should or should not apply applied while in a character class area, with
specific cases added for all the characters converted outside character
classes like an opening parenthesis '(', dollar sign '$', etc.
Author: Laurenz Albe <laurenz.albe@cybertec.at>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/16ab039d1af455652bdf4173402ddda145f2c73b.camel@cybertec.at
Backpatch-through: 13
Set the default behavior of pg_dump and pg_dumpall to be
--no-statistics.
Leave the default for pg_restore and pg_upgrade to be
--with-statistics.
Discussion: https://postgr.es/m/CA+TgmoZ9=RnWcCOZiKYYjZs_AW1P4QXCw--h4dOLLHuf1Omung@mail.gmail.com
Reviewed-by: Greg Sabino Mullane <htamfids@gmail.com>
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Previously, we asserted that the eager scan's success and failure
counters were positive before decrementing them. However, this
assumption was incorrect, as it's possible that some blocks have
already been eagerly scanned by the time eager scanning is disabled.
This commit replaces the assertions with guards to handle this
scenario gracefully.
With this change, we continue to allow read-ahead operations by the
read stream that exceed the success and failure caps. While there is a
possibility that overruns will trigger eager scans of additional
pages, this does not pose a practical concern as the overruns will not
be substantial and remain within an acceptable range.
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://postgr.es/m/CAD21AoConf6tkVCv-=JhQJj56kYsDwo4jG5+WqgT+ukSkYomSQ@mail.gmail.com
The test did not wait for all the subscriptions to have caught up when
dropping the subscription "tab_copy". In a slow environment, it could
be possible for the replay of the COMMIT PREPARED transaction "mygid"
to not be confirmed yet, causing one prepared transaction to be left
around before moving to the next steps of the test.
One failure noticed is a transaction found in pg_prepared_xacts for the
cases where copy_data = false and two_phase = true, but there should be
none after dropping the subscription.
As an extra safety measure, a check is added before dropping the
subscription, scanning pg_prepared_xacts to make sure that no prepared
transactions are left once both subscriptions have caught up.
Issue introduced by a8fd13cab0ba, fixing a problem similar to
eaf5321c3524.
Per buildfarm member kestrel.
Author: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/CALDaNm329QaZ+bwU--bW6GjbNSZ8-38cDE8QWofafub7NV67oA@mail.gmail.com
Backpatch-through: 15
To improve the usability of logical replication examples, we need to
enable bulk copy-pasting of DML/DDL series.
Currently, output command tags and prompts disrupt this workflow. While
prompts are typically removed, converting them to comments is acceptable
here, given the multi-server context.
Additionally, ensure all examples containing operators like < and > are
wrapped in CDATA blocks to guarantee correct rendering and consistency
with other places.
Author: David G. Johnston <david.g.johnston@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Discussion: https://postgr.es/m/CAKFQuwbhbL1uaDTuo9shmo1rA-fX6XGotR7qZQ7rd-ia5ZDoQA@mail.gmail.com
